Tobias GesellchenandClaude Opus 4.7
a08c2c3072
"Test first, decide later" affordance: the same check sequence Apply
runs is now reachable without committing to the migration. Useful
for spot-checking a speaker after editing URLs, or for verifying a
fresh device is reachable before the user commits to writing
anything.
Two buttons, one per Apply path:
- #plan-preflight-btn (Suggested Plan side) — reads the chosen
method from plan-apply-btn.dataset.method, same source the
real Apply uses, so what's tested matches what would be
applied.
- #customize-preflight-btn (Custom Plan side) — walks the same
radio choices applyCustomPlan reads and builds the same
methods array, then runs the checks against it.
Both share the existing pre-flight panel and runApplyPreflight
orchestrator. New renderPreflightPreviewSummary terminates the
panel with a single Close button instead of Proceed Anyway /
Cancel — there's nothing to proceed to in preview mode.
Both Pre-flight buttons share the disabled-state gate of their
Apply counterparts (no plan / invalid URLs disables both) so users
can't accidentally pre-flight a plan that wouldn't apply.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Bose SoundTouch Toolkit
Independent project. Not affiliated with or endorsed by Bose Corporation.
Context: Cloud Shutdown
Bose is shutting down SoundTouch cloud services on May 6, 2026. After that, music service browsing, preset sync, and the official SoundTouch app stop working. This toolkit lets you keep your speakers fully functional.
See the Survival Guide for the full picture.
Tools
soundtouch-service — AfterTouch
A local server that replaces the Bose cloud ("AfterTouch"). Once your speaker is redirected to it, you have full control without any Bose cloud dependency. The built-in web UI at http://localhost:8000 handles all setup — no config files needed to get started.
If you want to run a server for this - no problem. The service is small enough to run on the SoundTouch itself. See the On-Device Installer for instructions.
Two scenarios:
Before shutdown — migrate your existing setup
While the Bose cloud is still running, use soundtouch-backup to save your account data. The local service web UI then helps with the migration so your speaker keeps its presets and credentials.
After shutdown or factory reset — start fresh Create a local account, configure your speakers, and start using them immediately. No Bose infrastructure required.
Redirecting your speaker
The service needs a stable address on your local network (e.g. soundtouch.fritz.box or soundtouch.local). The speaker must then be redirected to resolve the Bose cloud hostnames to that address. Two supported methods:
| Method | How it works | Notes |
|---|---|---|
| XML redirect | Upload a config XML via the Web API | Surgical; covers only registered endpoints; best for testing |
| DNS/DHCP | Serve custom DNS on your network | Covers all devices at once; requires port 53 and TLS |
The web UI walks you through each method. DNS redirect requires HTTPS — the service manages its own CA certificate and the web UI guides you through trusting it on each speaker.
Note: A hosts-file method (direct SSH edits to
/etc/hosts) also exists in the codebase but is deprecated and not exposed in the web UI.
Enabling SSH via USB stick
Some setup steps require SSH access to the speaker. Enable it once per device: create a file named remote_services on a FAT-formatted USB drive (the drive may need its bootable flag set — see SoundCork issue #172), and insert it while the speaker is powered on. After reboot, root SSH is available with no password.
See Device Initial Setup and Migration Guide for step-by-step instructions.
soundtouch-backup
Backs up your Bose cloud account (presets, paired devices, music sources) and each speaker's local state before the shutdown. Run soundtouch-backup all to capture everything in one step; it authenticates with the Bose cloud, then polls each paired speaker over the local network.
See the soundtouch-backup README for usage.
soundtouch-cli
Command-line control of any SoundTouch device: play/pause/volume, presets, source selection, multiroom zones, device discovery, and more. Works entirely over the local network — no cloud dependency. Well-suited for scripting and home automation.
See the CLI Reference for full usage.
soundtouch-web
A standalone web UI for device control — play, pause, volume, preset selection, real-time status — served from a local Go binary. Complements soundtouch-service when you want a dedicated device-control interface separate from the setup/admin UI.
See the soundtouch-web README for usage.
Go library
pkg/client provides a Go API for all SoundTouch device endpoints: media control, volume, presets, sources, zones, real-time WebSocket events, and device discovery. Use it to build your own integrations.
go get github.com/gesellix/bose-soundtouch
See the API Reference and pkg.go.dev for documentation.
Documentation
- Getting Started
- Survival Guide
- Migration Guide
- Device Initial Setup
- Migration & Safety Guide
- CLI Reference
- SoundTouch Service Guide
- HTTPS & CA Setup
- API Reference
Related projects
- SoundCork (Deborah Kaplan et al.) — Python service interception; pioneered the cloud emulation approach this project builds on
- SoundCork Stockholm App — Companion app for SoundCork
- SoundTouch Plus (Todd Lucas) — Home Assistant integration; extensive undocumented API documentation
- ÜberBöse API (Julius) — API research and advanced endpoint discovery
- Bose SoundTouch Hook (Adrian Böckenkamp) —
LD_PRELOADhooking for reverse engineering device internals
Support
- Bug reports: GitHub Issues
- Questions & discussions: GitHub Discussions
Star this project ⭐ if you find it useful!
License
MIT — see LICENSE.
SoundTouch is a trademark of Bose Corporation.