The Space Limitation section still described update safety as an open
problem ("we are currently working on this"). Replace it with what the
installer now actually does: gzip-compressed backups, a preflight
disk-space check with an interactive confirm-or-abort before skipping
the backup, and a hard abort before downloading anything if there
isn't even room for the update itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The gzip fix in the previous commit only helps once a backup is being
made; it doesn't address the actual moment that broke on real hardware:
the cross-device mv/copy of the new binary into place ran out of space
mid-write, leaving a truncated, non-executable binary as the live one.
UBIFS is a log-structured flash filesystem, so space "freed" by
overwriting the old binary isn't guaranteed reusable in time for the new
one to land -- this happened on a device with 15.7MB available against
a ~14.8MB binary.
Add a preflight check before downloading anything: fetch the new
binary's real size via a HEAD request (adapts automatically as binaries
grow, instead of a threshold that goes stale every release) and compare
against available space plus a flat 5MB safety margin.
- Comfortably enough room for old + new + a compressed backup: proceed
exactly as before, silently.
- Enough for old + new but not enough extra for a backup: warn
interactively and require explicit confirmation before proceeding
without one. Reads from /dev/tty since the script is normally piped
via `curl | sh` (stdin is consumed by the script itself). Defaults to
the safe choice (abort) on empty input, matching the [y/N] prompt.
AFTERTOUCH_FORCE_NO_BACKUP=yes overrides for non-interactive/scripted
use.
- Not enough room even for the replace itself: abort before starting
the download, rather than attempting a doomed download/replace that
could leave a truncated live binary.
- No TTY available and the operator didn't set the override: abort
rather than silently guessing.
- HEAD request fails for any reason: skip the check with a warning
rather than blocking the install on it.
Verified: all five decision branches (plenty of room, warn+decline,
warn+confirm, warn+forced-override, hard abort) produce the correct
result under both dash and a real BusyBox v1.38.0 container, including
the gzip/gunzip streaming backup and glob-based pruning from the
previous commit. The HEAD-request size lookup was separately verified
against a live GitHub release URL with real curl -- catching and fixing
a bug where naively taking the first "content-length:" header grabbed
the 302 redirect's (0), not the actual asset's, size. Not yet re-tested
end-to-end on real hardware.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Binaries are tens of MB and only growing (Go 1.27 alone added ~655KB
to soundtouch-service via its own new stdlib defaults, unrelated to
this project's code), while the on-device install target (/mnt/nv) is
only tens of MB total. A user already hit "no space left on device"
attempting an update on real hardware.
Stream the pre-update backup straight through gzip instead of cp-then-
gzip: at that point in the script the old binary is still live and the
newly-downloaded one is already sitting in the temp dir, so writing an
intermediate uncompressed backup copy would briefly need three full
binary-sized copies on disk at once. Streaming avoids ever creating
that intermediate copy. Falls back to a plain uncompressed backup if
gzip is unavailable or the stream fails partway, matching prior
behavior exactly.
Both GC loops (pre- and post-install) now also prune stale
*.backup.gz artefacts, and the README's documented rollback command
covers both the compressed and (fallback) uncompressed cases.
Verified locally (not yet on real hardware): streaming path produces
no uncompressed intermediate, the gzip-unavailable fallback still
produces a plain backup, and the documented gunzip+chmod rollback
restores a byte-identical, executable binary.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
go install github.com/golangci/golangci-lint/cmd/golangci-lint@latest
silently resolves to the latest v1.x release (v1.64.8) -- Go's semantic
import versioning treats v2+ as a completely separate module path
(.../v2/cmd/golangci-lint), so the unsuffixed path's @latest can never
see v2 releases. That mismatched v1 binary can't even load this
repo's v2-format .golangci.yml, and separately doesn't understand the
go1.27.0 toolchain declared in go.mod.
Fix the install hint in `make lint`'s not-found message to use the /v2
path, and refresh the now-current version noted in .golangci.yml's
header comment (installed locally as v2.13.1, built with go1.27.0).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Go 1.27 changed how runtime.FuncForPC reports the symbol for
HandleWeb()'s returned closure: it now correctly attributes it to its
defining function (handlers.(*Server).HandleWeb) instead of leaking the
inlining call site's enclosing function name (setupRouter) the way
older Go versions did. The registered route itself is unchanged -- this
is purely a difference in the introspected debug name.
