Adds an SSH-free third migration path that drives the SoundTouch device's
diagnostic shell on TCP port 17000, plus a hardened replacement for the
fragile /setMargeAccount HTTP pairing call.
* `pkg/telnet` — new reusable, dependency-free client (sibling of `pkg/ssh`)
with deadline-driven Dial / Probe / SendCommand / Close. Mock-server tests
cover happy path, command-not-found, mid-stream close, and the wedged-device
read-timeout scenario.
* `setup.MigrationMethodTelnet` — runs `sys configuration` for all four URLs
plus the parallel `envswitch boseurls set` persistence layer that otherwise
wins on reboot, then verifies with `getpdo CurrentSystemConfiguration`.
Aborts on the first non-OK response so configuration is never half-written.
No SSH backup or rw pre-flight (the path is SSH-free by design).
* `setup.PairAccount` — probes :8090/supportedURLs first, time-bounds
POST /setMargeAccount aggressively (5s connect / 12s total) to avoid the
hangs reported in #236, and falls back to `envswitch accountid set <id>`
over telnet when the HTTP endpoint is missing or wedged. Returns a
PairAccountResult breadcrumb so the UI can show which path actually
succeeded.
* `setup.Reboot(deviceIP, method)` — gains a RebootMethod selector;
RebootMethodSSH stays the default (preserving prior behavior),
RebootMethodTelnet sends `sys reboot` over a fresh telnet session and
treats the inevitable socket-close as success.
* New endpoints on `/setup`:
- GET /account-id-suggestions/{deviceId} — returns the device's current
margeAccountUUID (from :8090/info) plus known account IDs from the
datastore, so the UI can offer reuse.
- POST /pair-account/{deviceId}?account_id=NNNNNNN — invokes PairAccount;
the existing reboot endpoint reads ?method=ssh|telnet from the query
string.
* Helpers `IsValidAccountID` (exactly 7 digits) and `GenerateAccountID`
(crypto/rand, retries on collision against a known-IDs list).
Documentation in docs/analysis/TELNET-MIGRATION-METHOD.md is updated to match
the implementation: bare-URL convention for `soundtouch-service`, no automatic
`sys reboot` (user-initiated via the existing button with a method selector),
and the realised package layout. The /etc/hosts method is intentionally not
exposed in the new flow.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The OverrideSdkPrivateCfg.xml override path introduced in #209 does not
work on SoundTouch 10 (and likely other models): the firmware ignores
the override file, leaving the device pointing at the original Bose
cloud URLs. Revert to editing SoundTouchSdkPrivateCfg.xml directly with
a .original backup, which is the approach known to work.
Relates to #214
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
client.Run uses CombinedOutput, so when
`/mnt/nv/OverrideSdkPrivateCfg.xml` is absent (the default for devices
migrated with pre-0.71.0 code) the cat stderr is returned as the
override config and surfaced to the migration page UI as "Current Config
(on Speaker)". Gate the branch on `[ -f ... ]` first, mirroring the
legacy .original check.
Relates to #209
Relates to #214
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Use /mnt/nv/OverrideSdkPrivateCfg.xml (the firmware's override path)
rather than editing /opt/Bose/etc/SoundTouchSdkPrivateCfg.xml directly.
A malformed override cannot cause a reboot loop because the device falls
back to the untouched original.
Revert now removes the override file; legacy .original backups are still
restored for devices migrated with older code. checkCurrentConfig reads
the override path first so IsMigrated detection works correctly with the
new approach.
Credit: Ueberbose team, discovered via [soundcork
documentation](https://github.com/deborahgu/soundcork#configuring-the-bose-speaker-to-use-the-soundcork-server).
