Add `soundtouch-cli setup` subcommand group covering the full reset →
re-provision → pair lifecycle as a scriptable alternative to the web UI:
inspect, verify, plan, factory-reset, wait-ap, wifi-push, wait-online,
ssh-check, install-ca, migrate, reboot, pair (bare | full state machine)
Supporting library code lives in pkg/service/setup: factory_reset.go,
wifi_provision.go, inspect.go, init_plan.go, setup_session.go.
Confirmed against ST10 firmware 27.0.6 that bare setMargeAccount over
WebSocket — no SETUP_START/SETUP_ENTER/SETUP_LEAVE bracket — is
sufficient to pair a factory-reset speaker; the firmware materializes
SystemConfigurationDB.xml and Sources.xml itself and the pairing
survives reboot. Result and field-by-field SystemConfigurationDB
comparison documented in docs/analysis/SETUP-WEBSOCKET-EXPERIMENT.md.
Captures the device's pre-reset DELETE-to-marge plus its LAN peer
notification flow in docs/analysis/FACTORY-RESET-PROTOCOL.md.
Perf: batch GetMigrationSummary's SSH probes into one Run() call via
ssh_probe.go / ssh_probe_apply.go — was ~8 sequential dials at
500-1000 ms each on FW 27 crypto, now one round-trip. Same data shape,
same MigrationSummary fields populated.
Fixes /clockTime and /clockDisplay wire formats — firmware 27 rejects
the legacy flat XML ("Error parsing request"). ClockTimeRequest now
uses utcTime attribute; ClockDisplayRequest emits the nested
<clockConfig> envelope with timezoneInfo/timeFormat/brightnessLevel.
Removes cmd/example-init-speaker (superseded by setup pair).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
MIGRATION-GUIDE.md step 5 — replaces the "Telnet round-trip probe"
bullet with two honest variants: the new passive observer for
already-migrated speakers, and a skip-row explainer for not-yet-
migrated speakers pointing at the Apply + reboot cycle. The rollback
section drops the obsolete tangent about the probe step leaving
persisted URLs untouched (the probe no longer exists, and the wizard
already writes both layers).
TELNET-MIGRATION-METHOD.md — §9.4's pre-flight table swaps the
deprecated `POST /setup/telnet-probe` row for the new
`POST /setup/peer-probe` row plus a skip-explainer row for the
not-yet-migrated case. §9.5 gains a "REMOVED — see §9.8" header
pointer (the section is kept as historical record of what was
tried). §9.6's backend-additions table replaces the deleted
`probeRegistry` + `RunTelnetRoundTripProbe` + `/setup/telnet-probe`
row with the `peerObserver` + `RunPeerReachabilityProbe` +
`/setup/peer-probe` row that supersedes it.
NEXT.md is local-working-tree only (deliberately untracked) and
gains a ✅ Resolved header pointing at §9.8; not part of this
commit.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The swUpdate daemon caches its target URL at boot and ignores live
`sys configuration` writes, so the active flip in
RunTelnetRoundTripProbe never reaches the running daemon — confirmed
empirically on a fully-migrated speaker (FW 27.0.6) where both the
runtime and persistence layers were flipped and the device still
dialed the previously-cached `/updates/soundtouch` URL plus
DNS-intercepted `/streaming/software/update/account/*`. The probe URL
was never observed.
Marks DEPRECATED:
- pkg/service/setup/telnet_probe.go: ProbeRegistrar,
TelnetProbeResult, generateProbeToken, RunTelnetRoundTripProbe.
- pkg/service/handlers/handlers_telnet_probe.go: HandleTelnetProbe,
HandleProbeInbound, telnetProbeTimeout, telnetProbeResponse.
- pkg/service/handlers/probe_registry.go: probeRegistry.
- Server.probes field.
- /probe/{token}[/*] and /setup/telnet-probe/{deviceId} routes.
Adds §9.8 to docs/analysis/TELNET-MIGRATION-METHOD.md documenting the
daemon-cache finding, the diagnostic that confirmed it, the passive
observer replacement, the pre-flight branch on migration state, and
the canonical telnet flow (Apply config → reboot → passive
validation). All code symbols remain in place this commit; the
follow-up commit performs the hard delete.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The feasibility analysis (§§1–8) was written before any of the wizard
shipped, and §7 forecast the surface area roughly. The migration tab
grew considerably during implementation — three-axis state model,
Plan card with per-field URL editor and validation, Customize
three-axis form, visible pre-flight panel, account pairing folded
into the wizard, and the SSH-less round-trip probe — none of which
the original §7 captures faithfully.