The test's cleanup logic had a dedicated special case for stripping a
leading "setupRouter" prefix, added to work around exactly that
inlining artifact. Verified empirically (temporarily instrumented with
the raw runtime.FuncForPC output, then diffed the full 299-route table
with the special case removed) that the general prefix-stripping loop
already produces an identical result for the remaining legitimate
cases (closures actually defined inline in setupRouter, e.g.
/favicon.ico) -- so the dedicated case was already redundant before
this Go bump and can be dropped.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
syncSources never reported how many sources it actually saved, so the
Admin UI's success message always said the meaningless "sources:
synced" regardless of outcome. syncSources now returns the count saved
(-1 if the fetch failed), threaded through SyncResult.SourcesCount.
Also replaces the single run-on results string (which visually mashed
presets/recents/sources together with no separator) with a real <ul>
list, one <li> per resource, matching the presets/recents diff lines.
Built via DOM APIs rather than innerHTML string concatenation, since
preset/recent names ultimately come from user-editable station names
on the speaker.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
startSync() used to POST once and, on any 2xx, render a hardcoded
"Presets: OK / Recents: OK / Sources: OK" regardless of what the
response actually said -- exactly why a silent partial data loss (see
the previous commit) would have looked like success to the user.
Now: on a 409 (destructive) response, build a specific confirm message
from the diff (e.g. "presets: 6 -> 5: Ici Roussillon") and gate via
window.confirm(), matching the existing QuickFix confirm UX; on
confirm, retry with ?confirmed=true. On success, render the actual
per-resource counts from the response body instead of a canned string.
Adds an HTTP-level regression test
(TestHandleInitialSync_DestructiveSyncReturns409ThenAppliesWhenConfirmed)
covering the same refuse-then-confirm flow through the real handler and
router, complementing the lower-level setup package test.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SyncDeviceData's syncPresets/syncRecents unconditionally overwrote the
datastore with whatever the speaker's live :8090 API returned at that
instant, with no check against what's already stored. If the speaker's
own local cache was stale or incomplete at that moment (e.g. right
after a burst of preset writes, or shortly after a reboot before the
speaker resyncs with Marge), Sync would silently persist that bad
snapshot over good data. A reporter's fresh #614 repro showed the
account's /full response dropping from 6 to 5 presets right after a
Sync click, consistent with this mechanism.
SyncDeviceData now diffs a fresh live fetch against what's stored
before writing anything; if applying would shrink either list, it
returns the diff (via the new SyncResourceDiff/SyncResult types)
without writing unless the caller passes confirmed=true.
HandleInitialSync surfaces this as a 409 with the diff JSON; every call
(confirmed or not) re-fetches live from the speaker, so a confirmed
retry re-checks reality rather than replaying a stale snapshot. Sources
sync is left unconditional, as before -- lower risk in practice and
out of scope for this fix.
fetchLivePresets/fetchLiveRecents are extracted pure-fetch helpers;
syncPresets/syncRecents keep their unconditional-apply behavior (used
directly by existing tests) since the button-driven path now goes
through the diff/confirm guard instead.
Adds TestSyncDeviceData_DestructiveSyncRequiresConfirmation covering
both the refusal and the confirmed-retry path.
Frontend wiring (script.js's startSync + real per-resource result
rendering, replacing the current hardcoded "OK" text) is a follow-up
commit on this branch.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Converts the remaining GetX-then-SaveX call sites (UpdatePreset,
RemovePreset, AddRecent's recent + learned-source persistence, AddSource)
to the new datastore.Mutate{Presets,Recents,ConfiguredSources} helpers,
closing the lost-update race for good on the actual write path the
speaker hits on every preset/recent store.
