diff --git a/docs/content/docs/guides/EXTERNAL-HOST-WALKTHROUGH.md b/docs/content/docs/guides/EXTERNAL-HOST-WALKTHROUGH.md
index 64b3046..1bfa5cb 100644
--- a/docs/content/docs/guides/EXTERNAL-HOST-WALKTHROUGH.md
+++ b/docs/content/docs/guides/EXTERNAL-HOST-WALKTHROUGH.md
@@ -40,7 +40,7 @@ starts on boot.
 To install a specific version:
 
 ```bash
-sudo bash install.sh v0.93.1
+sudo bash install.sh v0.98.0
 ```
 
 Check that the service is running:
@@ -242,7 +242,7 @@ curl -s http://192.0.2.1:8090/presets
 
 ```bash
 sudo bash install.sh              # updates to latest release
-sudo bash install.sh v0.93.1     # updates to a specific version
+sudo bash install.sh v0.98.0     # updates to a specific version
 ```
 
 The installer stops the service, downloads the new binary, and restarts
diff --git a/docs/content/docs/guides/ON-DEVICE-INSTALL-WALKTHROUGH.md b/docs/content/docs/guides/ON-DEVICE-INSTALL-WALKTHROUGH.md
index 9537e40..dd41c65 100644
--- a/docs/content/docs/guides/ON-DEVICE-INSTALL-WALKTHROUGH.md
+++ b/docs/content/docs/guides/ON-DEVICE-INSTALL-WALKTHROUGH.md
@@ -88,10 +88,10 @@ To target a specific version instead of the default:
 
 ```bash
 # Via environment variable (works with pipe-to-sh)
-VERSION=0.92.0 rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh
+VERSION=0.98.0 rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh
 
 # Via command-line flag (pass args after sh -s --)
-curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh -s -- --version 0.92.0
+curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh -s -- --version 0.98.0
 ```
 
 Verify the installed version:
@@ -100,7 +100,7 @@ Verify the installed version:
 wget -qO- http://localhost:8000/health
 ```
 
-The JSON response should include `"version":"v0.93.1"` (or whichever
+The JSON response should include `"version":"v0.98.0"` (or whichever
 version you installed).
 
 ---
@@ -188,13 +188,13 @@ next reboot — which is fine for a one-time setup run):
 cd /tmp
 
 curl -L --fail -o soundtouch-cli \
-  https://github.com/gesellix/Bose-SoundTouch/releases/download/v0.93.1/soundtouch-cli-v0.93.1-linux-armv7
+  https://github.com/gesellix/Bose-SoundTouch/releases/download/v0.98.0/soundtouch-cli-v0.98.0-linux-armv7
 chmod +x soundtouch-cli
 
 /tmp/soundtouch-cli --version
 ```
 
-Replace `v0.93.1` with the version you installed.
+Replace `v0.98.0` with the version you installed.
 
 ---
 
diff --git a/docs/content/docs/guides/RASPBERRY-PI.md b/docs/content/docs/guides/RASPBERRY-PI.md
index 4ffcaba..b8c0470 100644
--- a/docs/content/docs/guides/RASPBERRY-PI.md
+++ b/docs/content/docs/guides/RASPBERRY-PI.md
@@ -36,7 +36,7 @@ You can customize the installation using environment variables:
 
 ```bash
 sudo \
-  VERSION=v0.93.1 \
+  VERSION=v0.98.0 \
   HOSTNAME_FQDN=soundtouch.local \
   HTTP_PORT=80 \
   HTTPS_PORT=443 \
@@ -48,7 +48,7 @@ sudo \
 To update the service to a specific version, run the installer with the version as an argument:
 
 ```bash
-sudo bash install.sh v0.93.1
+sudo bash install.sh v0.98.0
 ```
 
 The installer will automatically fetch the latest version of itself for that release and then update the service binary and restart it.
diff --git a/examples/navigation-station-demo/go.mod b/examples/navigation-station-demo/go.mod
index 2385ceb..26babc2 100644
--- a/examples/navigation-station-demo/go.mod
+++ b/examples/navigation-station-demo/go.mod
@@ -2,7 +2,7 @@ module navigation-station-demo
 
 go 1.26.3
 
-require github.com/gesellix/bose-soundtouch v0.93.1
+require github.com/gesellix/bose-soundtouch v0.98.0
 
 require github.com/gorilla/websocket v1.5.3 // indirect
 
diff --git a/examples/preset-management/go.mod b/examples/preset-management/go.mod
index ea6bf72..1f7a3ae 100644
--- a/examples/preset-management/go.mod
+++ b/examples/preset-management/go.mod
@@ -2,7 +2,7 @@ module preset-management-example
 
 go 1.26.3
 
-require github.com/gesellix/bose-soundtouch v0.93.1
+require github.com/gesellix/bose-soundtouch v0.98.0
 
 require github.com/gorilla/websocket v1.5.3 // indirect
 
diff --git a/scripts/on-device-install/README.md b/scripts/on-device-install/README.md
index ae480cb..1412e70 100644
--- a/scripts/on-device-install/README.md
+++ b/scripts/on-device-install/README.md
@@ -91,14 +91,14 @@ Run the installer again with the version you want to install. The script backs u
 
 ```bash
 # 1. Environment variable (works when piping into sh)
-VERSION=0.92.0 rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh
+VERSION=0.98.0 rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh
 
 # 2. Command-line flag (pass args after `sh -s --`)
-rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh -s -- --version 0.92.0
+rw && curl -sSL https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh | sh -s -- --version 0.98.0
 
