Health check (checks_stale_internet_radio.go): detects stub INTERNET_RADIO
sources (empty credentials) left on devices initialised before the stub was
removed from the default source list. Quick-fix removes by ID; skips any
INTERNET_RADIO source that has real credentials.
Datastore: DeleteSourceByID and DeleteSourceByType (uniqueness-guarded).
API: DELETE /setup/sources/{account}/{device}/{sourceID}
CLI — two new commands:
soundtouch-cli cloud source remove --service-url ... --account ... --device ... [--id 10002 | --type INTERNET_RADIO]
Talks to AfterTouch (service side). --type resolves to canonical ID
locally; fails for unknown types.
soundtouch-cli source notify-updated --host <speaker-ip>
Talks to the speaker directly. Fetches device ID from /info, then
POSTs sourcesUpdated to :8090/notification so the speaker re-fetches
its source list immediately.
CloudCommonFlags (--service-url / AFTERTOUCH_URL) mirrors CommonFlags
(--host) for AfterTouch-facing command groups.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The speaker firmware constructs the OAuth host by appending "oauth" to
the first label of the configured streaming hostname (aftertouch.lan
→ aftertouchoauth.lan, used by both Spotify and Amazon Music token
refresh). AfterTouch's DNS server previously only hijacked the
hardcoded list of Bose hostnames, so operators self-hosting at a
custom hostname had to add the OAuth alias themselves — and the
amazon-music-oauth.md / spotify-overview.md docs incorrectly
claimed the DNS server handled it automatically.
ofthesun9 (#337) caught this via the worst variant: IP-based
serverURL (192.168.0.30 → 192oauth.168.0.30), which is a malformed
hostname no DNS resolver can answer for. There is no clean DNS
workaround for the IP case — the operator must use a hostname.
Three changes:
- pkg/discovery/dns.go DeriveOAuthHostnames parses the configured
serverURL, derives <first-label>oauth.<rest> when the host is a
hostname (not IP), and adds it to the DNSDiscovery hijack list. IP
serverURLs deliberately yield no derivation — the malformed name
isn't worth handling and the new health check surfaces the trap.
- New checks_oauth_target health check fires a Warning when serverURL
is an IP literal, with a concrete example of the malformed name
(`192oauth.168.0.30`) and a ManualCommand pointing at the switch.
- amazon-music-oauth.md and spotify-overview.md rewritten: drop the
false "automatic" claim, document the three resolution paths
(AfterTouch DNS + speaker resolves via it / external LAN DNS /
per-speaker /etc/hosts), and explicitly flag IP-based --server-url
as incompatible with OAuth on either provider.
Tests cover the derivation matrix (hostname / IPv4 / IPv6 / single
label / empty / garbage URL), shouldIntercept's new behaviour
(derived host hit, base host not auto-hijacked, case-insensitive),
the health check's four states, and the malformed-host helper.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Four small, independent improvements bundled into one cut:
1. Restrict device discovery to SoundTouch-family services (#269/#359).
- mDNS now queries all three SoundTouch service-type variants in
parallel (_soundtouch._tcp, _bose-soundtouch._tcp, _soundtouchstick._tcp)
and deduplicates results by host:port. mDNS has no native wildcard
for service types, so we fan out one query per variant.
- UPnP/SSDP M-SEARCH receives a manufacturer/modelName check after
fetching the device description: devices whose manufacturer doesn't
contain "bose" AND whose model doesn't contain "soundtouch" are
rejected. Closes the loop on NorbertBauer's diagnostic bundle that
showed a Dreambox dm920 and Onkyo HT-R695 living under the default
account because they answered our generic MediaRenderer:1 probe.
2. New health check: default-account-contains-non-Bose-devices (#269).
Walks devices keyed under data/accounts/default/devices/, flags any
whose ProductCode/Name doesn't look SoundTouch, and offers an Evict
QuickFix. Bose devices still in default (legitimate pre-pair) are
intentionally ignored — that's the consistency check's domain.
3. Clipboard fallback for Copy buttons (#355). The two health-tab Copy
buttons used navigator.clipboard.writeText, which requires a secure
context. Over plain HTTP at a LAN IP the browser blocks it silently
and the button shows "Copy failed". New copyTextToClipboard helper
tries the modern API first, falls back to document.execCommand("copy")
via an off-screen textarea.