Adds a regression test that fires 6 concurrent UpdatePreset calls (same
shape as #614's rapid-fire repro) and asserts none are lost. Verified it
reliably fails against the pre-fix code (consistently drops presets
across repeated runs) and passes reliably with the fix, including under
-race.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
GetX-then-SaveX call sites did an unguarded read-modify-write: two
concurrent callers could each read the same starting list, mutate
different entries, and the second writer's Save clobber the first's
update. This is exactly what dropped a preset during #614's rapid-fire
preset-programming repro (overlapping PUT .../preset/N requests).
Add MutatePresets/MutateRecents/MutateConfiguredSources, each holding a
single write lock across the whole read-mutate-write cycle, and switch
resolvePresetSource's auto-add-canonical-source path (the same race,
for sources) to use the new MutateConfiguredSources.
Part of the #614 follow-up; more call sites (UpdatePreset's own preset
write, recents, other sources writers) still need converting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps golang from 1.26.6-alpine to 1.27.0-alpine.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Speakers paired via non-AfterTouch tooling (e.g. the USB-stick SSH-enable
method) can report a margeAccountUUID that isn't Bose's own 7-digit
numeric format, such as "stick@local". Discovery persisted this value
unvalidated, and the datastore's identifier check rejected it outright,
so the device was silently never saved.
Widens datastore.IsSafeIdentifier to accept any identifier that's safe
as a path component, XML value, and telnet-command token (still
excluding whitespace, control characters, and HTML/XML/shell
metacharacters), and makes it the single account-ID validator,
replacing setup's separate, stricter 7-digit-only IsValidAccountID.
Also closes related gaps found while widening the validator:
- postSetMargeAccount now XML-escapes the account ID instead of raw
string interpolation.
- SaveAccountInfo/HandleMargeCreateAccount now validate the account ID
the same way SaveDeviceInfo already did.
- handlers_export.go URL-escapes account/device IDs before building
outbound diagnostic-fetch URLs.
- pkg/service/health gained the sanitizeLog helper every other package
already has, applied to log lines carrying speaker-reported values.
- The admin web UI (script.js) renders account/device IDs via DOM APIs
instead of innerHTML/inline event-handler string interpolation,
closing a stored-XSS path, and a duplicate escape helper was
consolidated into one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
readPresetsLocked's os.IsNotExist branch and GetRecents' equivalent
branch silently returned an empty result with no log line at all,
unlike their sibling 0-byte/malformed-XML branches which already log.
When a reporter's speaker got served an empty preset list at reboot
despite an intact on-disk Presets.xml, there was no durable record of
it anywhere except a live capture at the exact moment.
Also log the per-device preset count going into every /full response
in CreateAccountDevice, distinguishing a disk read that came back
empty from one where source-mapping silently dropped presets
afterward.
Diagnostic only, no behavior change - the actual trigger for the
empty response is still open.
Release notes previously pointed at the flat, alphabetical Assets
list, forcing readers to hunt for their platform's soundtouch-service
or soundtouch-cli build. Generate direct per-platform links (with
inline checksum links, one row per OS/arch) from the deterministic
asset naming convention, and wire it into both release paths: the
auto-generated notes (create_release) and the hand-authored notes a
maintainer publishes via the GitHub web UI (update_release, which now
replaces the Downloads footer line in place). The footer-replace logic
always goes through the same strip-then-append path so re-running the
job for the same tag stays byte-for-byte idempotent.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A speaker can be reachable, named, and already account-paired yet still
report SOUNDTOUCH_NOT_CONFIGURED, leaving the "install the Bose app"
prompt on screen (reported for ST30 Series II/III in #615). Only a full
pass through the WebSocket setup state machine clears it, but running
that unconditionally risks re-running the bracket on speakers that
don't need or support it.
Add Manager.PreflightInitPlan: checks /supportedURLs for
/setMargeAccount, then requires /soundTouchConfigurationStatus to read
exactly SOUNDTOUCH_NOT_CONFIGURED before ExecuteInitPlan runs.
Already-configured devices are a no-op; an unsupported route or an
unrecognised status value aborts instead of guessing.