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
- resolveIP now returns (string, error): error when result did not come
from the device's own SSH ping (service-side fallback or total
failure)
- migrateViaResolvConf and parseTargetURLAndResolveIP abort on error,
preventing a bad IP from being written to the device
- GetMigrationSummary captures the error in ResolveIPError and falls
back
to the hostname for the preview display; XML migration is unaffected
- Web UI shows a warning box with the error and a docs link when
resolution
is uncertain; migrate button stays enabled for the XML method
- Add hostname resolution troubleshooting section to TROUBLESHOOTING.md
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
- Rename proxy option values: 'upstream' → 'proxied', 'official' →
'original'
- Add 'original' option to preserve current device URL as-is per field
- Drop proxyURL guard in applyProxyOptions so 'original' works without a
proxy
- Abort migration if on-device backup cannot be created (was
warning-only)
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Registers HandleAlexaCertificate on POST /alexa/certificate. The handler
logs the device MAC from the request body and returns 501 Not
Implemented with a JSON error explaining that AWS IoT integration is
required to provision Alexa device certificates.
Adds voice.api.bose.io to both /etc/hosts domain lists in setup.go (DNS
intercept was already covered by the bose.io wildcard entry in dns.go).
Relates to https://github.com/gesellix/Bose-SoundTouch/discussions/84
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Endpoints:
- POST /streaming/music/musicprovider/{id}/trial/is_eligible (reuses
is_eligible handler)
- POST /bmx/tunein/v1/favorite/{stationID} with datastore persistence
(SaveTuneInFavorite)
- DELETE /bmx/tunein/v1/favorite/{stationID} (DeleteTuneInFavorite)
- POST /bmx/core02/svc-bmx-adapter-orion/prod/orion/token (anonymous
Orion token)
- GET /bmx-icons/* serving embedded static/media assets (media.bose.io)
- GET /ced/* serving embedded firmware index, release notes, and 10
app-help XMLs (downloads.bose.com)
Add media.bose.io and downloads.bose.com to DNS redirect lists (setup.go
both domain slices, dns.go shouldIntercept list, main.go getDomains
map). Document implemented endpoints in
tests/interactions_20260502_missing_external.md; mark rows 0246–0247 as
self/☑ in the interactions table.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces a standalone `soundtouch-backup` CLI with three subcommands:
- `all`: authenticates with the Bose cloud, backs up account data, then
reads device IPs from devices.xml and backs up each reachable speaker
- `cloud`: fetches account profile, devices, sources, presets, and full
endpoint from streaming.bose.com
- `local`: backs up each speaker via HTTP API (12 endpoints) and
optionally via SSH (individual files + /opt/Bose/etc/ and
/mnt/nv/BoseApp-Persistence/1/ directories)
Also centralises pkg/service/ssh → pkg/ssh so both the service and the
backup tool share the same SSH client; adds ReadFile and ReadDir
methods, and handles the firmware quirk where cat exits 1 on empty
files.
Output is a single dated .tar.gz or .zip archive.
Example flow:
```shell
gesellix@Mac Bose-SoundTouch % go run ./cmd/soundtouch-backup all --output _/cloud-backup --email user@example.com
Password:
Authenticating as user@example.com...
✓ Authenticated (account ID: 1234567)
✓ email address (107 bytes)
✓ devices (1492 bytes)
✓ sources (1111 bytes)
✓ presets (2585 bytes)
✓ full account (55037 bytes)
Found 2 device(s) in cloud account, attempting local backup...
✓ ST20: 12 files via HTTP
⚠ ST20: SSH skipped /etc/remote_services (Process exited with status 1)
⚠ ST20: SSH empty file /mnt/nv/remote_services
✓ ST20: 64 files via SSH
✓ ST10: 12 files via HTTP
⚠ ST10: SSH empty file /etc/remote_services
⚠ ST10: SSH skipped /mnt/nv/remote_services (Process exited with status 1)
✓ ST10: 48 files via SSH
Archive written: _/cloud-backup/soundtouch-backup-2026-05-02.tar.gz (141 files)
```
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Added 'Skip Mirror Endpoints' setting to allow specific requests like
`/oauth/device/*/music/musicprovider/15/token/cs3` to be handled
exclusively locally, even when mirroring is enabled. Updated
MirrorMiddleware to check against the skip list before performing
mirroring or parity logic. Exposed the setting via the Web UI Settings
tab and the CLI. Updated relevant tests to accommodate the configuration
changes.
Co-authored-by: Junie <junie@jetbrains.com>
- Enhance initial and full data synchronization to better align with
upstream services.
