The on-device and Raspberry Pi installers hardcoded the release version, which
had to be bumped on every release. Default VERSION to empty and resolve the
newest tag by following GitHub's documented stable redirect
(https://github.com/<repo>/releases/latest -> .../releases/tag/vX.Y.Z), reading
the effective URL. This avoids the GitHub API rate limit and needs no jq.
An explicit version (positional arg / VERSION= / --version) still pins a
release. If the lookup fails (offline, rate-limited, or a curl without -w
support), each script falls back to a pinned FALLBACK_VERSION so installs still
work. The Pi self_update path runs after resolution, so it fetches the resolved
tag's installer.
Docs updated to state the default installs the latest release; the pinned-version
examples remain as illustrations.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The installer docs and the on-device + Raspberry Pi installer scripts all
defaulted to and showed v0.107.0. Update every install example and the
VERSION defaults to the current release v0.111.3 across the on-device and
Pi guides and scripts.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Update v0.103.0 -> v0.104.0 across installer scripts, walkthrough docs,
and example go.mod files, and refresh the devices/migration/settings/sync
UI screenshots.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Add scripts/raspberry-pi/install-web.sh: mirrors install.sh but for
the stateless soundtouch-web binary (no privileged ports, no data dir,
no HTTPS). Default port 8080; override via HTTP_PORT at install time.
- Add GET /health to soundtouch-web (handler + mount); returns
{"status":"ok","version":"…"} — used by the installer's health check
and by monitoring.
- Update scripts/raspberry-pi/README.md to document both installers side
by side (installation, config, service management, updates, removal).
- Bump default VERSION to v0.97.0 in all three installer scripts
(install.sh, install-web.sh, on-device-install/install.sh).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Files in cmd/ examples/ scripts/ referenced docs/guides/ and docs/reference/
which moved to docs/content/docs/guides/ and docs/content/docs/reference/.
A few links to loose files at the docs/ root were updated to their new
location under docs/content/docs/appendix/.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- aftertouch init script: stop) now waits up to 15 s for SIGTERM
to take effect, then escalates to SIGKILL; prevents stale daemon
processes after '/etc/init.d/aftertouch stop' returns (weissigera's
workaround was manual 'killall aftertouch-service')
- install.sh: add --version / -v CLI flag so the version to install
can be passed as a command-line argument in addition to the VERSION
env var; document the trade-off of the hard-coded default in a
comment; update scripts/on-device-install/README.md with concrete
usage examples for env-override, CLI flag, and rollback tip
- docs/guides/ON-DEVICE-INSTALL-WALKTHROUGH.md: 10-step runbook
derived from weissigera's field-tested procedure (issue #329
comment #4521280831): SSH connection, storage cleanup, install via
install.sh, reboot, SSH tunnel, Health QuickFix, pairing
verification, soundtouch-cli download, custom-radio preset setup,
and final verification; troubleshooting table at the end
Closes#329 (remaining two tasks)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Before overwriting the binary, read its version via --version and save
a copy as aftertouch-service.<version>.backup (falls back to a timestamp
if the flag is absent or the build is a dev build).
After the new binary is in place, delete every older *.backup, *.old,
and *.new artefact in INSTALL_DIR. /mnt/nv on SoundTouch SCM modules
has only tens of MB free; accumulating one ~12 MB backup per upgrade
quickly causes 'no space left on device' on the next download.
Only the backup created in this run (the <current-release>-1 binary) is
kept, giving a single one-step rollback point without wasting disk.
Relates to #329 (on-device install friction reported by weissigera).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Lifts the back-and-forth in issue #250 into the README so the next
user doesn't repeat the same three traps Gustour hit:
1. The `ssh -L 8000:localhost:8000` command must run on the user's
own machine, NOT inside the speaker's SSH session. Gustour
pasted it at the speaker's `root@mojo:~#` prompt; the tunnel
ended up speaker → speaker (loopback) and did nothing.