The default Suggested Plan (both XML-over-SSH and Telnet) migrates the
speaker over plain HTTP and never touches CA/TLS at all, but the CA/TLS
precondition always showed a red not-installed marker and the HTTPS
Connection Test panel was always rendered, regardless of whether the
current Target URL actually needs HTTPS. Both read as mandatory steps
even when nothing needed doing.
CA/TLS and HTTPS only matter when the Target URL is https:// or the
Customize form's DNS-interception method is chosen (that one always
targets https://*.bose.com).
- caVerdict() now takes whether the Target URL is HTTPS: shows a
neutral marker with a "not needed" note for HTTP targets, keeps the
red marker with a sharper "required" note for HTTPS targets.
- The HTTPS Connection Test panel gets a small note under its heading
("Optional for your current plan (HTTP)" / "Required ... (HTTPS)"),
computed from the same check. Stays visible either way so someone can
still run it if they want.
Frontend-only — showSummary already had the Target URL in scope.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Follow-up on #621: the Reboot Speaker button (plus Revert to Defaults,
Enable SSH, Disable SSH) was reachable only after expanding the
collapsed "Customize this migration" section and scrolling past three
fieldsets and the XML/telnet diff panes. Meanwhile every other real
action elsewhere in the admin UI (Save Settings, Apply Suggested Plan,
Start Sync, ...) is visible by default.
- Move Revert to Defaults and Reboot Speaker into an always-visible
"Speaker controls" row directly under the Migration State card.
- Move Enable/Disable SSH into the Preconditions table, inline with the
SSH (remote_services) status row, sized like the existing "Trust CA
Now" button next to the CA/TLS row. script.js now only rewrites the
inner status span on re-render (matching the CA/TLS pattern) so the
buttons survive summary refreshes.
- Add shared .btn-primary/.btn-danger CSS classes so button color
consistently means the same thing everywhere (primary = confirm,
danger = destructive) instead of ad-hoc inline colors; applied to
Save Settings, Apply Suggested/Custom Plan, Enable/Disable SSH,
Revert to Defaults, and Trust CA Now. Removed decorative gray from
Reboot Speaker and the connection/DNS test buttons.
- Replace the "Cancel" button (which only hid the whole summary panel,
not any of the actions it sat beside) with a "✕ Hide" control next
to the "Migration Summary for <device>" heading, alongside a new
"↻ Reload" shortcut for refreshSummary().
- Remove the now-unneeded force-open-the-details hack in migrate()
since Reboot no longer lives inside any collapsed container.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two doc notes from dunha's #621 follow-up: the factory-reset button
combo is confirmed identical on the SoundTouch 30 Series III, and
checking the reported version right after an on-device update can
still show stale info until the speaker (or an open Admin UI tab) is
rebooted, even though the new binary is already running.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- setup: resync all four boseurls (not just marge/swUpdate) over telnet
after an SSH-XML migration. `envswitch boseurls set` persists whatever
is currently in the runtime layer, so leaving stats/bmx untouched froze
their stale pre-migration values into the persistence layer permanently
-- surviving reboot and previously requiring a factory reset to clear.
- admin-ui: Migrate tab's Target Domain edits now propagate into the four
service URL fields (tracked via a dataset.autofilled flag so real manual
edits still aren't clobbered), closing the gap where changing Target
Domain to a new value left the four fields pointed at a stale default.
- install.sh: prune stale binary backups before the download too, not
only after a successful install, so a backup left by a previously
aborted (out-of-space) run gets cleaned up instead of compounding.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
validateURL() unconditionally rejected the hostnames "localhost" and
"127.0.0.1" for the four Migrate-tab plan URL fields, with no awareness
of deployment mode. Since the Suggested Plan's URLs are derived from the
page's own configured Target URL, a fresh on-device install (whose
server_url is now correctly http://localhost:8000, since #546) loaded
the Migrate tab with "Apply Suggested Plan" and "Pre-flight" disabled
by default, before the user touched anything -- directly contradicting
the on-device docs' "Migrate -> accept the suggested plan -> apply"
instructions.
Found while investigating why a #614 reporter used the non-standard
"localhost.localdomain" as a workaround, and why a #621 reporter got
stuck with "Migration Status: Migrated (URL mismatch)" trying to follow
the (correct) on-device localhost guidance.