4. Web UI static-asset cache-busting (#345). dekiesel needed Ctrl+F5 to
see the v0.89 Download button after upgrade. The root HTML now
carries a ?v=<hash> query string on /web/js/script.js and
/web/css/style.css references. Hash is sha256 over the embedded asset
bodies, truncated to 12 hex chars — stable per binary, changes when
the assets change.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Operators who deploy AfterTouch on an IP-only host (no DNS hostname) and
who get a speaker_marge_url health warning previously had to SSH in, edit
their systemd unit or docker-compose, add --tls-extra-host, and restart.
The fix is now reachable from the UI:
- datastore.Settings gains TLSExtraHosts []string. At startup
applyPersistedSettings merges CLI/env values (still authoritative)
with persisted ones, deduplicating while preserving order.
- /setup/settings (GET) exposes tls_extra_hosts (editable list) and
tls_san_hosts (the full effective SAN list, read-only).
- /setup/settings (POST) accepts tls_extra_hosts (*[]string so callers
can distinguish "field omitted" from "explicitly empty").
- Settings tab grows a "TLS extra hosts" textarea + an info panel
explaining the restart-required dance.
- speaker_marge_url emits a QuickFix labelled "Add <host> to TLS hosts"
alongside the existing CLI manual command. The fix re-probes the
device's /info, extracts the margeURL host, and appends it to the
persisted list — race-safe against stale findings.
- HTTPS-SETUP.md documents both paths.
Tests cover: merge dedup + ordering + whitespace, the new QuickFix
emission shape, and the margeURL host extraction across HTTPS/HTTP/bare
input forms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Closes the loop on the empty-<margeAccountUUID> finding from
RegisterSpeakerInfoReachable. Operators in #329 quoted that finding
verbatim and asked "What is the recommended way to complete pairing?"
— the framework detected the condition but offered no in-UI recourse.
The QuickFix completes pairing in-place by dispatching through
setup.Manager.PairAccount, which tries HTTP /setMargeAccount first
and falls back to telnet `envswitch accountid set` — same code path
the existing POST /setup/pair-account/{deviceId} handler uses.
Account ID is picked at finding-time when a real (7-digit) account
directory already contains this device on disk (typical scenario:
AfterTouch remembers a previous pairing the speaker forgot). When
no such account exists, the executor generates a fresh 7-digit ID
via setup.GenerateAccountID at click time. Either way, the chosen
ID is named in the Confirm dialog and the CLI ManualCommand
fallback so the operator can see what's about to happen.
Architecturally: the FixID constant lives in the health package
alongside the check that emits the finding, but the executor is
registered from handlers/server.go where setup.Manager is
available. This keeps the health package's transitive dep surface
small (the boundary comment near speakerInfoXML deliberately
forbids importing setup, which would pull SSH/telnet/certmgr).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The orphan-account QuickFix used to rely solely on the operator's
manual log inspection ("Before deleting, verify the speaker isn't
currently PUTting to account X") plus the Confirm dialog. Adds a
defensive layer: the speaker itself answers "which account do I
belong to?" via :8090/info's <margeAccountUUID> element. Wire that
into both ends of the flow.
Detection (consistency check): on each scan we probe /info for each
device with a known IP. When the speaker answers, its
margeAccountUUID overrides the on-disk ListAllDevices guess, and the
finding's Details/Confirm copy quotes the speaker verbatim — "Speaker
/info reports margeAccountUUID=1111111; this directory (account
9569497) is stale because the speaker has stopped targeting it." If
the probe fails the wording falls back to the manual-verify hint.
Executor (deleteOrphanAccountEntry): re-probes /info before deleting
and refuses when the speaker reports target.Account as live. That
closes the race where the operator re-paired between scan and click.