Added §9 "What actually shipped (post-implementation addendum)" with:
§9.1 Three-axis state model (per-axis migration booleans, IsPaired,
the state-card layout)
§9.2 Plan card per-field URL editor (single source of URL overrides
for both XML and Telnet, live optimistic preview)
§9.3 Customize three-axis form (URL flip / DNS / CA radios driving
applyCustomPlan)
§9.4 Pre-flight panel (visible check list, decision tree, override
affordances)
§9.5 Telnet round-trip probe (the SSH-less reachability check via
swUpdateUrl flip + :8090/swUpdateCheck trigger + probe-token
registry)
§9.6 Backend additions worth knowing (applyURLOverrides, parser,
option allow-list, telnet timeout bumps)
§9.7 Future probe candidates (pushCustomerSupportInfoToMarge;
running the round-trip probe on SSH-capable speakers too)
§§1–8 stay verbatim as the historical feasibility record, with a
forward-pointer at the head of §7 so readers know the as-shipped
state is documented further down.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
New section §8 records what is currently known about which devices and
firmware our migrateViaTelnet flow handles end-to-end, derived from the
six community sources catalogued in TELNET-COMMAND-REFERENCE.md plus our
issue threads.
* §8.1 — proven to work end-to-end (ST 10, 20, 300, Wave III, Wave IV on
FW 27.0.6 with multi-reporter agreement).
* §8.2 — proven to need the PairAccount telnet fallback (ST Portable,
BST20 Portable: /setMargeAccount missing or wedged on those firmware
builds).
* §8.3 — likely to fail (SA-5 on FW 9.x with the older shell generation;
newer ST Portable builds with shrunk command set). The preflight +
abort-on-first-rejection design ensures these fail cleanly, leaving no
half-configured state.
* §8.4 — unverified targets that are expected to work but lack concrete
captures (ST 30, ST 520, Wave Music System I/II).
* §8.5 — flags the apparent contradiction between S5's enumerated
"valid roots" on ST 10 / FW 27.0.6 (which omits envswitch) and #221's
successful envswitch use on the same firmware. Most plausible reading:
S5 is a non-exhaustive probe, not a negative claim; preflight catches
any real absence.
* §8.6 — maps every failure mode to its observable outcome and the unit
test that exercises it.
* §8.7 — TL;DR.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Synthesises every Bose SoundTouch port-17000 telnet command we have evidence
for, across six community sources: flarn2006's 2014 root-shell post,
Sam Hobbs's 2016 ST 10 setup-mode walkthrough, izndgroup's 2021 reissue,
sijeffrey's 2017 `bose` remote-control script, the 2026 r/bose telnet
probing thread (FW 27.0.6 ST 10), and our own #221 / #236 / soundcork#141
findings.
Groups the commands by family — `key` (front-panel button emulation, the
addition the Reddit thread brought in), `network` (WiFi profile management),
`sys` (verbs + the XML-tag-keyed `sys configuration` setter our migration
uses), `envswitch` (parallel persistence layer), `getpdo` (PDO read), `scm`,
`ws`, `swupdate`, and the historic shell-unlock commands. Each entry notes
firmware-era availability so implementations know whether to expect
"Command not found" on newer builds.
Records the four top-level command roots that S5 confirmed reachable on a
vanilla FW 27.x ST 10 (`key`, `net`, `sys`, `getpdo`), and flags that
`envswitch` works on other ST 20 / Wave models running the same firmware
family — a per-model variation the migration's preflight already handles.
Cross-linked from TELNET-MIGRATION-METHOD.md §2 and indexed in SUMMARY.md.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds an SSH-free third migration path that drives the SoundTouch device's
diagnostic shell on TCP port 17000, plus a hardened replacement for the
fragile /setMargeAccount HTTP pairing call.
* `pkg/telnet` — new reusable, dependency-free client (sibling of `pkg/ssh`)
with deadline-driven Dial / Probe / SendCommand / Close. Mock-server tests
cover happy path, command-not-found, mid-stream close, and the wedged-device
read-timeout scenario.
* `setup.MigrationMethodTelnet` — runs `sys configuration` for all four URLs
plus the parallel `envswitch boseurls set` persistence layer that otherwise
wins on reboot, then verifies with `getpdo CurrentSystemConfiguration`.