Fix: a loopback URL is only flagged when it doesn't match the plan's
own Target URL origin. A field that's exactly what the service itself
is already configured to answer as (the on-device case) is accepted;
a stray "localhost" typed into one field while Target URL is a real LAN
address (the external-host mistake the check exists to catch) is still
flagged, since the origins differ.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Confirmed via code review: the Settings-save handler only updates the
service's own serverURL/settings.json, never contacts a device, and
neither migration method (telnet or XML/SSH) leaves anything behind that
would make a speaker later re-fetch a new address on its own. Both write
once, at migrate time.
Adds a Troubleshooting entry for this, and a cross-reference from the
Migration Guide's Step 2 (Target Domain) pointing at it, plus a step-
number fix (Migrate is Step 5, not Step 4).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
On an on-device install, soundtouch-service defaulted its server URL to
os.Hostname() when --server-url wasn't set. Since the service runs on the
speaker's own Linux, that returns the speaker's internal variant codename
(e.g. "spotty", "mojo") -- never resolvable, not even by the speaker itself
-- breaking TuneIn/BMX playback with CURL ErrorCode 6 (issue #546).
Add a --deployment-mode/DEPLOYMENT_MODE flag (on-device, private-network,
public-network) so the fallback is chosen deliberately instead of guessed:
on-device defaults to localhost, public-network refuses to start rather
than guess a public address, and the previous hostname-guessing behavior
is kept for private-network/unset installs, now with a startup warning.
The on-device init script sets DEPLOYMENT_MODE=on-device automatically and
now auto-exports aftertouch.conf into the daemon's environment generally,
which also unblocks discussion #610 (setting MGMT_USERNAME/MGMT_PASSWORD
on-device) without any further code change.
Verified end-to-end on real ST20 hardware: service now resolves
http://localhost:8000, a re-migrate updates the speaker's own runtime
config to match, and TuneIn playback works again.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The site sets disablePathToLower, so published URLs keep the source
filename's case, but the README link was lowercased and 404'd.
The walkthrough link was wrong in a second way: it used ../../reference/
with no extension, while cross-document links from guides/ resolve as
../reference/NAME.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
On-device installs were only reachable through an SSH tunnel, and the
docs blamed it on the service binding loopback-only. That was wrong.
Some SoundTouch chassis carry a BCO ("SMSC") Wi-Fi/Bluetooth
co-processor, and inbound LAN traffic reaches the main Linux SoC only
for a fixed set of Bose's own service ports, a list that appears to be
compiled into the co-processor firmware. AfterTouch's :8000 was never
part of that design, so connections never arrive at the SoC at all.
Confirmed on an ST20: a port sweep from a LAN client showed Bose's
:82/:8080/:8090/:8091/:8200/:17000 all answering while :8000 failed,
and tcpdump on the speaker's own eth0 recorded zero packets for it.
Ruled out along the way: iptables (empty), nft/ebtables (absent), the
router, Wi-Fi isolation, and the binding itself (0.0.0.0 is correct).
The init script now redirects one of the relayed ports to AfterTouch,
so http://<speaker-ip>:17008 works with no tunnel. 17008 is Bose's
software-update listener, whose cloud no longer exists. Only external
traffic is matched, so anything on the speaker still reaches :8000 as
before. Auto-enabled only where has-bco reports the co-processor, and
configurable via AFTERTOUCH_LAN_PORT (auto/none/port) in
aftertouch.conf. The rule is re-applied on every start and removed on
stop and uninstall, so it needs no watchdog; unlike prior art it is not
pinned to the LAN IP, so it also survives DHCP changes.
Credit for the REDIRECT technique goes to the STR / SoundTouch Reborn
project, which documented and shipped it first.
Also de-hardcodes the service port, which was baked independently into
the daemon args, the readiness poll and status, and makes install.sh
print the speaker's real address instead of a <your-device-ip>
placeholder it never filled in.
Adds a model support matrix, since the repo had no per-model
compatibility record and this behaviour is entirely chassis-dependent.