Logs every successful probe + decision for auditability.
fetchSpeakerMargeAccount split into a URL-injectable variant so the
httptest-driven tests can verify the probe end-to-end without
hard-coding :8090 onto an unreachable address.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
og-gh's #343 reproducer is built-in radio sources sitting on
non-canonical IDs (the 2000001+i fallback that GetConfiguredSources
hands out when on-disk sources lack canonical IDs). After re-pair
churn, presets binding by <sourceid> end up rebound to whichever
source happened to get the colliding numeric ID — silently rewriting
e.g. a TUNEIN preset to RADIOPLAYER on the next /full fetch.
The strict-match commit (aa449fb) keeps that drift from corrupting
emission downstream, but the underlying Sources.xml is still wrong
and the operator has to either pull-from-speaker (online) or
hand-edit XML (tedious). This commit adds an offline QuickFix that
rewrites the source IDs in Sources.xml back to canonical
(TUNEIN→10004, INTERNET_RADIO→10002, LOCAL_INTERNET_RADIO→10003,
RADIO_BROWSER→10005) and updates every <sourceid> reference in
Presets.xml/Recents.xml in lockstep.
Skipped when the canonical ID is already in use by another source
(e.g. duplicate TUNEIN entries from manual XML editing) — collisions
need operator review. Idempotent: a second click is a no-op when
everything is already canonical.
The fix is reachable from the consistency check finding, gated by
the framework's standard Confirm dialog which enumerates the exact
ID rewrites before executing. No speaker contact required; the
speaker re-fetches /full on its own and picks up the new IDs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The orphan-account-entry finding (introduced in 0ac140f) currently just
points the operator at a copy-pasteable rm -rf command. Adds a
QuickFix button that does the same delete in-process after the
operator confirms via the standard health-framework Confirm dialog.
Findings are now one-per-(stale_account, device) pair so each delete
button targets exactly one directory. The Confirm copy spells out the
full path being removed and reminds the operator that the active
account isn't touched. The companion ManualCommands entry keeps the
shell-side rm available for operators who prefer to run it themselves.
deleteOrphanAccountEntry refuses on missing account/device, errors
explicitly when the directory was already cleaned up by hand, and
logs every successful removal so the action is auditable from the
service log.
The framework gates the click on Confirm — destructive operations
need operator consent per CLAUDE.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
User reported "we might have another issue with the account mapping"
after the prior commit only handled the default-vs-real case. The
backup at /backup/var_20260520_01 showed device A81B6A536A98 living
under four directories — accounts/9569497, accounts/default,
accounts/1111111, and the top-level default/ — only the third of
which currently receives the speaker's PUTs.
The authoritative "which account does this device belong to" signal
is the URL of the speaker's incoming PUT (per "speaker decides"),
which only the live handler observes. mtime is a proxy and can be
fooled by backup tools, manual touches, etc., so this commit drops
the mtime tiebreaker the previous attempt added.
Instead:
- ListAllDevices' dedup keeps default-deprioritisation (clear
placeholder semantics) but otherwise picks the first real account
encountered in stable alphabetical order. No heuristic guessing
among real accounts.
- New AllAccountsForDevice(deviceID) enumerates every on-disk
account directory containing the deviceID.
- The consistency check's orphan finding now lists every stale
account dir for each device, with the path the operator needs to
inspect and a pointer to the service log so they can verify which
account the speaker is actually targeting before deleting
anything.
We don't delete automatically — destructive filesystem actions need
explicit operator consent (CLAUDE.md "destructive actions" rule).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ListAllDevices used to let an entry under accounts/default/devices/<id>
replace the real-account entry for the same physical device whenever
the default-side DeviceInfo.xml had a non-empty <name>. The consistency
check then reported the device under "account default" even while the
speaker was happily POST/PUT'ing to its actually-paired account — the
operator saw "preset slot 1 present on speaker but missing from
service" for slots that very obviously did exist, just under the real
account they couldn't see.
The dedup now treats "default" as a fallback placeholder: sorts it to
the back of the iteration, and never lets it replace a real-account
entry. A default-only device (fresh discovery, never paired) is still
returned exactly as before.