2. SoundTouch firmware offers only ssh-rsa/ssh-dss host-key
algorithms; modern OpenSSH refuses them by default with
`Unable to negotiate with <ip> port 22: no matching host key
type found`. The README's *initial* ssh command already
uses `-oHostKeyAlgorithms=+ssh-rsa`, but the port-forward
example didn't — adding it.
3. If the tunnel is correct and the browser still gets
ERR_CONNECTION_RESET, the daemon isn't listening. The previous
README left the user stranded here. Adds the diagnostic ladder
(`netstat`, `ps`, `logread | grep aftertouch`) that matches
the syslog-tag pattern shipped in the prior commit, plus the
`/etc/init.d/aftertouch start` + `status` retry — the new
status case can now distinguish "PID alive, listener up" from
"PID alive, listener silently died".
No script changes; pure docs lift.
Refs #250.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Bundles the install-time hygiene work for issues #268 and #250.
# Install location — #268
Stock SoundTouch rootfs has only a few MB free (~4 MB on the ST20
the reporter captured); the AfterTouch binary is ~12 MB. The previous
flow downloaded into tmpfs (/media/aftertouch) and then `mv`'d the
binary into /opt/aftertouch on rootfs — which fails with
"No space left on device" on any speaker with the standard layout.
install.sh now installs to /mnt/nv/aftertouch by default (the
persistent partition, ~30 MB free on the same captures) and points
/opt/aftertouch at it via a symlink so the init script's hardcoded
DAEMON path keeps working unchanged. Power users can override with
INSTALL_DIR=/some/other/path. The interactive prompt from the
community patch in #268's thread is dropped — STDIN is the curl
pipe under the documented `curl | sh` invocation, so a read prompt
would hang or read garbage.
uninstall.sh is updated to resolve the symlink and remove the
target before unlinking, so the 12 MB binary doesn't get orphaned
on /mnt/nv when users uninstall.
# Logging — #250
Issue #250 surfaced a "running but unreachable" state: the install
script reported AfterTouch as running, the init script's status
agreed, but `curl :8000` returned connection-refused. start-stop-
daemon's --background detaches stdout/stderr, so any panic the
daemon emitted before dying went to /dev/null with no diagnostic
trail.
The fix is to route the daemon's stdout/stderr through `logger -t
aftertouch` so output lands in BusyBox syslog — a bounded in-memory
ring buffer that never grows on disk (writing to a file in /mnt/nv
would have eaten the volume over months). Diagnostic flow is now:
logread | grep aftertouch | tail -20
logread -f | grep aftertouch # live tail
Matches the recipe already documented in TROUBLESHOOTING.md for the
speaker's own logs (Curl 7 section).
Tightening on top of the syslog change:
- The init script's `status` case now also curls localhost:8000
when the PID is alive — distinguishes "PID alive, listener up"
from "PID alive, listener silently died" (which is what fooled
everyone on #250). A bare PID-liveness check returned "running"
in both cases.
- install.sh's post-install verification now does its own 10s
curl probe after the init script returns; on failure it tails
the aftertouch syslog so the user sees the actual error rather
than the install script claiming success.
- `exec` is added inside the start-stop-daemon's shell wrapper so
--make-pidfile records the daemon's own PID (not the shell's),
which keeps `stop` semantics correct.
README updated to document the install location, INSTALL_DIR
override, and the syslog tag.
No automated tests — these are shell scripts the install pipeline
runs once on the device. All three scripts pass `bash -n` /
`sh -n` syntax checks. Real validation is end-user retest, gated on
the next release.
Refs #268, refs #250.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
on-device-install and raspberry-pi installers default to the new
v0.79.0 release binary. Also refreshes two stale comment examples in
the raspberry-pi install script (v0.17.0 → v0.78.0, v0.18.1 → v0.79.0)
so the in-file usage hints reflect the same era as the default.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