 # 3. Download first, then run with a flag
 curl -sSLo install.sh https://raw.githubusercontent.com/gesellix/Bose-SoundTouch/main/scripts/on-device-install/install.sh
-sh install.sh --version 0.92.0
+sh install.sh --version 0.98.0
 ```
 
 Running **without** a version override installs the version hard-coded in the script (the latest release at the time the script was published). That default is updated with each release; if you're running from `main`, it reflects the most recent tagged version.
diff --git a/scripts/on-device-install/install.sh b/scripts/on-device-install/install.sh
index 4d48dd9..208f7fb 100644
--- a/scripts/on-device-install/install.sh
+++ b/scripts/on-device-install/install.sh
@@ -7,13 +7,13 @@ set -eo pipefail
 # picks up the latest binary without extra arguments.
 #
 # Override via environment variable or the --version/-v flag:
-#   VERSION=0.92.0 curl -sSL .../install.sh | sh
-#   curl -sSL .../install.sh | sh -s -- --version 0.97.0
-VERSION=${VERSION:-0.97.0}
+#   VERSION=0.98.0 curl -sSL .../install.sh | sh
+#   curl -sSL .../install.sh | sh -s -- --version 0.98.0
+VERSION=${VERSION:-0.98.0}
 
 # Parse optional command-line arguments so the script can be invoked as:
-#   install.sh --version 0.92.0
-#   install.sh -v 0.92.0
+#   install.sh --version 0.98.0
+#   install.sh -v 0.98.0
 while [ $# -gt 0 ]; do
   case "$1" in
     --version|-v)
diff --git a/scripts/raspberry-pi/README.md b/scripts/raspberry-pi/README.md
index f3886d2..3a50d99 100644
--- a/scripts/raspberry-pi/README.md
+++ b/scripts/raspberry-pi/README.md
@@ -26,7 +26,7 @@ Override defaults at install time:
 
 ```bash
 sudo \
-  VERSION=v0.97.0 \
+  VERSION=v0.98.0 \
   HOSTNAME_FQDN=soundtouch.local \
   HTTP_PORT=80 \
   HTTPS_PORT=443 \
@@ -116,7 +116,7 @@ Override defaults at install time:
 
 ```bash
 sudo \
-  VERSION=v0.97.0 \
+  VERSION=v0.98.0 \
   HTTP_PORT=8081 \
   bash install-web.sh
 ```
diff --git a/scripts/raspberry-pi/install-web.sh b/scripts/raspberry-pi/install-web.sh
index eef2e29..35e04e9 100644
--- a/scripts/raspberry-pi/install-web.sh
+++ b/scripts/raspberry-pi/install-web.sh
@@ -10,12 +10,12 @@ set -euo pipefail
 # Examples (override defaults via env vars):
 #
 #   sudo \
-#     VERSION=v0.95.0 \
+#     VERSION=v0.98.0 \
 #     HTTP_PORT=8081 \
 #     bash install-web.sh
 #
 # Or with a version argument to perform an update:
-#   sudo bash install-web.sh v0.95.0
+#   sudo bash install-web.sh v0.98.0
 #
 # Notes:
 # - This script downloads a release binary for your CPU (auto-detects armv7/arm64/amd64).
@@ -26,7 +26,7 @@ set -euo pipefail
 # - Safe to re-run; it will update the binary, env file, and unit and restart.
 # ==============================================================================
 
-VERSION="${1:-${VERSION:-v0.97.0}}"
+VERSION="${1:-${VERSION:-v0.98.0}}"
 # Normalize version prefix
 if [[ ! "$VERSION" =~ ^v ]]; then
   VERSION="v${VERSION}"
diff --git a/scripts/raspberry-pi/install.sh b/scripts/raspberry-pi/install.sh
index dd4534b..c5125d6 100644
--- a/scripts/raspberry-pi/install.sh
+++ b/scripts/raspberry-pi/install.sh
@@ -10,7 +10,7 @@ set -euo pipefail
 # Examples (override defaults via env vars):
 #
 #   sudo \
-#     VERSION=v0.97.0 \
+#     VERSION=v0.98.0 \
 #     HOSTNAME_FQDN=soundtouch.local \
 #     HTTP_PORT=80 \
 #     HTTPS_PORT=443 \
@@ -18,7 +18,7 @@ set -euo pipefail
 #     bash install.sh
 #
 # Or with a version argument to perform an update:
-#   sudo bash install.sh v0.97.0
+#   sudo bash install.sh v0.98.0
 #
 # Notes:
 # - This script downloads a release binary for your CPU (auto-detects armv7/arm64/amd64).
@@ -28,7 +28,7 @@ set -euo pipefail
 # - Safe to re-run; it will update binary/config/unit and restart the service.
 # ==============================================================================
 
-VERSION="${1:-${VERSION:-v0.97.0}}"
+VERSION="${1:-${VERSION:-v0.98.0}}"
 # Normalize version prefix
 if [[ ! "$VERSION" =~ ^v ]]; then
   VERSION="v${VERSION}"
@@ -117,7 +117,7 @@ detect_arch_asset() {
 download_url_for() {
   local asset="$1"
   # Release asset pattern used by you earlier:
-  # soundtouch-service-v0.97.0-linux-armv7
+  # soundtouch-service-v0.98.0-linux-armv7
   echo "https://github.com/gesellix/Bose-SoundTouch/releases/download/${VERSION}/soundtouch-service-${VERSION}-${asset}"
 }