Also adds an orphan-detection finding in the consistency check that
walks accounts/default/devices/ directly and flags entries whose
deviceID is also paired under a real account, with a copy-pasteable
rm -rf hint. We don't delete automatically — destructive filesystem
actions need explicit operator consent (CLAUDE.md).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The pre-fix marge.syncPresets / syncRecents path persisted the upstream
cloud's <source type="Audio"> attribute into ServicePreset.Source /
ServiceRecent.Source. That value doesn't match what the speaker writes
via its own /presets endpoint (which is the source of truth), and one
operator's consistency-check scan surfaced ~50 recent_mismatch findings
all tracing back to this single leak.
GetPresets / GetRecents now repair the leak on load: when persisted
Source is "Audio" (or empty) AND SourceID resolves in the current
Sources.xml, substitute the speaker-perspective SourceKeyType. The
repair fires only on the *leak signature* — when persisted Source
carries a non-leak symbolic value like "TUNEIN", we never touch it.
That asymmetry is load-bearing for GH-343: a TUNEIN preset whose
SourceID has been re-classified to RADIOPLAYER in Sources.xml stays
TUNEIN here. The speaker's previously-stored intent wins over a stale
current source-list entry — soundcork's blind matching_src.source_key_type
substitution is the silent rewrite we're protecting against.
Also:
- sourceKeyTypeFromFullSource now logs when the providerid isn't
canonical and we fall back to upstream Type, so future leak
signatures are visible instead of silent.
- Removes the loadServiceView workaround that resolved Source via
SourceID at consistency-check time — datastore now repairs at
the layer where every consumer benefits.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
First operator run of the new consistency check surfaced both real bugs
and a lot of noise. This commit refines the report so the remaining
findings are actionable.
Real bugs fixed:
- loadServiceView now resolves preset/recent Source via SourceID lookup
against Sources.xml, instead of trusting the persisted Source field.
syncPresets / syncRecents in sync.go currently writes the upstream
FullResponseSource.Type ("Audio") into ServicePreset.Source, which
made every cross-side mismatch finding read "service source='Audio'".
Underlying syncPresets/Recents misfeature is a separate fix; the
consistency check stops being fooled by it.
- Duplicate-source dedup keyed by type+account, not just type.
SpotifyConnectUserName + SpotifyAlexaUserName, QPlay1UserName +
QPlay2UserName are legitimate sub-accounts of the same source type
and used to falsely trip duplicate_source warnings.
Noise removed:
- Cross-side source_mismatch comparison dropped. Speaker /sources
enumerates local I/O sources (AUX, BLUETOOTH, AIRPLAY, QPLAY, …),
service Sources.xml tracks credentialed streaming sources (TUNEIN,
INTERNET_RADIO, …). They legitimately don't overlap on most types,
so the asymmetry was pure noise.
- Internal-consistency check restricted to the service side. Streaming
sources are never in the speaker's /sources by design (they're
proxied through BMX), so a TUNEIN preset on the speaker always
looked "dangling" against speaker /sources.
- Service-only / speaker-only recent cascade collapsed into one
summary line when 5+ speaker recents are missing from service.
- New short-circuit: when the service has nothing (presets, recents,
sources all empty) for a device the speaker clearly has state for,
emit one "this device looks unsynced, click Sync" warning instead
of dozens of per-slot mismatches.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a new health check that surfaces preset / recent / sources
inconsistencies operators previously had to dig out by hand. For every
paired device, the check runs three analyses:
1. Service-side internal consistency. Verifies every Presets.xml and
Recents.xml entry's <sourceid> resolves to a Sources.xml entry, and
flags duplicate source-type entries (mapPresetsToFullResponse picks
the first match, so duplicates can mask GH-343-style cross-type
binds).
2. Speaker-side internal consistency. Same analysis applied to the
speaker's :8090 XML — catches the case where the speaker locally
knows a TUNEIN preset but the speaker's /sources list doesn't
advertise TuneIn (a #253-class trigger).
3. Cross-side comparison. Speaker vs service per slot / per recent /
per source type. A preset whose source attribute disagrees between
sides is flagged with both values in the detail — that's the
GH-343 footprint after a reboot, and now it shows up as a Finding
instead of a forum thread.
Speaker probes fail gracefully with a copy-pasteable curl block; the
service-side internal check still runs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
CodeQL alert 147 flagged the Phase-2 re-dial with
InsecureSkipVerify=true, used to read the served leaf after
Phase 1's strict verification failed.
