14 KiB
title, menu_order
| title | menu_order |
|---|---|
| Installing Weave Scope | 20 |
Weave Scope consists of three parts: the probe, the app and the user interface. Scope can be deployed in either a standalone configuration, where you run everything yourself, or by using Weave Cloud.
Weave Cloud is the recommended option if:
- You are deploying to larger clusters.
- You require secure remote access.
- You wish to share access with your coworkers.
The following topics are discussed:
- Installing Scope on Docker
- Installing Scope on Kubernetes
- Installing Scope on Amazon ECS
- Installing Scope on minimesos
- Installing Scope on Mesosphere DC/OS
To install Scope onto your local Docker machine in standalone mode, run the following commands:
sudo wget -O /usr/local/bin/scope https://git.io/scope
sudo chmod a+x /usr/local/bin/scope
scope launch
This script downloads and runs a recent Scope image from the Docker Hub. Scope needs to be installed onto every machine that you want to monitor. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
After it’s been launched, open your browser to http://localhost:4040.
Note: If you're using boot2docker, replace localhost with the output of boot2docker IP.
Scope allows anyone with access to the UI control over your containers: as such, the Scope app endpoint (port 4040) should not be made accessible on the Internet. Additionally traffic between the app and the probe is currently insecure and should also not traverse the Internet.
First, obtain a service-token from Weave Cloud by signing up at https://cloud.weave.works.
Then, install Scope onto your local Docker machine and start using Weave Cloud:
sudo wget -O /usr/local/bin/scope https://git.io/scope
sudo chmod a+x /usr/local/bin/scope
scope launch --service-token=<token>
Where,
--service-token=<token>is the token that you obtained when you signed up.
This script downloads and runs a recent Scope docker image from the Docker Hub. Scope needs to be installed onto every machine that you want to monitor. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
After Scope has been launched, open your web browser to https://cloud.weave.works and login. Click 'View Instance' in the top right-hand corner to see the Scope user interface.
If Scope is running on the same machine as the Weave Network, then the probe uses weaveDNS to automatically discover any other apps on the network. Scope does this by registering itself under the address scope.weave.local.
Each probe sends its reports to every app registered at this address. If you have weaveDNS set up and running, no further steps are required.
If you don’t want to use weaveDNS, then Scope can be instructed to cluster with other Scope instances on the command line. Hostnames and IP addresses are acceptable, both with and without ports, for example:
# scope launch scope1:4030 192.168.0.12 192.168.0.11:4030
Hostnames will be regularly resolved as A records, and each answer used as a target.
To install Scope on your local Docker machine in Standalone Mode using Docker Compose, run the following commands using one of the two fragments below.
docker-compose up -d
Scope needs to be installed onto every machine that you want to monitor. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
After it’s been launched, open your browser to http://localhost:4040.
Docker Compose Format Version 1:
probe:
image: weaveworks/scope:0.15
net: "host"
pid: "host"
privileged: true
labels:
- "works.weave.role=system"
volumes:
- "/var/run/docker.sock:/var/run/docker.sock:rw"
command:
- "--probe.docker"
- "true"
Docker Compose Format Version 2:
version: '2'
services:
probe:
image: weaveworks/scope:0.15
network_mode: "host"
pid: "host"
privileged: true
labels:
- "works.weave.role=system"
volumes:
- "/var/run/docker.sock:/var/run/docker.sock:rw"
command:
- "--probe.docker"
- "true"
Version 2 of this YAML file supports networks and volumes as defined by any plugins you might be using. See Compose File Reference for more information.
###Using Docker Compose with Weave Cloud
First, obtain a service-token from Weave Cloud by signing up at https://cloud.weave.works.
To install Scope on your local Docker machine with Weave Cloud and use Docker Compose, run the following commands, using one of the two fragments below.
SCOPE_SERVICE_TOKEN=<token> docker-compose up -d
Where,
SCOPE_SERVICE_TOKEN=<token>is the token that you obtained when you signed up.
Scope needs to be installed onto every machine that you want to monitor. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
After it’s been launched, open your web browser to https://cloud.weave.works and login. Click 'View Instance' in the top right-hand corner to see the Scope user interface.
Docker Compose Format Version 1:
probe:
image: weaveworks/scope:0.15
net: "host"
pid: "host"
privileged: true
labels:
- "works.weave.role=system"
volumes:
- "/var/run/docker.sock:/var/run/docker.sock:rw"
command:
- "--probe.docker"
- "true"
- "--service-token"
- "${SCOPE_SERVICE_TOKEN}"
Docker Compose Format Version 2:
version: '2'
services:
probe:
image: weaveworks/scope:0.15
network_mode: "host"
pid: "host"
privileged: true
labels:
- "works.weave.role=system"
volumes:
- "/var/run/docker.sock:/var/run/docker.sock:rw"
command:
- "--probe.docker"
- "true"
- "--service-token"
- "${SCOPE_SERVICE_TOKEN}"
Version 2 of this YAML file supports networks and volumes as defined by any plugins you might be using. See Compose File Reference for more information.
After Scope has been launched, open your web browser to https://cloud.weave.works and login. Click 'View Instance' in the top right-hand corner to see the Scope user interface.