Only the verified ST20 row is filled in; everything else is marked
unknown rather than inferred.
Verified on hardware: auto-detection, idempotency across restarts,
teardown and restore, persistence across a full reboot, and LAN access
returning the service's health JSON.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The SSH connection-reuse fix (a4c0539) landed after this entry was
originally written describing the bug as open. Update the entry to
reflect the fix, confirmed on the same real hardware that surfaced
the original failure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three stacked bugs, found and confirmed on real hardware while
downgrading a speaker: the new binary landed on disk correctly, but
the running service kept reporting the old version indefinitely.
- install.sh called `/etc/init.d/aftertouch start`, not `restart`,
after installing. start-stop-daemon silently refuses to launch a
second instance when one is already running, and the init script
never checked its exit status, so the old process was never
replaced.
- The init script started the daemon through a `sh -c "exec ... |
logger"` pipeline, on the assumption that `exec` lets --make-pidfile
record the daemon's own PID. POSIX forks each side of a pipe into
its own process, so the wrapper shell (not the daemon) was the one
actually tracked. `stop` killed the wrapper, which doesn't forward
SIGTERM to its children, orphaning the real daemon to keep running
and keep holding :8000 forever.
- Once the wrapper correctly tracked the daemon's own PID, a further
race surfaced: start-stop-daemon's own "already running?" check
matched on generic `/bin/sh` identity, so a `restart`'s `start`
phase could catch the previous wrapper still mid-teardown and
silently refuse to launch a new one (masked by --quiet, looking
like a 120s hang).
Fixed by calling `restart` instead of `start` in install.sh, and by
having the wrapper shell record the daemon's real PID itself (via $!)
while keying start-stop-daemon's own check on that same pidfile
instead of process identity.
Verified on hardware: three consecutive restart cycles, each fast,
each with the pidfile matching the live daemon PID and daemon output
flowing through syslog again via logread.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Confirmed on real hardware: `VERSION=0.123.0 curl -sSL .../install.sh | sh`
silently does NOT pin the version, despite the docs claiming it "works
with pipe-to-sh". Shell variable-assignment prefixes only apply to the one
command they're attached to; in a pipe each command is its own process, so
the env var was set for `curl` (which never reads it) and never reached
`sh` (which does). A real attempt to pin v0.123.0 for a #614 pure
reproduction silently installed "latest" instead.
Verified the fix with a minimal repro (VERSION=X cat file | sh vs.
cat file | VERSION=X sh) before changing anything.
Moves the VERSION= prefix onto sh -- the last command in the pipe, the one
that actually reads it -- in ON-DEVICE-INSTALL-WALKTHROUGH.md (both
occurrences), scripts/on-device-install/README.md, and
scripts/on-device-install/install.sh's own header comment.
RASPBERRY-PI.md/EXTERNAL-HOST-WALKTHROUGH.md's `sudo VERSION=x ... bash
install.sh` pattern is unaffected -- that's a direct invocation, not a
pipe, so the env var already reaches the right process there.
Confirmed on real hardware (192.168.178.28): RevertMigration's full call
graph (revertXMLConfig/revertHosts/revertResolvConf/revertAftertouchHook/
removeRcLocalHooks/revertCACert) makes 17 separate client.Run() calls, and
pkg/ssh.Client.Run/UploadContent each dialed a brand-new SSH connection
per call with no reuse. Hitting a resource-constrained speaker with 17
rapid reconnects overwhelmed it -- confirmed via a follow-up plain SSH
command timing out at the TCP level, and the speaker going visibly
unresponsive.
Gives pkg/ssh.Client an opt-in persistent connection: Connect() dials
once and caches it, Close() releases it, and a shared dial() helper makes
Run/UploadContent reuse the cached connection when one's open, falling
back to today's per-call dial otherwise. RevertMigration now calls
Connect() once and defer Close(), collapsing 17 connections into 1. The
other ~21 m.NewSSH() call sites in pkg/service/setup never call Connect,
so their behavior is completely unchanged -- this only touches the one
function that was actually causing real-world problems.