The leaf is already reachable without a second connection:
tls.CertificateVerificationError carries
UnverifiedCertificates, and the three x509.* verification-
error types each carry the offending Cert. errors.As over
those covers darwin (Security.framework) and linux
(crypto/x509) consistently.
Same three classifier outcomes
(leafFromOwnCA/leafSubjectEqualsIssuer/leafForeign), same
chainContext rendering — the classifier reads only the leaf,
which is byte-identical to the Phase-2 peers[0]. Removes the
only InsecureSkipVerify literal in the tree.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The previous classifier always returned SeverityWarning when the
served leaf didn't validate against the service host's system
trust store. For AfterTouch's *default* deployment shape (its
own self-signed CA), that's the expected, healthy state — the
service host's trust store deliberately doesn't include our CA;
speakers establish trust via `setup install-ca`, not via system
roots. Reporting it as a warning misled non-technical operators
into thinking something was broken.
Rework the severity matrix:
- leafFromOwnCA (signature-verified): INFO. Message says
"AfterTouch is serving its own self-signed CA chain
(expected)". Details explain the service-host trust-store
state is by design. Manual command becomes a reminder
rather than a fix.
- leafSubjectEqualsIssuer (heuristic): INFO. Explains the
heuristic and offers both install-ca (if it is AfterTouch)
and openssl (if it isn't) as paths.
- leafForeign (genuinely unexpected): WARN. Unchanged
semantics; this is the case that actually wants attention.
- connection failure: ERROR. Unchanged.
Title renamed from "HTTPS endpoint certificate validates" (which
read as a binary assertion the finding contradicted) to
"HTTPS endpoint TLS configuration".
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Separate check from service_cert_chain: that one inspects what's
served right now, this one watches when the trust anchor itself
will stop being usable. Even when the served leaf validates,
the CA's NotAfter will eventually expire every leaf it has ever
issued — and every paired speaker would then need
`setup install-ca` again with a freshly generated CA.
Three thresholds against the loaded CA's NotAfter:
> 90 days remaining → no finding (rolls up to OK)
31..90 days → INFO, surfaces the renewal date so it
isn't a surprise
1..30 days → WARNING with regeneration guidance
expired → ERROR — speakers will reject leaves
ManualCommand renders the actual cert path from
certmanager.GetCACertPath() so operators don't have to guess
where to delete. Sibling .key path inferred from the cert path
basename — close enough for a copy-paste hint; operators verify
before running.
Rounded day arithmetic via (d + 12h) / 24h to avoid the
"expires in 59 days" surprise caused by ASN.1 GeneralizedTime
truncating sub-second precision on the CreateCertificate /
ParseCertificate round-trip.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The DNS sanity check passed bindAddr directly to dns.Client.Exchange.
Wildcard binds like "0.0.0.0:53", "[::]:53", or the empty
string (which the dns lib treats as default port 53 on all
interfaces) aren't actually dialable from inside the same
host — net would refuse the empty string outright, and our
finding rendered "Queried ." in the operator's UI.
resolveDNSQueryTarget now translates:
"" → 127.0.0.1:53
":53" → 127.0.0.1:53
"0.0.0.0:53" → 127.0.0.1:53
"[::]:53" → 127.0.0.1:53
"192.0.2.10:53" → unchanged
"53" → 127.0.0.1:53
"example.com" → example.com:53
The finding's Details now exposes both the configured bind and
the effective query target separately, so when queries still
fail the operator can tell whether the server simply isn't
listening on a dialable address vs. responding with the wrong IP.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The Subject==Issuer heuristic for "this is AfterTouch's
self-signed cert" misses the common case: AfterTouch's internal
CA has CN="SoundTouch Local Root CA" while leaves it issues have
CN="soundtouch" — different Subject and Issuer strings, so the
classifier was falling through to "foreign chain" and suggesting
openssl s_client when install-ca was actually the right fix.
Replace the heuristic with a definitive check: load AfterTouch's
own CA leaf via setup.Manager.Crypto.GetCACertPath() and call
x509.Certificate.CheckSignatureFrom(ca). When that succeeds we
*know* the leaf came from our own CA. The Subject==Issuer
heuristic stays as a fallback for environments where the CA
isn't loadable (with a clarifying note in the hint).