##Installing Scope on Kubernetes
To install Scope onto a Kubernetes cluster in Standalone Mode, follow these instructions.
Before You Begin
-
Ensure that the cluster allows privileged pods - this is required by the Scope probes. By default, privileged pods are allowed from Kubernetes 1.1 and up. If you are running an earlier version or a non-default configuration, ensure that your API Server and all of your Kubelets are launched with the flag
--allow_privileged. -
The version of kubectl must match the cluster version that you are using.
-
The cluster must support DaemonSets. DaemonSets are necessary to ensure that each Kubernetes node can run a Scope Probe.
To enable DaemonSets in an existing cluster, add the --runtime-config=extensions/v1beta1/daemonsets=true argument to the apiserver's configuration. This is normally found in the /etc/kubernetes/manifest/kube-apiserver.manifestfile after a restart of the apiserver and controller manager has occurred. If you are creating a new cluster, set KUBE_ENABLE_DAEMONSETS=true in your cluster configuration.
Note: Prior to Kubernetes version 1.2 DaemonSets would fail to schedule pods on unschedulable nodes (typically the master). This will result in the probe not running on that node. See #1030 for more information. It is advised that you use Kubernetes version 1.2 or higher.
Install Scope on Your Cluster
You can run Scope natively in your Kubernetes cluster using kubectl with a launch URL as show below.
The simplest way to get the latest release of Scope deployed onto a Kubernetes cluster is by running the following:
kubectl create -f 'https://cloud.weave.works/launch/k8s/weavescope.yaml' --validate=false
This runs a recent Scope image from the Docker Hub and launches a probe onto every node as well as a single app. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
Allowable parameters for the launcher URL:
v- Weave Scope version or tag, e.g.latestcurrent release is the defaultk8s-service-type- Kubernetes service type (for running Scope in Standalone mode), can be eitherLoadBalancerorNodePort, by default this is unspecified (only internal access)
**Note:**The
--validate=falseflag is currently required due to a bug in Kubernetes (see kubernetes/kubernetes#24089 for more details
To download and read the Scope manifest run:
curl --silent --remote-name https://cloud.weave.works/launch/k8s/weavescope.yaml
Open Scope in Your Browser
kubectl port-forward $(kubectl get pod --selector=weavescope-component=weavescope-app -o jsonpath={.items..metadata.name}) 4040
Open http://localhost:4040 in your browser. This allows you to access the Scope UI securely, without opening it to the Internet.
Before You Begin
-
All the prerequisites from above apply.
-
Obtain a service-token from Weave Cloud by signing up at https://cloud.weave.works.
Install Scope on Your Cluster
To get the latest release of Scope deployed onto a Kubernetes cluster, run the following:
kubectl create -f 'https://cloud.weave.works/launch/k8s/weavescope.yaml?servie-token=<token>' --validate=false
Where,
service-token=<token>is the token that you obtained when you signed up with Weave Cloud.
**Note:**The
--validate=falseflag is currently required due to a bug in Kubernetes (see kubernetes/kubernetes#24089 for details.
This runs a recent Scope image from the Docker Hub and launches a probe onto every node, pointing them at Weave Cloud. Once launched, Scope doesn’t require any other configuration and it also doesn’t depend on Weave Net.
Open Scope in Your Browser
After Scope has been launched, open your web browser to https://cloud.weave.works and login. Click 'View Instance' in the top right-hand corner to see the Scope user interface.
##Installing Scope on Amazon ECS
There are currently three options for launching Weave Scope in ECS:
- A CloudFormation template to launch and easily evaluate Scope directly from your browser.
- An Amazon Machine Image (AMI) for each ECS region.
- A simple way to tailor the AMIs to your needs.
The AWS CloudFormation template is the easiest way to get started with Weave Net and Weave Scope. CloudFormation templates provide developers and systems administrators a simple way to create a collection or a stack of related AWS resources, and it provisions and updates them in an orderly and predictable fashion.
Use this specially created Weaveworks CloudFormation template to create an EC2 instance with all of the resources you need, including Weave Net and Weave Scope.
Before launching the stack:
- Set up an Amazon Account
- Create the Key Pairs. You will need to reference the name of the key pairs when you create the stack.
The link below will launch a sample app using a Cloudformation template, but you can swap out the IdentiOrca app and use your own app instead.
Ready to launch a stack? Click here to launch a stack to AWS:
For step by step instructions on how to configure the stack, see: Install Weave to AWS with One-Click
##Installing Scope on minimesos
The minimesos project enables you to run an Apache Mesos cluster on a single machine, which makes it very easy to develop Mesos frameworks.
By default, Weave Scope is included in the minimesos cluster, and can be accessed at http://172.17.0.1:4040/.
If Weave Scope is removed from your minimesos cluster, you can add it back with the following command:
minimesos install --marathonFile https://raw.githubusercontent.com/weaveworks/scope/master/examples/mesos/minimesos.json
##Installing Scope as a DC/OS Package
Scope can be installed as a DC/OS Package through the open Universe.
DC/OS is short for Datacenter Operating System, a distributed operating system using Apache Mesos as its kernel. The easiest way to get start with DC/OS in the public-cloud is to deploy it on Amazon Web Services (AWS).
For more information see, Deploying Weave Scope on DC/OS
See Also