SSHClient interface gained Connect()/Close(); both test mocks
(pkg/service/setup/setup_test.go, pkg/service/handlers/handlers_setup_test.go)
got no-op stubs. Added TestClose_NoOpWithoutConnect and
TestConnect_DialFailureLeavesConnNil in pkg/ssh/ssh_test.go -- these don't
prove connection reuse against a real server (Client.Run hardcodes :22,
no configurable port for a test listener), so that specific behavior is
verified by code review (a single `if c.conn != nil` branch) plus the
real-hardware confirmation above, not an automated integration test.
Also fixes the web UI's "Revert to Defaults" button, which calls the same
RevertMigration code path.
Prompted by recovering a real speaker (192.168.178.28) that had gone
stressed/unresponsive: it had previously been through `setup enable-ssh`
without --service-url (leaving margeServerUrl persisted as the
aftertouch.invalid placeholder, firmware retry-looping a failing DNS/curl
lookup against it, #546-shaped), compounded by a burst of SSH connections
from a `setup revert` attempt (see the dial-storm finding, tracked
separately, not fixed here).
Added --marge-url/--stats-url/--sw-update-url/--bmx-url override flags to
`setup migrate`. No new backend logic: telnetURLsFromOptions
(pkg/service/setup/telnet_migration.go) already supported per-field
overrides end-to-end, shared with the XML method's applyURLOverrides --
the CLI just never exposed it. Lets a speaker's URLs be pointed anywhere
(back to AfterTouch, or back to the genuine original Bose cloud) via a
single telnet connection, no SSH and no .original backup required --
confirmed recovering the real speaker above (migration committed, a
previously-timing-out plain SSH command returned instantly afterward).
Documented in TROUBLESHOOTING.md: the enable-ssh placeholder-persistence
gotcha (now with the escape hatch above) and the setup revert dial-storm
risk as a known, not-yet-fixed issue with a workaround (prefer this
lighter telnet-only migrate over repeated revert attempts). Documented the
new flags in CLI-REFERENCE.md's setup migrate section.
Prompted by writing a #614 self-test guide (on-device install walkthrough)
and by helping fully revert a real speaker a factory reset didn't fully
clean up.
New soundtouch-cli commands (cmd/soundtouch-cli/cmd_setup.go):
- `setup sync` — wraps POST /api/setup/sync/{deviceId}, the same operation
as the web UI's Devices -> Sync Data button. Read-only towards the
speaker (presets/recents/sources into the datastore); never writes back.
- `setup revert` — wraps setup.Manager.RevertMigration, the same operation
as the web UI's "Revert to Defaults" button. Restores
SoundTouchSdkPrivateCfg.xml/hosts/resolv.conf from their .original
backups and strips the AfterTouch CA cert from the trust bundle. No
--service-url needed; pure SSH against the speaker. Deliberately leaves
SSH persistence and account pairing untouched, matching the web UI
button (use `setup remote-services --remove` / `account unpair` for
those).
Both are thin wrappers with no new business logic, matching the existing
migrate/pair/reboot pattern. Tests added for setup sync's HTTP plumbing
(auth-retry, device-scoped URL, error propagation); no CLI-level test for
setup revert, consistent with reboot/migrate/pair also having none --
RevertMigration itself is already tested in pkg/service/setup/setup_test.go.
Documentation gaps closed:
- ON-DEVICE-INSTALL-WALKTHROUGH.md never showed the Migrate step at all --
jumped from install/reboot straight to the pairing QuickFix as if the
speaker were already pointed at itself. Added an explicit Migrate step
(web-UI and CLI paths), a CLI alternative for the pairing QuickFix, a
no-USB-stick `enable-ssh` (#471) alternative to the physical stick
procedure, and a "testing a pre-release build" section for cross-
compiling and manually swapping an unreleased binary (soundtouch-cli
deploy step included, mirroring the already-covered soundtouch-service
swap).
- MIGRATION-GUIDE.md's "never use localhost" Target Domain warning had no
on-device exception, even though loopback is exactly correct there since
the speaker and the service are the same machine. Added the callout, and
the same enable-ssh alternative to its SSH-enablement step.