Server.loadOwnCACert caches the parsed CA via sync.Once so
repeated Health polls don't re-read the PEM.
Fixes the case shown in soundtouch.fritz.box deployments where
Subject=CN=soundtouch,O=AfterTouch and Issuer=CN=SoundTouch
Local Root CA,O=SoundTouch Local Service confused the
classifier.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Standalone version of the sources-refresh trigger the
sources_xml_diff check emits opportunistically — exposed per
device regardless of whether drift was detected, since operators
also use it after manual Sources.xml edits or after running the
sources_xml_present quick fix.
Quick fix POSTs `<updates><sourcesUpdated/></updates>` to the
speaker's /notification endpoint. Manual command of equivalent
shape provided for cloud-deployed setups where the service
can't reach the speaker.
Recurring debug pattern from #175, disc #223, implied in #314.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Queries this service's own DNS server for every intercepted
Bose hostname (api.bose.com, content.api.bose.io, etc.) and
verifies the answer is the configured service IP. Catches:
- DNS subsystem disabled or unbound (speakers using us as
their resolver get NXDOMAIN).
- DNS running but answers point at a stale IP (operator
changed the LAN address without restarting).
- Subset of intercepts silently failing — emits the failing
hostname list explicitly so it's obvious which patterns are
falling through shouldIntercept.
For the mismatch case the finding includes a copyable
`nslookup … <our-dns-bind>` so operators can verify the same
behaviour from the speaker's network.
To avoid duplicating the intercept list, exports it as
`discovery.InterceptedBoseHosts` instead — same string slice
that DNSDiscovery.shouldIntercept walks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Probes http://<ip>:8090/presets for each device and counts the
returned <preset id=…> entries against the service-side
Presets.xml count. Three outcomes:
- Match: no finding.
- Speaker has 0 while service has entries: WARNING — the
post-migration / post-reset preset-loss pattern from
discussion #295 and #235.
- Counts differ otherwise: INFO with both numbers in the
message, so the operator can decide whether to sync.
Reachability / parse failures degrade to info-level findings
with a copyable curl command, matching the dual-mode pattern
the rest of the slice uses.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Recurring failure mode in issues #218 and #224: presets saved
before the May 2026 cloud shutdown still carry
content.api.bose.io/.../orion URLs in their <location>, which
the speaker fetches directly post-migration. Result: playback
silently fails because the dead host can't serve the request
and the speaker has no fallback path.
Passive filesystem scan over every device's service-side
Presets.xml; emits a warning per device listing the affected
preset slot IDs and a copyable sed snippet that strips the dead
host prefix, leaving the BMX-relative /v1/playback/... path
that this service can resolve.
No probe, no LAN access needed — purely a service-side data
check, so it's also safe to run on cloud-deployed AfterTouch.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For each known device, surface an info-level finding with a
"Play ding" quick fix and an equivalent curl command. The fix
POSTs an INTERNET_RADIO ContentItem to the speaker's /select
endpoint pointing at <serverURL>/media/aftertouch-ding.wav — the
asset committed earlier in this branch.
No external dependency (unlike TuneIn-based playback tests from
issues #94, #175, #188, #214, #218, #224, #235, #253, #262,
#272), so it works for cloud-deployed AfterTouch as long as the
speaker can reach the service URL.
Dual-mode by construction: the curl command in ManualCommands
is the same shape the server-side fix uses, so operators on
LAN-isolated setups can paste it and trigger the same playback
from a reachable host. Skipped (with an explanatory finding)
when SERVER_URL isn't configured — the speaker would have
nowhere to fetch the audio from.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Cloud-deploy reports (discussion #295 et al.) repeatedly came
down to "does the speaker trust AfterTouch's cert?". Add a check
that dials the configured HTTPS endpoint, attempts validation
against the system trust store, and:
- Says nothing when the chain validates — typical for a public
CA chain (Let's Encrypt, etc.) the speaker firmware trusts
natively. No action needed.