Aborts on the first non-OK response so configuration is never half-written.
No SSH backup or rw pre-flight (the path is SSH-free by design).
* `setup.PairAccount` — probes :8090/supportedURLs first, time-bounds
POST /setMargeAccount aggressively (5s connect / 12s total) to avoid the
hangs reported in #236, and falls back to `envswitch accountid set <id>`
over telnet when the HTTP endpoint is missing or wedged. Returns a
PairAccountResult breadcrumb so the UI can show which path actually
succeeded.
* `setup.Reboot(deviceIP, method)` — gains a RebootMethod selector;
RebootMethodSSH stays the default (preserving prior behavior),
RebootMethodTelnet sends `sys reboot` over a fresh telnet session and
treats the inevitable socket-close as success.
* New endpoints on `/setup`:
- GET /account-id-suggestions/{deviceId} — returns the device's current
margeAccountUUID (from :8090/info) plus known account IDs from the
datastore, so the UI can offer reuse.
- POST /pair-account/{deviceId}?account_id=NNNNNNN — invokes PairAccount;
the existing reboot endpoint reads ?method=ssh|telnet from the query
string.
* Helpers `IsValidAccountID` (exactly 7 digits) and `GenerateAccountID`
(crypto/rand, retries on collision against a known-IDs list).
Documentation in docs/analysis/TELNET-MIGRATION-METHOD.md is updated to match
the implementation: bare-URL convention for `soundtouch-service`, no automatic
`sys reboot` (user-initiated via the existing button with a method selector),
and the realised package layout. The /etc/hosts method is intentionally not
exposed in the new flow.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Documents the SSH-free third migration path on top of the device's diagnostic
shell, synthesised from #221, #236, scheilch/opencloudtouch#167,
deborahgu/soundcork#228, and deborahgu/soundcork#141.
Captures the URL configuration command sequence, the dual persistence layers
(`sys configuration` + `envswitch boseurls set`), the `/setMargeAccount`
failure modes (404, hang, post-migration 502 on power_on) with their bounded
fallbacks, port-17000 preflight requirements, and account-ID sourcing rules
(reuse from `:8090/info`, pick from `DataStore.ListAccounts`, or 7-digit
manual/randomized entry). Cross-links the new doc from
DEVICE-REDIRECT-METHODS.md, marks the `/etc/hosts` method as deprecated, and
fixes the existing margeServerUrl example to use our service's bare-URL
convention with an explicit note for soundcork's `/marge` sub-path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Add scripts/android/ with setup-mitm-avd.sh (one-time) and start-mitm-session.sh (per-session)
- Move frida Dockerfile to scripts/android/; extract frida-server + SSL scripts via Docker
- Use native macOS mitmproxy app for capture (Docker NAT blocks emulator traffic)
- Add native-connect-hook.js to Frida launch — required for Bose app's native networking
- Document verified AP mode Wi-Fi provisioning endpoint (POST :8090/addWirelessProfile)
- Correct factory reset sequences for ST10/ST20 from official Bose guides
- Remove old scripts/setup-mitm-avd.sh and scripts/start-mitm-session.sh (moved to android/)
- Add session trace with lessons learned from first interactive capture run
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Mark ZeroConf Spotify priming and 404 handler as addressed in both docs
- Remove stale "Remaining gaps" and "Already adopted" tracking tables from
community-tools.md; detail now lives in PARITY-SOUNDCORK.md
- Update PARITY-SOUNDCORK.md summary to reflect Groups and ZeroConf as done;
add cross-reference to community-tools.md
- Rename remaining "gesellix" project references to "AfterTouch" throughout
community-tools.md (URLs and author attribution unchanged)
- Add soundcork-stockholm-app (entry 7) to community projects list
- Correct DNS priority entry: built-in DNS server requires no external tools
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
feat: improve Bose SoundTouch parity, Spotify integration, and data
reliability
- Update XML marshaling for ServicePreset and ServiceRecent to match
Bose parity requirements.
- Add support for adding music sources via
`/streaming/account/{account}/source`.
- Implement HandleBoseAccountToken for Spotify OAuth code exchange and
token persistence.
- Implement atomic file writes in the datastore to prevent data
corruption.
- Add startup logic to initialize default sources for existing devices.
- Expand test coverage with new parity regression and Spotify
integration tests.
---------
Co-authored-by: Junie <junie@jetbrains.com>
Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com>