- Update data structures in 'pkg/models' to support missing fields
(e.g., SecretType for Spotify).
- Improve 'datastore' persistence logic for presets, recents, and
sources.
- Add comprehensive regression tests for sync and datastore operations.
- Update documentation on parity status and improvements.
Co-authored-by: Junie <junie@jetbrains.com>
Co-authored-by: Junie <junie@jetbrains.com>
- Replace serial number-based directory structure with deviceId from device /info
- Extract migration logic to handle transition from old to new directory structure
- Fix directory resolution bug that prevented proper migration to deviceId-based paths
- Ensure all device data (Presets.xml, Sources.xml, Recents.xml) preserved during transition
- Add configurable migration with --migration-enabled and --migration-dry-run flags
- Update DeviceInfo.xml to reflect authoritative deviceId from device's /info endpoint
- Directory structure now: /devices/{deviceId}/ instead of /devices/{serialNumber}/
This aligns the directory structure with the device's self-declared identity
and ensures data consistency with the device's /info endpoint.
Implements the ability to mirror local requests to the official Bose
Cloud in the background, allowing for real-time comparison and parity
analysis between the emulated service and the original backend.
Core Changes:
- Implement `MirrorMiddleware` for asynchronous and synchronous mirroring.
- Add `Parity Logger` to detect discrepancies in status, headers, and body.
- Implement storage for parity mismatches in `data/parity_mismatches/`.
- Add `Internal Paths` configuration to exclude management traffic from logs.
Web UI & API:
- Add "Parity & Mirroring" tab to the Web UI for discrepancy analysis.
- Integrated "Internal Paths" configuration in Settings.
- Add "mirror" category filter to the Interactions UI.
- Implement endpoints for listing and clearing parity mismatches.
Infrastructure & Tools:
- Extend `setup.Manager` with `HTTPGet` override for reliable testing.
- Add CLI flags `--mirror-enabled`, `--mirror-endpoints`, and `--internal-paths`.
- Update `datastore.Settings` to persist mirroring and internal path configurations.
Tests:
- Add `pkg/service/handlers/mirror_test.go` for middleware verification.
- Update `TestProxySettingsAPI` and `TestRecordMiddleware` for new settings.
- Refactor `TestMigrationAndCA` to use mocked network calls (30x speedup).
This commit updates the mock SSH client in the handler tests to support the recently added verification steps. It now correctly handles stateful responses for /etc/hosts and properly responds to file existence and CA trust checks.
This update adds explicit verification checks after applying changes via XML, Hosts, and ResolvConf migration methods. The service now verifies that configuration files are correctly updated on the device before considering the migration successful, preventing unreliable states.
This update allows the service to correctly patch both /etc/udhcpc.d/50default and /opt/Bose/udhcpc.script (used in SoundTouch 10 firmware) for DNS redirection. It also improves robustness by adding file existence checks in rc.local and ensures clean state by reverting to .original backups during migration.
- Added strict guardrails for RevertMigration: now fails if .original backup is missing.
- Revert now uses copy (cp) instead of move (mv) to preserve original backups on the device.
- Decoupled reboot from migration/revert processes, making it a manual operation.
- Added standalone Reboot API and manual 'Reboot Speaker' button in the Web UI.
- Separated 'Remove Remote Services' from the revert process to allow independent management.
- Implemented command output capture and display in the Web UI for all setup actions (Migrate, Revert, Trust CA, Backup, Reboot, Remove Remote Services).
- Updated doc.go with a modern overview of the library and SoundTouch service features.
- Fixed several tests to align with new method signatures and behavior changes.
- Renamed pkg/service/crypto to pkg/service/certmanager
- Updated package declaration from 'crypto' to 'certmanager'
- Fixed all import statements across the codebase
- Updated type references from *crypto.CertificateManager to *certmanager.CertificateManager
- Renamed files for consistency: crypto.go -> certmanager.go, crypto_test.go -> certmanager_test.go
- Resolves golangci-lint var-naming issue about conflicting with Go standard library package names
- All tests pass and linter reports 0 issues
Tobias GesellchenandClaude Opus 4.7