- Warns when validation fails and surfaces the chain context:
subject, issuer, SANs, expiry, and the underlying error so
operators can copy a diagnosis into a bug report. Includes a
copyable suggestion — install-ca when the leaf looks
self-signed (Subject == Issuer heuristic), or an
`openssl s_client` invocation for unknown/foreign chains.
Reads the HTTPS URL via a closure on Server.GetSettings(), so
later restarts pick up new URLs without re-registration.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For each device, probe /info and extract the <margeURL> the
speaker is configured to talk to. Compare the hostname against
the service's expected-hosts list (serverURL host +
httpsServerURL host + --tls-extra-host values).
When the speaker is pointed at a host AfterTouch doesn't claim,
emit a warning with two pieces of context:
- the actual <margeURL>, so the operator sees the drift
- a copyable `soundtouch-service --tls-extra-host=<host>`
suggestion, which is the right fix when the speaker should
keep talking to AfterTouch via the unexpected hostname (the
other fix is re-migration, which is mentioned in the details).
Reachability / parse failures are intentionally silent here —
speaker_info_reachable already covers those, no need to double-warn.
Required plumbing: Server.SetExpectedHosts so main.go can pass
config.domains in, plus an ExpectedHosts() getter the closure-form
registration reads at run time.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For each device, probe http://<ip>:8090/sources and compare the
set of source types against the service-side Sources.xml. The two
documents have *different* schemas (sourceItem attributes vs.
source elements with sourceKey children), so we compare the
extracted type sets rather than diffing XML directly.
Two finding shapes:
- WARN: service advertises types the speaker doesn't have
(e.g. TUNEIN, RADIO_BROWSER missing after a factory reset).
Includes a copyable POST /notification command that triggers
a sourcesUpdated refresh without a reboot.
- INFO: speaker has types the service doesn't know about
(mostly harmless — usually AUX or BLUETOOTH-style local-only
sources). Surfaces it so operators notice managed sources
that drifted out of the service config.
Recurring debug pattern from issues #175, #195, #214, #218, #236,
disc #315.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For every known device, probe http://<ip>:8090/info from the
service and emit findings for:
- Unreachable speakers — surfaces a copyable curl command the
operator can run from a host on the speaker's LAN.
- Speakers replying 200 but with empty <margeAccountUUID> —
the TPDA pairing-state failure mode documented in
discussion #223 ("Account ID = (empty)" in logread).
- Non-200 HTTP responses and malformed /info bodies, both as
warnings with the underlying detail in the finding.
Uses the ProbeGet helper from the previous commit; the dual-mode
fallback is the curl command emitted via ManualCommands when
server-side reach fails — appropriate when AfterTouch is hosted
off the speaker's LAN.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Diagnostic checks coming next need to talk to speakers on the
LAN, which the service can't always reach — e.g. AfterTouch
hosted publicly while the operator's browser sits on the speaker
subnet. Establish the dual-mode primitive first so subsequent
checks can use it consistently:
- ProbeGet(ctx, url, timeout) issues a short-timeout GET and
always returns a CurlCommand the operator can run from a host
that can reach the target, regardless of whether the
server-side fetch succeeded.
- Finding gains an optional ManualCommands field; the admin UI
renders each as a labelled, copyable code block with a Copy
button and an optional hint line.
No new checks yet — that's the next commit. This one only adds
the primitive and the rendering path so each subsequent check is
a one-file diff.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Discussion #295 surfaced that a paired device without Sources.xml
silently breaks playback — /full omits TUNEIN and selection fails
with 1005. initializeDefaultSources only runs at startup over
existing devices, so a device that checks in later is never
seeded.
Add a Health tab to the admin UI that runs registered checks
against the datastore and offers one-click remediations. The
first check flags missing Sources.xml per device; its quick fix
writes the canonical defaults via SaveConfiguredSources. The
check/fix registry is designed so adding Presets.xml,
Recents.xml, or future reachability probes is a one-file diff.
- New /setup/health (GET) and /setup/health/fix (POST) routes
- pkg/service/health: Registry, Check, Finding, QuickFix types
- Sources.xml-present check + create_default_sources fix
- "7. Health" tab in pkg/service/handlers/web/
Inspired by issue #327's MAINTENANCE tab proposal; curl/URL
helper content from that issue can slot into the same tab in
a follow-up.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