- DEVICE-INITIAL-SETUP.md's AP-mode Wi-Fi provisioning commands were
macOS-only (networksetup, dns-sd) with no Linux/Windows equivalents,
unlike the rest of the docs. Added nmcli/netsh wlan alongside.
- CLI-REFERENCE.md's entire `setup <subcommand>` group was undocumented
(--help was the only reference) -- wrote a full "Setup & Migration"
section covering all 16 subcommands, and added the also-undocumented
`account unpair` to the existing Music Service Account Management
section.
Repo-wide sweep of example version strings still pinned around 0.111.2/
0.111.3 (four releases behind) across install-script comments, README
walkthroughs, the FALLBACK_VERSION defaults in on-device-install and
raspberry-pi install scripts, and the bug-report issue template's version
placeholder. Bumped to 0.123.0, the current release.
Left untouched: RFC-5737 example IPs and Go test fixtures that happened to
match the same version-number pattern, dated blog posts, and the Hugo
theme's own unrelated version pin.
Adds a second QuickFix to the speaker_presets_count warning, reusing
the existing postSourcesUpdated fix (checks_refresh_sources.go). It
nudges the speaker to re-fetch /full, which is confirmed (both from
marge.AccountFullToXML and a genuine captured Bose-cloud response) to
carry presets alongside sources.
Whether firmware actually re-applies /full's preset section back onto
its own local table is unconfirmed — issue253_regression_test.go
already flags that exact link as untested. So this is offered as a
free, non-destructive thing to try first, with the guaranteed
restore_presets_to_speaker push as the fallback. Gives both directions
(pull-style nudge, direct push) rather than only the one.
Refs #614
When the speaker shows 0 preset slots while the service's Presets.xml
has entries (the #614 pattern), replays each stored preset onto the
speaker via :8090/storePreset (client.StorePreset), one slot at a
time. Doesn't require a reboot and doesn't need the content playing
first, unlike a physical preset-button save.
Sync only ever reads from the speaker; this is the missing write
direction, and lets a reporter try recovering presets without
re-entering all 6 by hand.
Refs #614
The speaker_presets_count check told users a power-cycle "usually
re-syncs" missing presets. #614 shows a power-cycle is itself one of
the two reported triggers for the speaker wiping its own presets, so
that advice was actively harmful for this failure mode.
Also fixes the comment's citation: it claimed this was a known pattern
from discussion #295 and #235, but neither actually discusses preset
loss (#295 is a cloud-hosting question, #235 a closed Spotify
preset-save bug). That reference was wrong from the original commit
(7d46ae2); #614 is the first confirmed instance.
Refs #614
Bumps the go directive to 1.26.6 across the main module and both
standalone example modules (preset-management, navigation-station-demo),
plus the builder image in Dockerfile and the three mock-service images
in docker-compose.ci.yml.
Also refreshes the examples' require github.com/gesellix/bose-soundtouch
pin from the stale v0.118.0 to the current v0.123.0 release tag (the
replace directive means they build against local source regardless,
but the pin should still track reality). go mod tidy run in all three
modules; no other dependency changes.
Answers #591's open question 2: CLI-only users get no update notice
from soundtouch-service's periodic background check. Both binaries
gain a soundtouch-cli/soundtouch-backup update-check command that
does a single, on-demand GitHub Releases check via the existing
pkg/service/updatecheck package. Running the command is itself the
opt-in, so unlike the service there's no config flag or persisted
state.
pkg/service/updatecheck.Checker was already designed decoupled from
handlers.Server/main.go specifically so other binaries could import
it directly; this is that follow-through.
The update-check interval field just got an info-toggle explaining Go
duration syntax; Discovery Interval takes the exact same syntax and
had no such help, which would read as inconsistent on the same
Settings page. Pre-existing gap, unrelated to #591 itself, but small
enough to fix alongside it while the pattern is fresh.
Reuses the existing info-toggle/info-details pattern (already used for
the HTTPS override, TLS extra hosts, and DNS upstream fields) rather
than inventing a new affordance, so users aren't left guessing at Go's
duration syntax when typing a custom interval.
